Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. J. Otter, C. Haddock, P. Reeve, and P. Schwandt, “Prototype Magnet Designs and Loss Measurements for the Dual Frequency Booster Synchrotron for TRIUMF's KAON Factory”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 390-393.
[n] N. V. Mokhov, A. I. Drozhdin, and G. W. Foster, “Beam-Induced Energy Deposition Issues in the Very Large Hadron Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH137, pp. 3171-3173.
[n] W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 663-667. doi:10.18429/JACoW-LINAC2016-WE1A05
[n] A. Buteau, G. Abeille, X. Deletoille, J.-F. Lamarre, T. Marion, and L. S. Nadolski, “Inception of a Learning Organization to Improve SOLEIL's Operation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1001. doi:10.18429/JACoW-ICALEPCS2019-WEMPL004
[n] A. Facco et al., “RF Testing of the TRASCO Superconducting Reentrant Cavity for High Intensity Proton Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO022, pp. 2223-2225.
[n] C. Benvenuti, D. Bloess, E. Chiaveri, N. Hilleret, M. Minestrini, and W. Weingarten, “Superconducting Cavities Produced by Magnetron Sputtering”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E01, pp. 445-468.
[n] J. Borburgh et al., “Feasibility Study of a CERN PS Injection at 2 GeV”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS049, pp. 3535-3537.
[n] S. Park, W. J. Corbett, S. M. Gierman, and J. R. Maldonado, “Photocathode Studies for the SPEAR3 Injector RF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD076, pp. 1575-1577.
[n] W. Zhang, W. Eng, C. Pai, J. Sandberg, Y. Tan, and Y. Tian, “A Simplified Approach to Analyze and Model Inductive Voltage Adder”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS092, pp. 2553-2555.
[n] A. Koschik, B. Goddard, W. H?Âfle, G. Kotzian, D. K. Kramer, and T. Kramer, “Abort Gap Cleaning Using the Transverse Feedback System: Simulation and Measurements in the SPS for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP060, pp. 2656-2658.
[n] P. H??lsmann et al., “The New Broadband Accelerating System for the SIS18 Upgrade at GSI”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2755-2758. doi:10.18429/JACoW-IPAC2018-WEPML031
[n] F. Kurian et al., “Measurements with the Upgraded Cryogenic Current Comparator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF30, pp. 583-586.
[n] G. Arduini et al., “Parasitic Energy Loss in the LEP Superconducting Cavities”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V040, pp. 1858-1860.
[n] J. A. Holmes et al., “Computational Beam Dynamics for SNS Commissioning and Operation”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOMPMP01, pp. XX-XX.
[n] A. L. Romanov, A. Valishev, D. L. Bruhwiler, N. M. Cook, and C. C. Hall, “Adaptive Matching of the IOTA Ring Linear Optics for Space Charge Compensation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1152-1154. doi:10.18429/JACoW-NAPAC2016-THPOA23
[n] S. D. Webb, N. M. Cook, and J. S. Eldred, “Effects of Synchrotron Motion on Nonlinear Integrable Optics”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3131-3133. doi:10.18429/JACoW-IPAC2018-THPAF067
[n] A. I. Wawrzyniak et al., “Solaris Project Progress”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA046, pp. 181-183.
[n] M. Xu et al., “CiADS and HIAF Superconducting Cavity Development Status and the Transition to Production Stage”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 273. doi:10.18429/JACoW-SRF2021-MOPCAV008
[n] D. Holmes, “Tevatron Performance Goals for the Coming Decade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODL1, pp. 43-47.
[n] K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n] G. Le Meur and F. Touze, “PRIAM: A Self Consistent Finite Element Code for Particle Simulation in Electromagnetic Fields”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1693-1696.
[n] A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 432-434. doi:10.18429/JACoW-IPAC2016-MOPMW017
[n] Y. Wang et al., “Dynamic Aperture Study of the CEPC Main Ring with Interaction Region”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3795-3797. doi:10.18429/JACoW-IPAC2016-THPOR012
[n] T. A. Welton, “Session V Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E01, pp. 223-223.
[n] M. Alabau et al., “Study of Abnormal Vertical Emittance Growth in ATF Extraction Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP003, pp. 553-555.
[n] R. Garoby et al., “Linac4, a New Injector for the CERN PS Booster”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS057, pp. 1624-1626.
[n] R. Pearsons, A. Harvey, E. Hubbard, M. Schulze, and S. Sheynin, “APT High Energy Linac Intertank Assembly Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA81, pp. 3579-3581.
[n] E. Wooldridge, “Alternate Cavity Designs to Reduce BBU”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH041, pp. 2874-2876.
[n] T. Griesemer et al., “Design development and technological R&D for niobium-cladded beam production targets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4919-4922. doi:10.18429/JACoW-IPAC2023-THPM017
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
[n] A. T. Young et al., “Design of a Compact Permanent Magnet Cyclotron Mass Spectrometer for the Detection and Measurement of Trace Isotopes”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-03, pp. 705-708.
[n] T. J. Ellison, J. C. Collins, D. L. Friesel, W. P. Jones, P. Schwandt, and W. T. Sloan, “Progress in Commissioning the IUCF Cooler”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1608-1611.
[n] A. Harvey, E. Hubbard, M. Schulze, S. Sheynin, D. Barlow, and T. Hunter, “Designs of the Low Energy Intertank Quadrupole Magnets for APT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA80, pp. 3576-3578.
[n] W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
[n] D. J. Nicklaus, G. W. Foster, and V. S. Kashikhin, “First-Principles Simulation and Comparison with Beam Tests for Transverse Instabilities and Damper Performance in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP012, pp. 1300-1302.
[n] J. Naylon and D. K. Kramer, “Development of a High-speed Diagnostics Package for the 0.2 J, 20 fs, 1 kHz Repetition Rate Laser at ELI Beamlines”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC039, pp. 646-649.
[n] I. L. Sheynman and A. Kanareykin, “Self-consistent Transverse Dynamics and Interbunch Energy Exchange in Dielectric Loaded Wakefield Accelerating Structures”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC105, pp. 3224-3226.
[n] A. Winter et al., “Conceptual Design of the ITER Plasma Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP110, pp. 337-339.
[n] A. Riche and D. Schulte, “The Drive Beam Decelerator of CLIC”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4031, pp. 118-120.
[n] S. S. Gilardoni, S. Aumon, E. Effinger, J. Gil Flores, and U. Wienands, “Beam Loss Monitors Comparison at the CERN Proton Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC135, pp. 1341-1343.
[n] Y. Zhao, S. Doebert, A. Latina, and J. Olivares Herrador, “Use of a superconducting solenoid as a matching device for the compact linear collider positron source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 780-783. doi:10.18429/JACoW-IPAC2023-MOPL096
[n] T. S. Mohite, U. Ratzinger, R. Balß, and P. Hülsmann, “Development of a Broad-band Magnetic Alloy Cavity at GSI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC003, pp. 3275-3277.
[n] P. Sp?ñdtke, “Computer Simulation of High-Current DC Ion Beams”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0012, pp. 356-358.
[n] P. A. Chamouard, J. M. Lefebvre, M. Olivier, and M. Prom?®, “Deuterons Acceleration with the SATURNE Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P05, pp. 326-329.
[n] D. B. Shwartz et al., “Present Status of VEPP-2000”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHX02, pp. XX-XX.
[n] K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
For LaTeX
Use Complete Form
For BibTeX
References
- A. J. Otter, C. Haddock, P. Reeve, and P. Schwandt, “Prototype Magnet Designs and Loss Measurements for the Dual Frequency Booster Synchrotron for TRIUMF's KAON Factory”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 390-393.
- N. V. Mokhov, A. I. Drozhdin, and G. W. Foster, “Beam-Induced Energy Deposition Issues in the Very Large Hadron Collider”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH137, pp. 3171-3173.
- W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 663-667.
- A. Buteau, G. Abeille, X. Deletoille, J.-F. Lamarre, T. Marion, and L. S. Nadolski, “Inception of a Learning Organization to Improve SOLEIL's Operation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1001.
- A. Facco et al., “RF Testing of the TRASCO Superconducting Reentrant Cavity for High Intensity Proton Beams”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO022, pp. 2223-2225.
- C. Benvenuti, D. Bloess, E. Chiaveri, N. Hilleret, M. Minestrini, and W. Weingarten, “Superconducting Cavities Produced by Magnetron Sputtering”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E01, pp. 445-468.
- J. Borburgh et al., “Feasibility Study of a CERN PS Injection at 2 GeV”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS049, pp. 3535-3537.
- S. Park, W. J. Corbett, S. M. Gierman, and J. R. Maldonado, “Photocathode Studies for the SPEAR3 Injector RF Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD076, pp. 1575-1577.
- W. Zhang, W. Eng, C. Pai, J. Sandberg, Y. Tan, and Y. Tian, “A Simplified Approach to Analyze and Model Inductive Voltage Adder”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS092, pp. 2553-2555.
- A. Koschik, B. Goddard, W. H?Âfle, G. Kotzian, D. K. Kramer, and T. Kramer, “Abort Gap Cleaning Using the Transverse Feedback System: Simulation and Measurements in the SPS for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP060, pp. 2656-2658.
- P. H??lsmann et al., “The New Broadband Accelerating System for the SIS18 Upgrade at GSI”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2755-2758.
- F. Kurian et al., “Measurements with the Upgraded Cryogenic Current Comparator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF30, pp. 583-586.
- G. Arduini et al., “Parasitic Energy Loss in the LEP Superconducting Cavities”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V040, pp. 1858-1860.
- J. A. Holmes et al., “Computational Beam Dynamics for SNS Commissioning and Operation”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOMPMP01, pp. XX-XX.
- A. L. Romanov, A. Valishev, D. L. Bruhwiler, N. M. Cook, and C. C. Hall, “Adaptive Matching of the IOTA Ring Linear Optics for Space Charge Compensation”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1152-1154.
- S. D. Webb, N. M. Cook, and J. S. Eldred, “Effects of Synchrotron Motion on Nonlinear Integrable Optics”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3131-3133.
- A. I. Wawrzyniak et al., “Solaris Project Progress”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA046, pp. 181-183.
- M. Xu et al., “CiADS and HIAF Superconducting Cavity Development Status and the Transition to Production Stage”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 273.
- D. Holmes, “Tevatron Performance Goals for the Coming Decade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODL1, pp. 43-47.
- K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2541-2544.
- G. Le Meur and F. Touze, “PRIAM: A Self Consistent Finite Element Code for Particle Simulation in Electromagnetic Fields”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1693-1696.
- A. Kisiel et al., “Performance of the Beam Position Monitor System in Solaris Synchrotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 432-434.
- Y. Wang et al., “Dynamic Aperture Study of the CEPC Main Ring with Interaction Region”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3795-3797.
- T. A. Welton, “Session V Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59E01, pp. 223-223.
- M. Alabau et al., “Study of Abnormal Vertical Emittance Growth in ATF Extraction Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP003, pp. 553-555.
- R. Garoby et al., “Linac4, a New Injector for the CERN PS Booster”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS057, pp. 1624-1626.
- R. Pearsons, A. Harvey, E. Hubbard, M. Schulze, and S. Sheynin, “APT High Energy Linac Intertank Assembly Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA81, pp. 3579-3581.
- E. Wooldridge, “Alternate Cavity Designs to Reduce BBU”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH041, pp. 2874-2876.
- T. Griesemer et al., “Design development and technological R&D for niobium-cladded beam production targets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM017, pp. 4919-4922.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
- A. T. Young et al., “Design of a Compact Permanent Magnet Cyclotron Mass Spectrometer for the Detection and Measurement of Trace Isotopes”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XII-03, pp. 705-708.
- T. J. Ellison, J. C. Collins, D. L. Friesel, W. P. Jones, P. Schwandt, and W. T. Sloan, “Progress in Commissioning the IUCF Cooler”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1608-1611.
- A. Harvey, E. Hubbard, M. Schulze, S. Sheynin, D. Barlow, and T. Hunter, “Designs of the Low Energy Intertank Quadrupole Magnets for APT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA80, pp. 3576-3578.
- W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
- D. J. Nicklaus, G. W. Foster, and V. S. Kashikhin, “First-Principles Simulation and Comparison with Beam Tests for Transverse Instabilities and Damper Performance in the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP012, pp. 1300-1302.
- J. Naylon and D. K. Kramer, “Development of a High-speed Diagnostics Package for the 0.2 J, 20 fs, 1 kHz Repetition Rate Laser at ELI Beamlines”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC039, pp. 646-649.
- I. L. Sheynman and A. Kanareykin, “Self-consistent Transverse Dynamics and Interbunch Energy Exchange in Dielectric Loaded Wakefield Accelerating Structures”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC105, pp. 3224-3226.
- A. Winter et al., “Conceptual Design of the ITER Plasma Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP110, pp. 337-339.
- A. Riche and D. Schulte, “The Drive Beam Decelerator of CLIC”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4031, pp. 118-120.
- S. S. Gilardoni, S. Aumon, E. Effinger, J. Gil Flores, and U. Wienands, “Beam Loss Monitors Comparison at the CERN Proton Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC135, pp. 1341-1343.
- Y. Zhao, S. Doebert, A. Latina, and J. Olivares Herrador, “Use of a superconducting solenoid as a matching device for the compact linear collider positron source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL096, pp. 780-783.
- T. S. Mohite, U. Ratzinger, R. Balß, and P. Hülsmann, “Development of a Broad-band Magnetic Alloy Cavity at GSI”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC003, pp. 3275-3277.
- P. Sp?ñdtke, “Computer Simulation of High-Current DC Ion Beams”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0012, pp. 356-358.
- P. A. Chamouard, J. M. Lefebvre, M. Olivier, and M. Prom?®, “Deuterons Acceleration with the SATURNE Linac”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P05, pp. 326-329.
- D. B. Shwartz et al., “Present Status of VEPP-2000”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHX02, pp. XX-XX.
- K. N. Leung, “Invited Paper: High-Intensity Sources for Light Ions”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-02, pp. 372-376.
Back to search