JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Schneider et al., “REBCO sample testing for a HTS high Q cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3067-3070. doi:10.18429/JACoW-IPAC2023-WEPA183
[n]	A. V. Tsakanian, M. Ivanyan, and J. Rossbach, “Longitudinal and Transverse Impedances of XFEL Kicker Vacuum Chamber”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP076, pp. 1712-1714. 
[n]	V. Rodin et al., “Power deposition studies for betatron halo losses in HL-LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 610-613. doi:10.18429/JACoW-IPAC2023-MOPL036
[n]	E. Bleser and R. Thern, “Analysis of Magnetic Field Measurement Results for the AGS Booster Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 45-48. 
[n]	A-M. Valente, H. L. Phillips, H. Wang, A. Wu, and G. Wu, “Niobium Thin Film Cavity Deposition by ECR Plasma”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF074, pp. 1108-1110. 
[n]	G. Horlitz, M. Clausen, H. Herzog, R. Lange, and H. Lierl, “The Cryogenic Operation of the Superconducting Magnet System in the HERA Proton Storage Ring: Cool Down, Steady State Operation, Quench Recovery Processes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2319-2322. 
[n]	J. X. Chen et al., “Application of Remote Installation and Measurement Smart Vehicle in Accelerator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 217-219. doi:10.18429/JACoW-MEDSI2018-WEPH08
[n]	P. Jardin et al., “ECRISs at GANIL Today and Tomorrow”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper FRYA01, pp. 195-199. 
[n]	J. Barale et al., “Performance of the Bevalac”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1672-1675. 
[n]	J. Shannon, C. A. Forrester, and K. A. Ralphs, “Diamond Light Source Athena Platform”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1115-1119. doi:10.18429/JACoW-ICALEPCS2023-TH1BCO05
[n]	S. Johnson and D. Capista, “A Programmable Beam Intensity Display System for the Fermilab Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1505-1508. 
[n]	C. Adolphsen et al., “Pulse to Pulse Stability Issues in the SLC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG11, pp. 646-648. 
[n]	R. M. Mobley, G. Gammel, and A. W. Maschke, “Gabor Lenses”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3112-3115. 
[n]	F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459. 
[n]	J. Olszewski, F.-J. Decker, R. H. Iverson, A. Kulikov, and G. C. Pappas, “Dual Power Supplies for PEP-II Injection Kickers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE079, pp. 4045-4047. 
[n]	M. Mehler, O. Boine-Frankenheim, O. Chorniy, and O. K. Kester, “Longitudinal Dynamics of Intense Heavy-Ion Bunches in SIS-100”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR003, pp. 2937-2939. 
[n]	G. Rehm, A. F. D. Morgan, and C. Thomas, “Beam Diagnostics Systems for the Diamond Synchrotron Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT127, pp. 2765-2767. 
[n]	A. Matheisen, R. Bandelmann, K. Escherich, N. Krupka, and H. Morales Zimmermann, “A New High Pressure Rinsing System Established at DESY”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO073, pp. 794-796. 
[n]	J. L. Conradie, J. C. Cornell, D. T. Fourie, and G. C. W. Lloyd, “Measurements of Quadrupole Magnets”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-12, pp. 321-324. 
[n]	K. A. Ralphs and J. W. Handford, “Future Acquisition Architecture Investigations at Diamond”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1241. doi:10.18429/JACoW-ICALEPCS2019-WEPHA060
[n]	M. Arruat, S. Jackson, J-L. Nougaret, and M. Peryt, “Equipment Software Modelling for Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_001. 
[n]	D. Dohan et al., “Requirements for a New Resonator Structure at TRIUMF”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J06, pp. 357-359. 
[n]	J. Thibus and A. Schempp, “Simulations for the Frankfurt Funneling Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS043, pp. 1591-1593. 
[n]	T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2510-2513. doi:10.18429/JACoW-IPAC2023-TUPM122
[n]	S. Jiang and X. Liu, “Multi-object optimization based on high gradient C-band photoinjector”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM084, unpublished. 
[n]	R. B. Miller et al., “Beam Transport Issues in High Current Linear Accelerators”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3343-3346. 
[n]	I. Podadera et al., “Beam Diagnostics for the Multi-MW High Energy Beam Transport Line of DONES”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 200-204. doi:10.18429/JACoW-IBIC2019-MOPP042
[n]	T. Torims et al., “Perspectives and recent achievements on additive manufacturing technologies for accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3890-3892. doi:10.18429/JACoW-IPAC2024-THPS62
[n]	W. Chou, “Overview of proton driver studies for neutrino and muon factories”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAY01, pp. 64-68. 
[n]	J. W. Wang et al., “Wakefield Measuremetns of SLAC Linac Structures at the Argonne AATF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3219-3222. 
[n]	U. Bechstedt et al., “Field Measurement of the Magnets for COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1379-1382. 
[n]	G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3029-3031. 
[n]	F.-J. Decker, M. Stanek, H. Smith, and F. Tian, “Diagnostic Beam Pulses for Monitoring the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC20, pp. 2646-2648. 
[n]	C. Liu, B. Hong, L. Ruckman, R. Herbst, and E. Nanni, “Direct RF sampling based LLRF control system for C-band linear accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 25-28. doi:10.18429/JACoW-IPAC2024-MOCN2
[n]	C. Rubbia, “The Quest for Dark Matter”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper WOPB004, unpublished. 
[n]	J. C. Cornell, J. L. Conradie, and D. T. Fourie, “Beamlines for a Second Injector Cyclotron at NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XD-06, pp. 621-624. 
[n]	D. Einfeld, E. Al-Dmour, M. Attal, G. Vignola, H. Hassanzadegan, and H. Tarwneh, “SESAME, a Synchrotron Light Source for the Middle East Region”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM101, pp. XX-XX. 
[n]	Y.-M. Wang, S.-I. Kwon, A. H. Regan, and T. S. Rohlev, “System Identification of the Linac RF System Using a Wavelet Method and Its Applications in the SNS LLRF Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH301, pp. 1613-1615. 
[n]	R. A. Rimmer et al., “High-Power Testing of RF Cavities for the PEP-II B Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P040, pp. 3004-3006. 
[n]	Y. Bao, G. Hansen, and D. V. Neuffer, “Phase Rotation of Muon Beams for Producing Intense Low-energy Muon Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1556-1558. doi:10.18429/JACoW-IPAC2016-TUPMY008
[n]	P. Krejcik, R. Assmann, F.-J. Decker, S. Hartman, R. Miller, and T. Raubenheimer, “Direct Measurement of Transverse Wakefields in the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB02, pp. 659-661. 
[n]	M. Ivanyan et al., “Geometric resonance of the wakefield of a metal-dielectric waveguide”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB015, unpublished. 
[n]	F. Krienen, “Charged Particle Storage Device”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP79, pp. 3134-3136. 
[n]	A. Gabriel et al., “Evaluation of ultrafast THz near-fields for electron streaking”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 675-677. doi:10.18429/JACoW-IPAC2024-MOPR92
[n]	S. Ramamoorthy, S. Buda, J. Oliva, and G. Ramirez, “PLC Interface to NSLS Front-End Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP511, pp. XX-XX. 
[n]	J. T. Seeman, F. J. Decker, I. Hsu, and R. K. Jobe, “Multibunch Energy and Spectrum Control in the SLC High Energy Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3210-3213. 
[n]	S. M. Cousineau et al., “Development of Injection and Optics Control Applications for the SNS Accumulator Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT166, pp. 2849-2851. 
[n]	J. L. Conradie et al., “Development of the NAC Accelerator Facilities”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-19, pp. 95-98. 
[n]	J. Grillenberger and M. Schneider, “PSI HIPA Facility: Operation and Upgrade Plans”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper TUA4I1, unpublished. 
[n]	F. P. Adams, E. R. Gaudette, and J. Ungrin, “Phase-Dependent Quadrupole Effects in On-Axis Coupled Linacs”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-34, pp. 392-394. 
[n]	J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2832-2835. 
[n]	D. Reagan, “A Device to Measure Quadrupole Gradient-Length Product”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4058-4061. 
[n]	J. M. Jowett, K. L. F. Bane, A. Hofmann, P. L. Morton, W. Spence, and R. Stege, “Beam Response Measurements at SPEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 726-729. 
[n]	P. Tenenbaum et al., “Beam-Based Optical Tuning of the Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC20, pp. 749-751. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search