JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Geissler, J. P. Gourber, J. Handerek, B. Leblond, A. Meineke, and H. Riege, “Electron Emission from Ferroelectric Cathodes Excited by Picosecond Laser Pulses with Long Wavelenghs”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1468-1471. 
[n]	P. Shcherbakov et al., “MINIMIZATION OF CABLE LOSSES IN FAST-CYCLING DIPOLE FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP05, pp. XX-XX. 
[n]	A. Masi, G. Conte, R. Losito, and M. Martino, “Driving the LHC Collimators' Stepping Motors over 1 km with High Accuracy avoiding EMI Effects”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS040, pp. 1626-1628. 
[n]	I. Syrachev, V. F. Vogel, H. Mizuno, J. Odagiri, Y. Otake, and S. Tokumoto, “The Results of RF High Power Tests of X-Band Open Cavity RF Pulse Compression System VPM(JLC)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-49, pp. 475-477. 
[n]	J. Lyles and J. Davis, “Improvements to the Cathode-Follower RF Amplifier System for the LANSCE Proton Storage Ring Buncher”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP142, pp. 1001-1003. 
[n]	P. Shcherbakov et al., “COMPARATIVE ANALYSIS OF WIDE APERTURE DIPOLE DESIGNS FOR THE SIS300 RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP04, pp. XX-XX. 
[n]	D. Boussard, E. Brouzet, R. Cappi, and J. Gareyte, “Collective Effects at Very High Intensity in the CERN-PS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3568-3571. 
[n]	A. Masi, M. Lamberti, R. Losito, and M. Martino, “Reduction of Magnetic Interference on the Position Sensors of the LHC Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS039, pp. 1623-1625. 
[n]	H. Nissen and S. Grau, “CERN Safety Alarm Monitoring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS061, pp. 1674-1676. 
[n]	L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626. 
[n]	C. Pagani, E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Design Considerations of a MW-Scale, High-Efficiency, Industrial-Use, Ultraviolet FEL Amplifier”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B12, pp. 773-775. 
[n]	C. Friedrichs, J. Lyles, and J. M. Doub, “Development of a High Speed Crowbar for LANSCE”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P011, pp. 3473-3475. 
[n]	P. A. Posocco, J. K. Pozimski, Y. Xia, and M. J. Merchant, “First Test of The Imperial College Gabor (Plasma) Lens prototype at the Surrey Ion Beam centre”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1598-1600. doi:10.18429/JACoW-IPAC2016-TUPMY024
[n]	E. L. Saldin, V. P. Sarantsev, E. A. Schneidmiller, S. S. Shimanskii, Yu. Ulyanov, and M. V. Yurkov, “On a Possibility to Construct High-Intensity Monochromatic Gamma-Source at HERA and LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 834-837. 
[n]	P. A. Shcherbakov et al., “Materials for Fast Cycling Accelerator Superconducting Magnets”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC005, pp. 331-333. 
[n]	S. Fukumoto et al., “Construction and First Operation of Upgraded Linear Accelerator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-31, pp. 116-118. 
[n]	L. Smith, “Orbit Studies Related to the Berkeley 88-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A10, pp. 45-47. 
[n]	R. Bailey et al., “First Two Years Operational Experience with LEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 848-851. 
[n]	R. Wehrle and J. Moenich, “A Vacuum System for the Argonne 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3792-3795. 
[n]	I. Akimov et al., “Application of HTS Bi-2223 for Current Leads of Superconducting Magnets”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B14, pp. 2178-2180. 
[n]	Y. Miyahara and T. Kawakubo, “Beam Loss in Initial Acceleration Process of KEK Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3532-3535. 
[n]	A. Miura et al., “Beam Loss Detected by Scintillation Monitor”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD43, pp. 149-151. 
[n]	T. Obina et al., “Improvement of Photon Factory Advanced Ring Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE012, pp. 2351-2353. 
[n]	S. Asaoka, T. Igarashi, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Present Status of SOR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2944-2947. 
[n]	R. Nielsen, J. Moenich, and R. Wehrle, “Vacuum Chamber Development for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1666-1669. 
[n]	L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438. 
[n]	J. R. Richardson, “A Simplified Approach”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A03, pp. 7-11. 
[n]	S. Fukumoto et al., “Linac Upgrading and p to H- Conversion”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0018, pp. 135-137. 
[n]	G. Parzen, “Calculating Orbit Properties of F-F Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A09, pp. 40-44. 
[n]	S. Tokumoto, H. Mizuno, Y. Otake, and O. Azuma, “X-Band (11.424 GHz) Sled System”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-33, pp. 133-135. 
[n]	I. Bogdanov et al., “AC Losses Measurements in HTS Coils”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 363-365. doi:10.18429/JACoW-RUPAC2018-WEPSB43
[n]	J. Borer and M. J. de Jonge, “The ISR Beam Position Monitoring System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 913-916. 
[n]	I. I. Degtyarev et al., “Verification of Modern Evaluated Nuclear Data Libraries on the Basis of Integral Experiments Using the RTS&T Code System”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 401-403. doi:10.18429/JACoW-RUPAC2018-WEPSB58
[n]	F. Valentini, T. Hakulinen, L. Hammouti, T. Ladzinski, and P. Ninin, “Formal Methodology for Safety-Critical Systems Engineering at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA04, pp. 918-921. 
[n]	A. A. Pryanichnikov et al., “Numerical Modeling and Development of the Prototype of the Bragg Peak Position Detector Working in Real Time Mode for Hadron Therapy Facilities”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 220-221. doi:10.18429/JACoW-RUPAC2018-TUPSA34
[n]	L. Tkachenko et al., “Development of Fast-Cycling Superconducting Quadrupole and Corrector Magnets for the SIS 300”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC02, pp. 300-302. 
[n]	D. L. Judd, “Session I Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A01, pp. XX-XX. 
[n]	M. Battiaz, M. Harold, G. Suberlucq, and H. H. Umstuetter, “A Strong Focusing Bending Magnet for the CERN  Antiproton Collector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1532-1535. 
[n]	K. Soutome, A. Ando, S. Date, Y. Miyahara, T. Nakamura, and H. Tanaka, “A Local Compensation Scheme for Insertion Devices in the 8 GeV Electron Storage Ring SPring-8”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 660-663. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search