Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. P. Wangler, B. Blind, S. Nath, R. D. Ryne, and K. R. Crandall, “Beam Dynamics Design and Simulation Studies of the APT Superconducting Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRAR2, pp. 611-613.
[n] A. V. Demyanov, “Application of 235U+ Ion Beams for Increasing the Safety of Operation in Nuclear Reactors for Atomic Power Station (APS)”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper D-03, pp. 148-149.
[n] K. H. Kissler, J. Riche, W. Scandale, and G. Schroeder, “Fast Resonant Extraction from the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3228-3231.
[n] C. L. Gould and J. C. Schuchman, “Vacuum Behaviour of Various Materials with Radiation and Heat”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 821-831.
[n] P. D. Hermes et al., “Improved Aperture Measurements at the LHC and Results from their Application in 2015”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1446-1449. doi:10.18429/JACoW-IPAC2016-TUPMW014
[n] A. Bechtold, C. P. Welsch, U. Ratzinger, A. Schempp, and B. Schlitt, “The RFQ-Drifttube-Combination for The Medicine Synchrotron in Heidelberg”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH480, pp. 782-784.
[n] T. Takayanagi, Y. Irie, J. Kamiya, T. Kawakubo, and I. Sakai, “Design of the Pulse Bending Magnets for the Injection System of the 3-GeV RCS in J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT007, pp. 1048-1050.
[n] A. Skuja, “The Status of CHEER”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2028-2031.
[n] C. N. Barbier, E. E. Dominguez, K. C. Johns, J. R. Weinmeister, and D. E. Winder, “A 2MW Mercury Target for Neutron Production”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR01, pp. XX-XX.
[n] G. Wuestefeld, M. Abo-Bakr, J. Feikes, K. Holldack, U. Schade, and H. W. H??bers, “Powerful, Steady State, Coherent Synchrotron Radiation at BESSY II”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI023, pp. 778-780.
[n] P. Beli, Lj. Vukosavljevi, A. Dobrosavljevi, V. Joci, J. Risti, and I. Kalagin JINR, “Back Extraction System Of The Vincy Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 412-414.
[n] T. Kanesue et al., “Automated Operation of EBIS Injector at BNL”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 153-157. doi:10.18429/JACoW-HB2018-TUA2WD03
[n] A. Letchford and A. Schempp, “A Comparison of 4-Rod and 4-Vane RFQ Fields”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP11E, pp. 1204-1206.
[n] A. I. Hershcovitch, E. D. Johnson, and R. C. Lanza, “The Plasma Window: A Windowless High Pressure-Vacuum Interface for Various Accelerator Applications”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRAL3, pp. 584-586.
[n] H. J. Kim, N. P. Abreu, W. Fischer, and T. Sen, “Studies of Wire Compensation and Beam-beam Interaction in RHIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC059, pp. 3119-3121.
[n] M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Upgrade of BPM DAQ System for SuperKEKB Injector Linac”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC033, pp. 1153-1156.
[n] Y. J. Lin, W.-K. Lau, M.-C. Chou, and W.-Y. Chiang, “Dark current reduction for NSRRC photoinjector system by collimator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2112-2115. doi:10.18429/JACoW-IPAC2024-WEPC63
[n] A. Ijspeert and J. Salminen, “Superconducting Coil Compression by Scissor Laminations”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP016G, pp. 2237-2239.
[n] C. Z. Antoine, S. Berry, and H. Shou, “Hydrogen Surface Analysis of Niobium in Function of Various Electrochemical Conditions”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP05, pp. 596-598.
[n] D. Mihalcea, P. Piot, D. R. Edstrom, T. Sen, and W. D. Rush, “Channeling Radiation Experiment at Fermilab ASTA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 95-98. doi:10.18429/JACoW-IPAC2015-MOPWA009
[n] E. M?®tral and G. Rumolo, “Simulation Study on the Beneficial Effect of Linear Coupling for the Transverse Mode Coupling Instability in the CERN Super Proton Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH058, pp. 2916-2918.
[n] T. Nakamura, Y. Fukuda, and Y. Kishimoto, “Target Ionization Dynamics by Irradiation of X-ray Free-electron Laser Light”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE027, pp. 2200-2202.
[n] I. Barnett, G. Fernqvist, D. Hundzinger, J-C. Perreard, and J. G. Pett, “A Strategy for Controlling the LHC Magnet Currents”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP020G, pp. 2317-2319.
[n] C. Swain, Ö. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “Improvements on the Modified Nomarski Interferometer for Measurements of Supersonic Gas Jet Density Profiles”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 235-238. doi:10.18429/JACoW-LINAC2022-MOPORI06
[n] J. D. Galambos, J. A. Holmes, S. Y. Lee, and D. K. Olsen, “A Particle Core Model for Space Charge Dynamics in Rings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOA02A, pp. 279-281.
[n] M. A. Nozdrin et al., “Accelerator-Based Education Activities at JINR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2455-2457. doi:10.18429/JACoW-IPAC2017-TUPVA153
[n] G. J. Waldschmidt, D. Horan, and L. H. Morrison, “Inductively Coupled, Compact HOM Damper for the Advanced Photon Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP283, pp. 1358-1360.
[n] S. V. Kutsaev et al., “High-Gradient Accelerating Structure for Hadron Therapy Linac, Operating at kHz Repetition Rates”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 126-129. doi:10.18429/JACoW-LINAC2022-MOPOPA22
[n] M. S. Chae, I. S. Ko, J. H. Han, J. H. Hong, and S. J. Park, “Simulation for New Injector Test Facility of PAL-XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD40, pp. 117-119.
[n] E. Wallén, R. Kuravi, S. Marks, and C. Myers, “Magnetic measurements of the ALS-U magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3650-3652. doi:10.18429/JACoW-IPAC2023-WEPM041
[n] R. Schuhmann, “EM Field Simulation Based on Volume Discretization: Finite Integration and Related Approaches”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA1MP01, pp. 41-41.
[n] S. X. Peng et al., “Single-Shot Beam Characterization Device Based on the Pepper-Pot Principle”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD45, pp. 155-157.
[n] P. M. Freeman et al., “A Modular X-Ray Detector for Beamline Diagnostics at LANL”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 725-727. doi:10.18429/JACoW-NAPAC2022-WEPA42
[n] J. Nudell, H. Cease, J. T. Collins, Z. Liu, and C. A. Preissner, “Preliminary Design and Analysis of the FODO Module Support System for the APS-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 83-86. doi:10.18429/JACoW-MEDSI2016-MOPE32
[n] E. Weihreter et al., “A Superconducting 7T Multipole Wiggler for the BESSY II Synchrotron Radiation Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH002, pp. 2450-2452.
[n] N. I. Tarantin, “NEW METHOD OF ELECTROSTATIC ACCELERATING AND STRONG QUADRUPOLE FOCUSING OF CHARGED PARTICLES ON HIGH VOLTAGE ACCELERATORS OF DIRECT ACTION AND ITS POSSIBLE APPLICATIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP26, pp. XX-XX.
[n] S. Vilcins, M. Holz, and D. B. Bandke, “A New Sealing Technology for High Precision Wide Open UHV Vacuum Flange and Waveguide Connections With Metal Gaskets”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 125-128. doi:10.18429/JACoW-MEDSI2018-TUPH37
[n] T. Nakamura, K. Furukawa, T. T. Nakamura, and J.-I. Odagiri, “Upgrading the Control System of the Movable Masks for KEKB”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP074, pp. 546-548.
[n] J. Huguenin, R. Dubois, R. El-Bez, and G. Visconti, “The New 500 keV Single-Gap Pre-injector Tube for the CERN Proton Synchrotron Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-02, pp. 355-364.
[n] V. A. Polyakov and I. S. Shchedrin, “Electron Bunch Space Charge Influence upon Its Energy Spread and Sizes under the Motion in Free Space”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2633-2636.
[n] E. Plouviez et al., “Broadband Bunch by Bunch Feedback for the ESRF using a Single High Resolution and Fast Sampling FPGA DSP”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH082, pp. 2976-2978.
[n] X. Sun, H. Bui, G. Decker, R. T. Keane, R. M. Lill, and B. X. Yang, “Modernization of the Bergoz Multiplexed BPM System for the APS Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC08, pp. 1154-1156.
[n] M. J. Grabski et al., “NEG Thin Film Coating Development for the MAX IV Vacuum System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI044, pp. 3385-3387.
For LaTeX
Use Complete Form
For BibTeX
References
- T. P. Wangler, B. Blind, S. Nath, R. D. Ryne, and K. R. Crandall, “Beam Dynamics Design and Simulation Studies of the APT Superconducting Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRAR2, pp. 611-613.
- A. V. Demyanov, “Application of 235U+ Ion Beams for Increasing the Safety of Operation in Nuclear Reactors for Atomic Power Station (APS)”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper D-03, pp. 148-149.
- K. H. Kissler, J. Riche, W. Scandale, and G. Schroeder, “Fast Resonant Extraction from the CERN SPS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3228-3231.
- C. L. Gould and J. C. Schuchman, “Vacuum Behaviour of Various Materials with Radiation and Heat”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 821-831.
- P. D. Hermes et al., “Improved Aperture Measurements at the LHC and Results from their Application in 2015”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1446-1449.
- A. Bechtold, C. P. Welsch, U. Ratzinger, A. Schempp, and B. Schlitt, “The RFQ-Drifttube-Combination for The Medicine Synchrotron in Heidelberg”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH480, pp. 782-784.
- T. Takayanagi, Y. Irie, J. Kamiya, T. Kawakubo, and I. Sakai, “Design of the Pulse Bending Magnets for the Injection System of the 3-GeV RCS in J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT007, pp. 1048-1050.
- A. Skuja, “The Status of CHEER”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2028-2031.
- C. N. Barbier, E. E. Dominguez, K. C. Johns, J. R. Weinmeister, and D. E. Winder, “A 2MW Mercury Target for Neutron Production”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THVIR01, pp. XX-XX.
- G. Wuestefeld, M. Abo-Bakr, J. Feikes, K. Holldack, U. Schade, and H. W. H??bers, “Powerful, Steady State, Coherent Synchrotron Radiation at BESSY II”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI023, pp. 778-780.
- P. Beli, Lj. Vukosavljevi, A. Dobrosavljevi, V. Joci, J. Risti, and I. Kalagin JINR, “Back Extraction System Of The Vincy Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 412-414.
- T. Kanesue et al., “Automated Operation of EBIS Injector at BNL”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 153-157.
- A. Letchford and A. Schempp, “A Comparison of 4-Rod and 4-Vane RFQ Fields”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP11E, pp. 1204-1206.
- A. I. Hershcovitch, E. D. Johnson, and R. C. Lanza, “The Plasma Window: A Windowless High Pressure-Vacuum Interface for Various Accelerator Applications”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRAL3, pp. 584-586.
- H. J. Kim, N. P. Abreu, W. Fischer, and T. Sen, “Studies of Wire Compensation and Beam-beam Interaction in RHIC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC059, pp. 3119-3121.
- M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Upgrade of BPM DAQ System for SuperKEKB Injector Linac”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC033, pp. 1153-1156.
- Y. J. Lin, W.-K. Lau, M.-C. Chou, and W.-Y. Chiang, “Dark current reduction for NSRRC photoinjector system by collimator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC63, pp. 2112-2115.
- A. Ijspeert and J. Salminen, “Superconducting Coil Compression by Scissor Laminations”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP016G, pp. 2237-2239.
- C. Z. Antoine, S. Berry, and H. Shou, “Hydrogen Surface Analysis of Niobium in Function of Various Electrochemical Conditions”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP05, pp. 596-598.
- D. Mihalcea, P. Piot, D. R. Edstrom, T. Sen, and W. D. Rush, “Channeling Radiation Experiment at Fermilab ASTA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 95-98.
- E. M?®tral and G. Rumolo, “Simulation Study on the Beneficial Effect of Linear Coupling for the Transverse Mode Coupling Instability in the CERN Super Proton Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH058, pp. 2916-2918.
- T. Nakamura, Y. Fukuda, and Y. Kishimoto, “Target Ionization Dynamics by Irradiation of X-ray Free-electron Laser Light”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE027, pp. 2200-2202.
- I. Barnett, G. Fernqvist, D. Hundzinger, J-C. Perreard, and J. G. Pett, “A Strategy for Controlling the LHC Magnet Currents”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP020G, pp. 2317-2319.
- C. Swain, Ö. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “Improvements on the Modified Nomarski Interferometer for Measurements of Supersonic Gas Jet Density Profiles”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 235-238.
- J. D. Galambos, J. A. Holmes, S. Y. Lee, and D. K. Olsen, “A Particle Core Model for Space Charge Dynamics in Rings”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOA02A, pp. 279-281.
- M. A. Nozdrin et al., “Accelerator-Based Education Activities at JINR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2455-2457.
- G. J. Waldschmidt, D. Horan, and L. H. Morrison, “Inductively Coupled, Compact HOM Damper for the Advanced Photon Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP283, pp. 1358-1360.
- S. V. Kutsaev et al., “High-Gradient Accelerating Structure for Hadron Therapy Linac, Operating at kHz Repetition Rates”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 126-129.
- M. S. Chae, I. S. Ko, J. H. Han, J. H. Hong, and S. J. Park, “Simulation for New Injector Test Facility of PAL-XFEL”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD40, pp. 117-119.
- E. Wallén, R. Kuravi, S. Marks, and C. Myers, “Magnetic measurements of the ALS-U magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM041, pp. 3650-3652.
- R. Schuhmann, “EM Field Simulation Based on Volume Discretization: Finite Integration and Related Approaches”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOA1MP01, pp. 41-41.
- S. X. Peng et al., “Single-Shot Beam Characterization Device Based on the Pepper-Pot Principle”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD45, pp. 155-157.
- P. M. Freeman et al., “A Modular X-Ray Detector for Beamline Diagnostics at LANL”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 725-727.
- J. Nudell, H. Cease, J. T. Collins, Z. Liu, and C. A. Preissner, “Preliminary Design and Analysis of the FODO Module Support System for the APS-U Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 83-86.
- E. Weihreter et al., “A Superconducting 7T Multipole Wiggler for the BESSY II Synchrotron Radiation Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH002, pp. 2450-2452.
- N. I. Tarantin, “NEW METHOD OF ELECTROSTATIC ACCELERATING AND STRONG QUADRUPOLE FOCUSING OF CHARGED PARTICLES ON HIGH VOLTAGE ACCELERATORS OF DIRECT ACTION AND ITS POSSIBLE APPLICATIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP26, pp. XX-XX.
- S. Vilcins, M. Holz, and D. B. Bandke, “A New Sealing Technology for High Precision Wide Open UHV Vacuum Flange and Waveguide Connections With Metal Gaskets”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 125-128.
- T. Nakamura, K. Furukawa, T. T. Nakamura, and J.-I. Odagiri, “Upgrading the Control System of the Movable Masks for KEKB”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP074, pp. 546-548.
- J. Huguenin, R. Dubois, R. El-Bez, and G. Visconti, “The New 500 keV Single-Gap Pre-injector Tube for the CERN Proton Synchrotron Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VII-02, pp. 355-364.
- V. A. Polyakov and I. S. Shchedrin, “Electron Bunch Space Charge Influence upon Its Energy Spread and Sizes under the Motion in Free Space”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2633-2636.
- E. Plouviez et al., “Broadband Bunch by Bunch Feedback for the ESRF using a Single High Resolution and Fast Sampling FPGA DSP”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH082, pp. 2976-2978.
- X. Sun, H. Bui, G. Decker, R. T. Keane, R. M. Lill, and B. X. Yang, “Modernization of the Bergoz Multiplexed BPM System for the APS Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC08, pp. 1154-1156.
- M. J. Grabski et al., “NEG Thin Film Coating Development for the MAX IV Vacuum System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI044, pp. 3385-3387.
Back to search