Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Talanov et al., “Neutron Doses Due to Beam Losses in a Novel Concept of a Proton Therapy Gantry”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4736-4739. doi:10.18429/JACoW-IPAC2017-THPVA123
[n] Q. Kerns et al., “Fermilab Tevatron High Level RF Accelerating Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2809-2812.
[n] G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
[n] C. M. Lyneis, “Invited Paper: Operational Performance of the LBL 88-Inch Cyclotron with an ECR Source”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-02, pp. 707-712.
[n] J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 238-240. doi:10.18429/JACoW-MEDSI2018-WEPH16
[n] S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 805-807.
[n] J. Fernandez Cortes, E. Blanco Vinuela, J. Beckers, O. Kozinski, and P. Durand, “Integration of new cryogenic plants into an existing control system: a scalable and standardized approach”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1331-1337. doi:10.18429/JACoW-ICALEPCS2025-THAR004
[n] S. De Santis, J. M. Byrd, A. Ratti, Y. Yin, Y. Y. Labs, and M. S. Zolotorev, “Fiberoptics-based Instrumentation for Storage Ring Longitudinal Diagnostics”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH100, pp. 1247-1249.
[n] D. J. Clark and C. M. Lyneis, “Heavy Ion Development at the LBL 88-Inch Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-01, pp. 170-173.
[n] N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
[n] R. Figueiras dos Santos, E. Blanco Vinuela, and J. Fernandez Cortes, “Scalable and standardized PLC development: an automated framework for CERN's Cooling and Ventilation systems”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1849-1854. doi:10.18429/JACoW-ICALEPCS2025-THPD104
[n] R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Smooth Rapid Current Build-up”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2400-2403.
[n] M. Kireeff Covo et al., “Upgrade and Commissioning of the 88-Inch Cyclotron Final Power Amplifier”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC064, pp. 229-231.
[n] M. Geitz et al., “A Hilbert Transform Spectrometer Using a High TC Josephson Junction for Bunch Length Measurements at the TESLA Test Facility Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA133, pp. 2178-2180.
[n] W. Roybal, D. C. Nguyen, W. Reass, D. Rees, P. J. Tallerico, and P. A. Torrez, “A 700 MHZ, 1 MW CW RF System for a FEL 100mA RF Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT036, pp. 2413-2415.
[n] M. Hagelstein et al., “Design, Development and Testing of Diagnostic Systems for Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP068, pp. 2417-2419.
[n] P. Corredoura et al., “Commissioning Experience with the PEP-II Low Level RF System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P052, pp. 2359-2361.
[n] F. M?®ot, P. N. Joshi, J. P. Lidestri, M. R. Subramanian, and N. Tsoupas, “Tracking Dynamic Aperture in the iRCMS Hadrontherapy Synchrotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2442-2444. doi:10.18429/JACoW-IPAC2022-THPOST005
[n] H. P. Chang, C. C. Kuo, M. H. Wang, and W. T. Weng, “Beam Lifetime Investigations at SRRC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP119G, pp. 697-699.
[n] W. J. Leonhardt, J. R. Cullen, and P. F. Gill, “Stress Rupture Considerations in the Design of Large Aperture, Low Mass Composite Vacuum Windows”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P002, pp. 3583-3585.
[n] V. Androsov et al., “Progress In Development Of Kharkov X-Ray Generator Nestor”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_005.
[n] O. Ferrando and E. Karantzoulis, “Main Beam Dump Transfer Line for the FERMI@ELETTRA LINAC”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC10, pp. 255-257.
[n] A. Latina et al., “CompactLight Design Study”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 85-88. doi:10.18429/JACoW-FLS2018-WEP1WC02
[n] P. K. Roy et al., “Initial Results on Neutralized Drift Compression Experiments (NDCX-IA) for High Intensity Ion Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE071, pp. 3856-3858.
[n] A. A. Shcherbakov et al., “Commissioning of the Storage Ring for the Kharkov Generator of X-Ray Radiation NESTOR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4307-4309. doi:10.18429/JACoW-IPAC2018-THPMK008
[n] J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300.
[n] S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2865-2868.
[n] K. H?Âppner et al., “Development of a Web-based Shift Reporting Tool for Accelerator Operation at the Heidelberg Ion Beam Therapy Center”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC106, pp. 822-824.
[n] H. Braun, H. Herminghaus, and A. Streun, “The Gun/Chopper System for the MAINZ Microtron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 997-1000.
[n] R. Sah et al., “RF Breakdown Studies Using Pressurized Cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP046, pp. 184-186.
[n] K.Nakanishi; K.Hara; A.Honma; K.Hosoyama; A.Kabe; Y.Kojima; H.Nakai; K.Akai; K.Ebihara; T.Furuya; S.Mitsunobu; Y.Morita; M.Ono; Y.Yamamoto, “COMMISSIONING OF CRAB CAVITY SYSTEM”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH04, pp. XX-XX.
[n] K. Junck et al., “Commissioning and First Operational Experience of the 400 MeV linac at Fermilab”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 751-754.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Talanov et al., “Neutron Doses Due to Beam Losses in a Novel Concept of a Proton Therapy Gantry”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4736-4739.
- Q. Kerns et al., “Fermilab Tevatron High Level RF Accelerating Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2809-2812.
- G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
- C. M. Lyneis, “Invited Paper: Operational Performance of the LBL 88-Inch Cyclotron with an ECR Source”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper M-02, pp. 707-712.
- J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 238-240.
- S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 805-807.
- J. Fernandez Cortes, E. Blanco Vinuela, J. Beckers, O. Kozinski, and P. Durand, “Integration of new cryogenic plants into an existing control system: a scalable and standardized approach”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1331-1337.
- S. De Santis, J. M. Byrd, A. Ratti, Y. Yin, Y. Y. Labs, and M. S. Zolotorev, “Fiberoptics-based Instrumentation for Storage Ring Longitudinal Diagnostics”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH100, pp. 1247-1249.
- D. J. Clark and C. M. Lyneis, “Heavy Ion Development at the LBL 88-Inch Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F1-01, pp. 170-173.
- N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
- R. Figueiras dos Santos, E. Blanco Vinuela, and J. Fernandez Cortes, “Scalable and standardized PLC development: an automated framework for CERN's Cooling and Ventilation systems”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1849-1854.
- R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Smooth Rapid Current Build-up”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2400-2403.
- M. Kireeff Covo et al., “Upgrade and Commissioning of the 88-Inch Cyclotron Final Power Amplifier”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC064, pp. 229-231.
- M. Geitz et al., “A Hilbert Transform Spectrometer Using a High TC Josephson Junction for Bunch Length Measurements at the TESLA Test Facility Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA133, pp. 2178-2180.
- W. Roybal, D. C. Nguyen, W. Reass, D. Rees, P. J. Tallerico, and P. A. Torrez, “A 700 MHZ, 1 MW CW RF System for a FEL 100mA RF Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT036, pp. 2413-2415.
- M. Hagelstein et al., “Design, Development and Testing of Diagnostic Systems for Superconducting Undulators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP068, pp. 2417-2419.
- P. Corredoura et al., “Commissioning Experience with the PEP-II Low Level RF System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P052, pp. 2359-2361.
- F. M?®ot, P. N. Joshi, J. P. Lidestri, M. R. Subramanian, and N. Tsoupas, “Tracking Dynamic Aperture in the iRCMS Hadrontherapy Synchrotron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2442-2444.
- H. P. Chang, C. C. Kuo, M. H. Wang, and W. T. Weng, “Beam Lifetime Investigations at SRRC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP119G, pp. 697-699.
- W. J. Leonhardt, J. R. Cullen, and P. F. Gill, “Stress Rupture Considerations in the Design of Large Aperture, Low Mass Composite Vacuum Windows”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P002, pp. 3583-3585.
- V. Androsov et al., “Progress In Development Of Kharkov X-Ray Generator Nestor”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_005.
- O. Ferrando and E. Karantzoulis, “Main Beam Dump Transfer Line for the FERMI@ELETTRA LINAC”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC10, pp. 255-257.
- A. Latina et al., “CompactLight Design Study”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 85-88.
- P. K. Roy et al., “Initial Results on Neutralized Drift Compression Experiments (NDCX-IA) for High Intensity Ion Beam”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE071, pp. 3856-3858.
- A. A. Shcherbakov et al., “Commissioning of the Storage Ring for the Kharkov Generator of X-Ray Radiation NESTOR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4307-4309.
- J. J. Song et al., “MM-Wave Cavity/Klystron Developments Using Deep X-Ray Lithography at the Advanced Photon Source”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E204, pp. 298-300.
- S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2865-2868.
- K. H?Âppner et al., “Development of a Web-based Shift Reporting Tool for Accelerator Operation at the Heidelberg Ion Beam Therapy Center”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC106, pp. 822-824.
- H. Braun, H. Herminghaus, and A. Streun, “The Gun/Chopper System for the MAINZ Microtron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 997-1000.
- R. Sah et al., “RF Breakdown Studies Using Pressurized Cavities”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP046, pp. 184-186.
- K.Nakanishi; K.Hara; A.Honma; K.Hosoyama; A.Kabe; Y.Kojima; H.Nakai; K.Akai; K.Ebihara; T.Furuya; S.Mitsunobu; Y.Morita; M.Ono; Y.Yamamoto, “COMMISSIONING OF CRAB CAVITY SYSTEM”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH04, pp. XX-XX.
- K. Junck et al., “Commissioning and First Operational Experience of the 400 MeV linac at Fermilab”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 751-754.
Back to search