JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers titles are all uppercase, you must correct this before using this reference.

Favourites


For Word

[n]	H. Hahn and S. Tepikian, “On the Longitudinal Coupling Impedance of a Toroidal Beam Tube”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1043-1046. 
[n]	M. Calvi et al., “Summary of the U15 Prototype Magnetic Performance”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP041, pp. 111-115. 
[n]	C. Yao, N. P. Di Monte, and W. E. Norum, “An FPGA-Based Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN116, pp. 440-442. 
[n]	M. P. Stockli et al., “Operating the SNS RF H? Ion Source with a 10% Duty Factor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1951-1953. doi:10.18429/JACoW-IPAC2019-TUPTS009
[n]	O. Kumar, N. Falls, and S. Philip, “Jefferson Lab’s 20A Bipolar Trim power supply for Very Low Inductance Load”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM091, unpublished. 
[n]	C. Antoine, J. Gaiffier, H. Chalaye, and J. F. Roche, “Hydroforming at C. E.A. Saclay: First Results”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C20, pp. 598-605. 
[n]	B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692. 
[n]	K. Nii et al., “Impact of Vertical Electropolishing with Flipping System on Removal Uniformity and Surface State: Study with 9-Cell Niobium Coupon Cavity”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 783. doi:10.18429/JACoW-SRF2021-THPCAV003
[n]	P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258. 
[n]	C. Maglioni, M. Delonca, M. Gil Costa, and A. Vacca, “Use of Silicon Carbide as Beam Intercepting Device Material: Tests, Issues and Numerical Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3998-4000. doi:10.18429/JACoW-IPAC2014-THPRI096
[n]	K. Nohara et al., “Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2869-2872. doi:10.18429/JACoW-IPAC2015-WEPMA046
[n]	?à. Andersson, M. Eriksson, M. Georgsson, G. LeBlanc, L.-J. Lindgren, and S. Werin, “MAX-III, a 700 MeV Storage Ring for Synchrotron Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A19, pp. 643-644. 
[n]	H. Maesaka et al., “Electron Beam Diagnostic System for the Japanese XFEL, SACLA”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOIC02, pp. 38-46. 
[n]	M. A. Mamun et al., “Production of Magnetized Electron Beam from a DC High Voltage Photogun”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4567-4570. doi:10.18429/JACoW-IPAC2018-THPMK108
[n]	D. A. Herrup, D. Finley, and G. Jackson, “Luminosity Lifetime in the Tevatron Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1824-1827. 
[n]	K. N. Nii et al., “Vertical Electropolishing of Niobium Nine-Cell Cavity with a Cavity Flipping System for Uniform Removal”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 467-469. doi:10.18429/JACoW-SRF2019-TUP027
[n]	V. Vuppala et al., “Distributed Information Services for Control Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOBA02, pp. 1000-1003. 
[n]	H. Maesaka et al., “Beam Diagnostic System of XFEL/SPring-8”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOOA03, pp. 11-13. 
[n]	V. Chouhan et al., “Symmetric Removal of Niobium Superconducting RF Cavity in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB105, pp. 409-413. 
[n]	T. Konomi, F. Furuta, K. Saito, and F. Yasuda, “Development of the Demountable Damped Cavity”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO038, pp. 172-176. 
[n]	D. Dohan, “The IRMIS Universal Component-Type Model”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA03, pp. 82-83. 
[n]	M. D. Salt, R. Appleby, K. Elsener, and A. Ferrari, “Photon Backgrounds at the CLIC Interaction Point due to Losses in the Post-Collision Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP070, pp. 2659-2661. 
[n]	Y. Yuri et al., “Beam Uniformization System Using Multipole Magnets at the JAEA AVF Cyclotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC045, pp. 3077-3079. 
[n]	X. Y. Xu, J. W. Xia, and P. Yuan, “A Program on Magnet Optimization Design”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-21, pp. 526-527. 
[n]	L. Wang, H. Fukuma, S. Kurokawa, K. Ohmi, and K. Oide, “Photoelectron Trapping in Electric and Magetic Field”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO007, pp. 1586-1588. 
[n]	E. Ferrari et al., “Dispersion-Free Steering Beam Based Alignment at SwissFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1163-1166. doi:10.18429/JACoW-IPAC2022-TUPOPT065
[n]	X. Zhao et al., “Surface Characterization of Niobium Samples Electropolished Together with Real Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO086, pp. 441-445. 
[n]	J. W. Xia, B. W. Wei, and W. L. Zhan, “Cooler Storage Ring at China Institute of Modern Physics”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPD003, pp. 271-275. 
[n]	A. Akiyama et al., “Control System of the KEKB Accelerator Complex”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPB04, pp. 268-270. 
[n]	M. Signorelli, Y. Cai, and G. Hoffstaetter, “BAGELS: A general method for minimizing the rate of radiative depolarization in electron storage rings”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 262-265. doi:10.18429/JACoW-IPAC2024-MOPC81
[n]	M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 261-264. doi:10.18429/JACoW-IBIC2018-TUPB03
[n]	F. Simoens and A. France, “Tuning Procedure of The 5 MeV IPHI RFQ”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH486, pp. 794-796. 
[n]	S. Y. Lee and S. Tepikian, “The Chaotic Dynamical Aperture”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2225-2228. 
[n]	M. Titov, B. List, S. Stapnes, and T. Saeki, “Sustainability studies for future linear colliders”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUOGB2, unpublished. 
[n]	S. M. Matsubara et al., “Measurement of the Timing Jitter Between a Time Reference Signal and EUV-FEL Pulses at XFEL/SPring-8”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC10, pp. 520-523. 
[n]	I. Yu. Vakhrushin et al., “UEL-10-D New Linear Electron Accelerator for Non-Destructive Testing”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC029, pp. 382-383. 
[n]	M. E. McIntyre et al., “In-Situ Plasma Processing on a 172 MHz HWR Cavity at the Argonne Tandem Linac Accelerator System”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 219-223. doi:10.18429/JACoW-SRF2023-MOPMB049
[n]	A. Burrill et al., “Multipacting Analysis of a Quarter Wave Choke Joint used for Insertion of a Demountable Cathode into a SRF Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS089, pp. 2544-2546. 
[n]	V. Chouhan et al., “Recent Development in Vertical Electropolishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THBA02, pp. 1024-1030. 
[n]	G. Muelhaupt, G. Schmidt, and U. Weinrich, “First Results of Beam Storing in the ESRF Booster Synchrotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP037G, pp. 635-637. 
[n]	T. Satogata, K. Brown, F. Pilat, A. Alai Tafti, S. Tepikian, and J. van Zeijts, “The RHIC/AGS Online Model Environment: Design and Overview”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA48, pp. 2728-2730. 
[n]	R. Kazimi et al., “Observation and Mitigation of Multipass BBU in CEBAF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP087, pp. 2722-2724. 
[n]	S. Tazzari, “The ARES Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 317-320. 
[n]	C. C. Liang et al., “TLS Operation Information Management: Automatic Logging Tools”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA052, pp. 3261-3263. 
[n]	E. Tikhomolov, “Visualization of Interlocks with EPICS Database and EDM Embedded Windows”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1066-1069. doi:10.18429/JACoW-ICALEPCS2015-WEPGF154
[n]	Ph. Guid?®e and J. Peyromaure, “A New Approach for High-Power Solid-State Drivers Used for Wide-Band RF Acceleration”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-10, pp. 180-183. 
[n]	A. A. Komkov, O. L. Maslennikov, V. F. Petrov, V. L. Smirnov, and B. A. Sokolov, “Input Coupler for Superconducting Accelerator Structure”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1407-1410. 
[n]	Y. Zhang, H. B. Chen, Q. Gao, and J. Shi, “THEORY RESEARCH ON APPLICATION OF CT TECHNOLOGY TO SHIELDED NUCLEAR MATERIAL DISCRIMINATION”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA019, pp. 3669-3671. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search