Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Pogorelsky, W. D. Kimura, L. C. Steinhauer, and J. R. Fontana, “Design Analysis for a 100-MeV Inverse Cherenkov Laser Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2614-2617.
[n] M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
[n] I. Sato et al., “A Simulation Study on Beam Bunching in the KEK 2.5-GeV Linac New Pre-Injector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3705-3708.
[n] Y. Yang et al., “The gamma activation measurements at Shanghai Laser Electron Gamma Source (SLEGS)”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3714-3717. doi:10.18429/JACoW-IPAC2024-THPR86
[n] K. Sato et al., “A MOPA RF System for the INS 176cm SF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-13, pp. 419-421.
[n] A. P. Rocha et al., “Vacuum Controls Configurator: A Web Based Configuration Tool for Large Scale Vacuum Control Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 512. doi:10.18429/JACoW-ICALEPCS2019-MOPHA123
[n] G. Giordano et al., “Beam Dynamics Issues in an Extended Relativistic Klystron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC17, pp. 740-742.
[n] T. Tomimasu et al., “Commissioning of SAGA Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE078, pp. 4021-4023.
[n] C. E. Crist et al., “Time Resolved, 2-D Hard X-ray Imaging of Relativistic Electron-Beam Target Interactions on ETA-II”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4062, pp. 195-197.
[n] M. T. Crofford et al., “Spallation Neutron Source Proton Power Upgrade Low-Level RF Control System Development”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3363-3366. doi:10.18429/JACoW-IPAC2021-WEPAB299
[n] P. Marchand, J. Cherix, C. Geiselhart, M. Pedrozzi, W. Portmann, and W. Tron, “Operation of the SLS RF System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI009, pp. 712-714.
[n] D. S?ínchez-Valdepe, M. Carroll, A. Nordt, and M. Zaera-Sanz, “Implementation of the PLC based Machine Protection System for Magnets at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 555. doi:10.18429/JACoW-ICALEPCS2019-MOPHA139
[n] A. Schmidt et al., “A multi-voltage FEBIAD ion source for the study of molecular properties”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEC03, unpublished.
[n] B. Podobedov et al., “White X-ray beam position monitor for coherent soft X-ray beamlines”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2195-2198. doi:10.18429/JACoW-IPAC2024-WEPG09
[n] S. Sampayan et al., “High Gradient Insulator Technology for the Dielectric Wall Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA19, pp. 1269-1271.
[n] G. Guignard, K. Potter, and A. Verdier, “Interaction Regions for e-p and p-p Collisions in the LEP Tunnel”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2535-2538.
[n] D. E. Lobb, “A High Flux Muon Channel Incorporating a High Quality Spectrometer Field”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3194-3197.
[n] A. Brauch et al., “Status of the new bunch length measurement system downstream of the injector of the S-DALINAC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2415-2417. doi:10.18429/JACoW-IPAC2024-WEPG84
[n] R. D. Ruth, “Test Facilities for Future Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG03, pp. 616-620.
[n] Y. G. Song, H. S. Kim, J. H. Kim, and H.-J. Kwon, “Beam Gate Control System for the Proton Injector and Beamlines on KOMAC”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 552. doi:10.18429/JACoW-ICALEPCS2019-MOPHA138
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] A. Brauch et al., “Bunch Length Measurement System Downstream the Injector of the S-DALINAC”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 200-203. doi:10.18429/JACoW-IBIC2023-TUP009
[n] P. Strubin and N. Trofimov, “Control and Operational Models for Vacuum Equipment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P037, pp. 2440-2442.
[n] Y. W. Kang, P. J. Matthews, and R. L. Kustom, “A Constant Gradient Planar Accelerating Structure for Linac Use”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG10, pp. 643-645.
[n] E. W. Blackmore et al., “Achievement and Control of the 100 uA Beam at TRIUMF”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-04, pp. 2320-2324.
[n] M. Borland, “A Self-Describing File Protocol for Simulation Integration and Shared Post-Processors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE11, pp. 2184-2186.
[n] R. Oliveira Neto, R. Junqueira Le?úo, and L. R. Le?úo, “Alignment Verification and Monitoring Strategies for the Sirius Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2210-2213. doi:10.18429/JACoW-IPAC2021-TUPAB309
[n] J. H. Yue, Y. Li, Z. J. Ma, Y. Xie, and L. Yu, “The Measurement and Controlling System of Beam Current for Weak Current Accelerator”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 697-699. doi:10.18429/JACoW-IBIC2016-WEPG33
[n] D. Schneider et al., “Development of an Active Beam-Stabilization System for Electrofission Experiments at the S-Dalinac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 111-114. doi:10.18429/JACoW-IBIC2023-MOP038
[n] J.-Y. Hemery, A. Hofmann, J.-P. Koutchouk, S. Myers, and L. Vos, “Investigation of the Coherent Beam-Beam Effects in the ISR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2497-2500.
[n] M. Arruat, S. Jackson, J-L. Nougaret, and M. Peryt, “Equipment Software Modelling for Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_001.
[n] R. Burge, G. Dennison, and D. Dohan, “Precision NMR Measurement of the TRIUMF Cyclotron Magnetic Field”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B17, pp. 82-84.
[n] Z. Yang et al., “The application of laser-irradiated pyroelectric crystals in neutron generators”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS137, unpublished.
[n] U. Bechstedt et al., “Field Measurement of the Magnets for COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1379-1382.
[n] C. Bloomer, G. Rehm, and A. Tipper, “Fast Feedback Using Electron Beam Steering to Maintain the X-Ray Beam Position at a Monochromatic X-Ray Diagnostic at Diamond Light Source”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 172-176. doi:10.18429/JACoW-IBIC2019-MOPP032
[n] Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
[n] M. Arnold et al., “Recent Achievements at S-DALINAC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFAV01, pp..
[n] W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
[n] R. Burge and R. Vader, “A Beam Phase Measuring System for the TRIUMF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-04, pp. 593-595.
[n] H. Hanaki et al., “New Pre-Injector of the KEK 2.5-GeV Linac and Its Performance”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3087-3090.
[n] D. E. Lobb and P. A. Reeve, “A Proposed Superferric Combined Function Magnet”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B18, pp. 85-88.
[n] S. A. Martin et al., “COSY-A Cooler Synchrotron and Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2694-2697.
[n] L. Strobino, N. Magnin, and N. Voumard, “Consolidation of the Power Trigger Controllers of the LHC Beam Dumping System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1439-1443. doi:10.18429/JACoW-ICALEPCS2023-THPDP056
[n] J. Rossbach, “Options and Trade-Offs in Linear Collider Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG02, pp. 611-615.
[n] W. R. Rawnsley, G. H. Mackenzie, and C. J. Oram, “The Production and Measurement of 150 ps Beam Pulses from the TRIUMF Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E04, pp. 237-240.
[n] P. P. Goryl et al., “Tango Controls RFCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 317-321. doi:10.18429/JACoW-ICALEPCS2021-TUBL03
[n] C. R. Ader, M. W. McGee, L. E. Nobrega, and E. A. Voirin, “Overview of Fabrication Techniques and Lessons Learned with Accelerator Vacuum Windows”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 51-54. doi:10.18429/JACoW-IPAC2018-MOZGBE4
[n] H. J. Kwon, Y. S. Cho, Y. H. Kim, M. Y. Park, K. T. Seol, and C. B. Shim, “Operation of the High Power RF System for PEFP RFQ”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21005, pp. XX-XX.
[n] A. Latina, P. Eliasson, L. Neukermans, G. Rumolo, and D. Schulte, “Recent Improvements of PLACET”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP03, pp. 188-190.
[n] M. Slupecki et al., “Development of new ion beams at the CERN ion injector complex for future physics programmes”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 718-721. doi:10.18429/JACoW-IPAC2025-MOPS047
[n] N. I. Abramenko et al., “A Multiple-Beam Ion RF Accelerator with Alternating-Phase Focussing: Status Report”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 595-597.
[n] A. M. Sessler, “The Electron Ring Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-2, pp. 606-607.
[n] R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 334-337. doi:10.18429/JACoW-HB2018-WEP2PO032
For LaTeX
Use Complete Form
For BibTeX
References
- I. Pogorelsky, W. D. Kimura, L. C. Steinhauer, and J. R. Fontana, “Design Analysis for a 100-MeV Inverse Cherenkov Laser Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2614-2617.
- M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
- I. Sato et al., “A Simulation Study on Beam Bunching in the KEK 2.5-GeV Linac New Pre-Injector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3705-3708.
- Y. Yang et al., “The gamma activation measurements at Shanghai Laser Electron Gamma Source (SLEGS)”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR86, pp. 3714-3717.
- K. Sato et al., “A MOPA RF System for the INS 176cm SF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-13, pp. 419-421.
- A. P. Rocha et al., “Vacuum Controls Configurator: A Web Based Configuration Tool for Large Scale Vacuum Control Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 512.
- G. Giordano et al., “Beam Dynamics Issues in an Extended Relativistic Klystron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC17, pp. 740-742.
- T. Tomimasu et al., “Commissioning of SAGA Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE078, pp. 4021-4023.
- C. E. Crist et al., “Time Resolved, 2-D Hard X-ray Imaging of Relativistic Electron-Beam Target Interactions on ETA-II”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4062, pp. 195-197.
- M. T. Crofford et al., “Spallation Neutron Source Proton Power Upgrade Low-Level RF Control System Development”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3363-3366.
- P. Marchand, J. Cherix, C. Geiselhart, M. Pedrozzi, W. Portmann, and W. Tron, “Operation of the SLS RF System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI009, pp. 712-714.
- D. S?ínchez-Valdepe, M. Carroll, A. Nordt, and M. Zaera-Sanz, “Implementation of the PLC based Machine Protection System for Magnets at ESS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 555.
- A. Schmidt et al., “A multi-voltage FEBIAD ion source for the study of molecular properties”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEC03, unpublished.
- B. Podobedov et al., “White X-ray beam position monitor for coherent soft X-ray beamlines”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG09, pp. 2195-2198.
- S. Sampayan et al., “High Gradient Insulator Technology for the Dielectric Wall Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA19, pp. 1269-1271.
- G. Guignard, K. Potter, and A. Verdier, “Interaction Regions for e-p and p-p Collisions in the LEP Tunnel”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2535-2538.
- D. E. Lobb, “A High Flux Muon Channel Incorporating a High Quality Spectrometer Field”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3194-3197.
- A. Brauch et al., “Status of the new bunch length measurement system downstream of the injector of the S-DALINAC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG84, pp. 2415-2417.
- R. D. Ruth, “Test Facilities for Future Linear Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG03, pp. 616-620.
- Y. G. Song, H. S. Kim, J. H. Kim, and H.-J. Kwon, “Beam Gate Control System for the Proton Injector and Beamlines on KOMAC”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 552.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- A. Brauch et al., “Bunch Length Measurement System Downstream the Injector of the S-DALINAC”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP009, pp. 200-203.
- P. Strubin and N. Trofimov, “Control and Operational Models for Vacuum Equipment”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P037, pp. 2440-2442.
- Y. W. Kang, P. J. Matthews, and R. L. Kustom, “A Constant Gradient Planar Accelerating Structure for Linac Use”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG10, pp. 643-645.
- E. W. Blackmore et al., “Achievement and Control of the 100 uA Beam at TRIUMF”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-04, pp. 2320-2324.
- M. Borland, “A Self-Describing File Protocol for Simulation Integration and Shared Post-Processors”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE11, pp. 2184-2186.
- R. Oliveira Neto, R. Junqueira Le?úo, and L. R. Le?úo, “Alignment Verification and Monitoring Strategies for the Sirius Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2210-2213.
- J. H. Yue, Y. Li, Z. J. Ma, Y. Xie, and L. Yu, “The Measurement and Controlling System of Beam Current for Weak Current Accelerator”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 697-699.
- D. Schneider et al., “Development of an Active Beam-Stabilization System for Electrofission Experiments at the S-Dalinac”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP038, pp. 111-114.
- J.-Y. Hemery, A. Hofmann, J.-P. Koutchouk, S. Myers, and L. Vos, “Investigation of the Coherent Beam-Beam Effects in the ISR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2497-2500.
- M. Arruat, S. Jackson, J-L. Nougaret, and M. Peryt, “Equipment Software Modelling for Accelerator Controls”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O5_001.
- R. Burge, G. Dennison, and D. Dohan, “Precision NMR Measurement of the TRIUMF Cyclotron Magnetic Field”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B17, pp. 82-84.
- Z. Yang et al., “The application of laser-irradiated pyroelectric crystals in neutron generators”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS137, unpublished.
- U. Bechstedt et al., “Field Measurement of the Magnets for COSY-Juelich”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1379-1382.
- C. Bloomer, G. Rehm, and A. Tipper, “Fast Feedback Using Electron Beam Steering to Maintain the X-Ray Beam Position at a Monochromatic X-Ray Diagnostic at Diamond Light Source”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 172-176.
- Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
- M. Arnold et al., “Recent Achievements at S-DALINAC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFAV01, pp..
- W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107.
- R. Burge and R. Vader, “A Beam Phase Measuring System for the TRIUMF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-04, pp. 593-595.
- H. Hanaki et al., “New Pre-Injector of the KEK 2.5-GeV Linac and Its Performance”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3087-3090.
- D. E. Lobb and P. A. Reeve, “A Proposed Superferric Combined Function Magnet”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B18, pp. 85-88.
- S. A. Martin et al., “COSY-A Cooler Synchrotron and Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2694-2697.
- L. Strobino, N. Magnin, and N. Voumard, “Consolidation of the Power Trigger Controllers of the LHC Beam Dumping System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP056, pp. 1439-1443.
- J. Rossbach, “Options and Trade-Offs in Linear Collider Design”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG02, pp. 611-615.
- W. R. Rawnsley, G. H. Mackenzie, and C. J. Oram, “The Production and Measurement of 150 ps Beam Pulses from the TRIUMF Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper E04, pp. 237-240.
- P. P. Goryl et al., “Tango Controls RFCs”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 317-321.
- C. R. Ader, M. W. McGee, L. E. Nobrega, and E. A. Voirin, “Overview of Fabrication Techniques and Lessons Learned with Accelerator Vacuum Windows”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 51-54.
- H. J. Kwon, Y. S. Cho, Y. H. Kim, M. Y. Park, K. T. Seol, and C. B. Shim, “Operation of the High Power RF System for PEFP RFQ”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21005, pp. XX-XX.
- A. Latina, P. Eliasson, L. Neukermans, G. Rumolo, and D. Schulte, “Recent Improvements of PLACET”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP03, pp. 188-190.
- M. Slupecki et al., “Development of new ion beams at the CERN ion injector complex for future physics programmes”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS047, pp. 718-721.
- N. I. Abramenko et al., “A Multiple-Beam Ion RF Accelerator with Alternating-Phase Focussing: Status Report”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 595-597.
- A. M. Sessler, “The Electron Ring Accelerator”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-2, pp. 606-607.
- R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 334-337.
Back to search