Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
[n] S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
[n] A. Jejcic, M. Auguin, F. Boeri, J. Maillard, J. Silva, and A. Vincent-Carrefour, “Accelerator Simulation on a Parallel Computer”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1178-1181.
[n] M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
[n] D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 607-609.
[n] B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1350-1353. doi:10.18429/JACoW-IPAC2023-TUPA001
[n] E. Barr, S. Peggs, and C. Saltmarsh, “Relational Databases for SSC Design and Control”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1666-1669.
[n] B. Feinberg, G. Behrsing, K. Halbach, J. Marks, M. Morrison, and D. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-04, pp. 312-314.
[n] S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 257-260.
[n] W. K. van Asselt, L. A. Ahrens, P. R. Cameron, S. Mandell, G. A. Smith, and W. Zhang, “The Tune Meter Systems at the AGS Complex”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1273-1276.
[n] R. A. Beth, “Complex Methods for Three-Dimensional Magnetic Fields”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 901-904.
[n] R. Palmer and J. S. Berg, “A Model for Determining Dipole, Quadrupole and Combined Function Magnet Costs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF086, pp. 1807-1809.
[n] S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 886-890. doi:10.18429/JACoW-ICALEPCS2017-TUPHA194
[n] Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
[n] J. L. Martins, S. Fonseca, C. Joshi, S. F. Martins, W. B. Mori, and L. O. Silva, “Emission of Collimated X-Ray Radiation in Laser-Wakefield Experiments Using Particle Tracking in PIC Simulations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP071, pp. 2958-2960.
[n] B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
[n] K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
[n] A. Furman, “Hourglass Effects for Asymmetric Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 422-425.
[n] W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
[n] K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
- S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
- A. Jejcic, M. Auguin, F. Boeri, J. Maillard, J. Silva, and A. Vincent-Carrefour, “Accelerator Simulation on a Parallel Computer”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1178-1181.
- M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
- D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 607-609.
- B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA001, pp. 1350-1353.
- E. Barr, S. Peggs, and C. Saltmarsh, “Relational Databases for SSC Design and Control”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1666-1669.
- B. Feinberg, G. Behrsing, K. Halbach, J. Marks, M. Morrison, and D. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-04, pp. 312-314.
- S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 257-260.
- W. K. van Asselt, L. A. Ahrens, P. R. Cameron, S. Mandell, G. A. Smith, and W. Zhang, “The Tune Meter Systems at the AGS Complex”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1273-1276.
- R. A. Beth, “Complex Methods for Three-Dimensional Magnetic Fields”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 901-904.
- R. Palmer and J. S. Berg, “A Model for Determining Dipole, Quadrupole and Combined Function Magnet Costs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF086, pp. 1807-1809.
- S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 886-890.
- Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
- J. L. Martins, S. Fonseca, C. Joshi, S. F. Martins, W. B. Mori, and L. O. Silva, “Emission of Collimated X-Ray Radiation in Laser-Wakefield Experiments Using Particle Tracking in PIC Simulations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP071, pp. 2958-2960.
- B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
- K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
- A. Furman, “Hourglass Effects for Asymmetric Colliders”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 422-425.
- W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
- K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
Back to search