JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	I. Rodriguez and A. Letchford, “Design of a QWR cavity for the new ISIS MEBT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2227-2229. doi:10.18429/JACoW-IPAC2023-TUPM017
[n]	G. Bienvenu and P. Brunet, “Dark Current under Low and High Electric Field”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 775-778. 
[n]	D. E. Nagle, “Status and Performance of LAMPF”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper A02, pp. 4-11. 
[n]	D. Schultz et al., “The Polarized Electron Source of the Stanford Linear Accelerator Center”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-02, pp. 676-680. 
[n]	M. P. Bourgarel et al., “First Results of the 14.5 GHz GANIL ECR Source with the C. W. and the Pulsed Operation Mode”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 645-647. 
[n]	J. Keane et al., “Bunch Lengthening Control Using the Fourth Harmonic Cavity in the VUV Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 138-141. 
[n]	T. S. Jaffery, J. Butteris, and M. Wake, “Automated Methods of Field Harmonic Signal Extraction and Processing for the Magnets in Superconducting Supercollider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ32, pp. 1465-1468. 
[n]	M. Quispe et al., “Experimental studies of thermal contact conductance between copper, stainless steel and aluminum samples using a setup developed at ALBA Synchrotron Light Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB031, unpublished. 
[n]	J. W. Staples, J. J. Ayers, D. W. Cheng, J. B. Greer, M. D. Hoff, and A. Ratti, “The SNS Four-Phase LEBT Chopper”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA32, pp. 1961-1963. 
[n]	M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872. 
[n]	R. Paparella et al., “Operational Experience of the European-XFEL 3.9 GHz Coaxial Tuners”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 240-244. doi:10.18429/JACoW-SRF2017-MOPB077
[n]	M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815. 
[n]	J. Keane et al., “NSLS RF System Improvements”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2784-2786. 
[n]	V. fM, W. Coosemans, G. Ramseier, A. A. Sery, A. I. Sleptsov, and I. Wilson, “Seismic Vibration Studies for Future Linear Colliders”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2573-2576. 
[n]	S. Brooks, “Industrial manufacturing of nonlinear field permanent magnets for a constant tune medical FFA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB040, unpublished. 
[n]	S. Shiraishi and R. Tesarek, “Diffusion in Tevatron Using Flying Wire”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP007, pp. 3199-3201. 
[n]	J. A. Holmes, V. Danilov, J. D. Galambos, A. V. Fedotov, and R. L. Gluckstern, “Resonant Beam Response in the PSR Accumulator Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH305, pp. 3188-3190. 
[n]	M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2594-2598. doi:10.18429/JACoW-IPAC2023-WEYD1
[n]	I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4105-4108. doi:10.18429/JACoW-IPAC2023-THPA062
[n]	M. Siano et al., “FOCUS: Fast Monte-CarlO Approach to Coherence of Undulator Sources”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 257-260. doi:10.18429/JACoW-IBIC2022-TUP16
[n]	D. R. Machen, “A Computer-Based, Data-Acquisition and Control System for LAMPF Beam Diagnostics”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper E-2, pp. 385-394. 
[n]	Z. Chen, D. Z. Chen, K. F. Liu, and B. Qin, “Magnetic Field Calculation and Magnet Shimming Simulation for the CYCHU-10 Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP013, pp. 69-71. 
[n]	A. Sukhanov and J. Morris, “Secure Role-Based Access Control for RHIC Complex”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1150-1154. doi:10.18429/JACoW-ICALEPCS2023-TH2AO05
[n]	J. L. Giorgetta, A. Lestrade, A. Mary, and K. Tavakoli, “Design of Girders on the New Upgrade Lattice at Soleil”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 218. doi:10.18429/JACoW-MEDSI2020-WEOA02
[n]	W. P. Johnson and P. K. Sigg, “Improvements in the Michigan State University Cyclotron RF System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 492-495. 
[n]	P. Klysubun, T. Pulampong, and P. Sudmuang, “Design and Optimisation of SPS-II Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2773-2775. doi:10.18429/JACoW-IPAC2017-WEPAB086
[n]	K. I. Blomqvist, P. Elleaume, C. Limborg, Y. Nosochkov, J. Safranek, and A. Terebilo, “Nonlinear Dynamics in SPEAR Wigglers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUODF103, pp. 295-297. 
[n]	Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000. 
[n]	T. Kikuchi, K. Horioka, and S. Kawata, “Particle Dynamics at Stagnation Point during Longitudinal Bunch Compression of High Current Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN049, pp. 3339-3341. 
[n]	J. Zhai et al., “High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 17-20. doi:10.18429/JACoW-LINAC2024-MOAA003
[n]	S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3401-3404. doi:10.18429/JACoW-IPAC2024-THPG60
[n]	G. S. Nusinovich and V. L. Granatstein, “Criteria for Comparing the Suitability of Microwave Amplifiers for Driving TeV Linear Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2572-2575. 
[n]	J. Rothman, R. Michta, R. Nawrocky, A. Batrakov, V. Shilo, and S. Kuznetsov, “Self Triggered, Single Turn Beam Position Monitor for Electron Storage Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA86, pp. 2081-2083. 
[n]	W. Merz, S. Sarkar, J. Gannon, and F. Meyer, “Controls Interface Protocols for the SSC Correction and 'DC' Magnet Power Supplies”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1898-1901. 
[n]	S. S. Som et al., “Commissioning Experience of the RF System of K500 Superconducting Cyclotron at VECC”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP058, pp. 162-164. 
[n]	R. K. Agrawal et al., “Implementation and Experience of Energy Ramping for Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA085, pp. 443-445. 
[n]	H. Fitze, “DEVELOPMENTS AT PSI (INCLUDING NEW RF CAVITY)”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18B3, pp. XX-XX. 
[n]	L. Zhang et al., “2 MeV LIA Injector Design”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4110, pp. 332-334. 
[n]	L. Perrot and R. Ollier, “Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 86-89. doi:10.18429/JACoW-IPAC2019-MOPGW011
[n]	O. G. Grimm et al., “Longitudinal Bunch Shape Diagnostics with Coherent Radiation and a Transverse Deflecting Cavity at TTF2”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS07, pp. XX-XX. 
[n]	G. P. Lawrence, “Critical Design Issues of High Intensity Proton Linacs”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 236-241. 
[n]	D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX. 
[n]	R. Duperrier, R. Ferdinand, N. Pichoff, and D. Uriot, “Beams Dynamics End to End Simulations in IFMIF Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE099, pp. 1335-1337. 
[n]	B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983. 
[n]	B. Angerth et al., “The Cold Vacuum System of the Large Hadron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2467-2470. 
[n]	J. J. Yang, A. Adelmann, M. Humbel, G. Seidel, and T. J. Zhang, “Numerical Study of Beam Dynamics in High Intensity Cyclotrons Including Neighboring Bunch Effects”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA33, pp. 178-182. 
[n]	K. Artoos et al., “Transport and Installation of the LHC Cryo-Magnets”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN067, pp. 305-307. 
[n]	O. A. Shevchenko et al., “The VUV/UV OK-5 Duke Storage Ring FEL with Variable Polarization”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH330, pp. 2833-2835. 
[n]	J. J. Kritzinger, R. E. F. Fenemore, G. Hardman, M. J. van Niekerk, and A. H. Botha, “A Wide-Range Radio-Frequency System for an 8 MeV Injector Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J11, pp. 373-376. 
[n]	A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518. 
[n]	A. S. Raja Rao, “Status of SRS INDUS-2”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A003, pp. 641-644. 
[n]	I. P. S. Martin et al., “Orbit Stability Studies for the Diamond-II Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2602-2605. doi:10.18429/JACoW-IPAC2022-THPOPT017
[n]	W. Benker et al., “Investigations of Intense Pulsed Electron Beams From PSEUDO - SPARK Discharges”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1135-1138. 
[n]	M. M?ñrki, R. H?ñussler, P. Lanz, H. P. Leber, N. Schmid, and U. Schryber, “Generation of a High Voltage Trapezoidal Wave Form for a us-Pulsed Beam System at S.I.N.”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-17, pp. 2190-2193. 
[n]	J. C. Juillard and E. Peschardt, “Damping of Longitudinal Coupled Dipole Bunch Oscillations in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1554-1557. 
[n]	S. Jaster-Merz et al., “Characterization of the Full Transverse Phase Space of Electron Bunches at ARES”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 952-955. doi:10.18429/JACoW-IPAC2021-MOPAB302
[n]	P. Tenenbaum and T. Raubenheimer, “Quadrupole Centering and Beam Steering in the Next Linear Collider Main Linacs”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA07, pp. 50-52. 
[n]	K. Halbach, E. Hoyer, S. Marks, D. Plate, and D. Shuman, “CSEM-Steel Hybrid Wiggler/Undulator Magnetic Field Studies”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3640-3643. 
[n]	V. V. Anashin, O. B. Malyshev, I. L. Maslennikov, V. N. Osipov, and W. C. Turner, “Experimental Investigation of Dynamic Pressure in a Cryosorbing Beam Tube Exposed to Synchrotron Radiation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2506-2509. 
[n]	S. J. Werkema, “Record Luminosities at the Tevatron amp; Future Potentiality”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUXMA02, pp. 51-55. 
[n]	J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 394-396. doi:10.18429/JACoW-ICALEPCS2017-TUPHA012
[n]	D. W. Cheng et al., “Design of the Prototype Low Energy Beam Transport Line for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA31, pp. 1958-1960. 
[n]	D. A. Ovsyannikov, “Mathematical Modeling and Optimization of Beam Dynamics in Accelerators”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUZCH02, pp. 68-72. 
[n]	M. A. Green, S. P. Virostek, and S. Q. Yang, “Calculating the Muon Cooling within a MICE Liquid Absorber”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH189, pp. 502-504. 
[n]	H. Leboutet, S. Joly, and C. Perraudin, “Low-Beta Structures for CW Operation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W003, pp. 1117-1119. 
[n]	A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725. 
[n]	P. Bosland, S. Cantacuz?¿ne, J. Gobin, M. Juillard, and J. Martignac, “NbTiN Thin Films for RF Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I45, pp. XX-XX. 
[n]	A. H. Botha et al., “Operation and Development of the NAC Accelerator Facilities”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-01, pp. 80-83. 
[n]	J. Cerny III et al., “BEARS (Berkeley Experiments with Accelerated Radioactive Species)”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THDL7, pp. 533-535. 
[n]	A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73. 
[n]	B. L. Cathey, A. V. Aleksandrov, S. M. Cousineau, and A. P. Zhukov, “Technical Workings of the 6D Phase Measurement at SNS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1107-1109. doi:10.18429/JACoW-IPAC2018-TUPAL044
[n]	P. Sunwong et al., “Commissioning and Operation of Superconducting Multipole Wiggler at Siam Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2398-2400. doi:10.18429/JACoW-IPAC2021-TUPAB375
[n]	C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n]	I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1927-1930. 
[n]	H. Baumgartner, “The Cyclotron Kids' 2 MeV Proton Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE1PB05, pp. 302-304. 
[n]	R. Kowalewicz et al., “Beam Test with the CERN Plasma Lens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1539-1542. 
[n]	J. L. Revol et al., “Operation and Recent Developments of the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB013, pp. 854-856. 
[n]	X. Jian, D. Chen, M. Fan, B. Qin, Y. Xiong, and T. Yu, “Modeling and Beam Dynamic Visualization in Cyclotron Virtual Prototyping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG024, pp. 3509-3511. 
[n]	A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 6-10. doi:10.18429/JACoW-MEDSI2018-TUOPMA04
[n]	T. G. Lee, J. S. Hong, G. I. Kwon, W. R. Lee, and T. H. Tak, “New Data Acquisition System Implemented Based on MTCA.4 Form Factor for KSTAR Diagnostic System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 593-596. doi:10.18429/JACoW-ICALEPCS2017-TUPHA080
[n]	A. Krusche, H. Kugler, and J. P. Potier, “The Beam Cutting Ejection from the CERN Electron-Positron Accumulator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1595-1598. 
[n]	J. C. Chang, C. Y. Liu, J. R. Chen, and M. T. Ke, “Air Temperature Analysis and Control Improvement for the Large-Scale Experimental Hall”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99908, pp. XX-XX. 
[n]	R. Gupta, A. Jain, J. Muratore, P. Wanderer, E. Willen, and C. Wyss, “Change in Field Harmonics after Quench and Thermal Cycles in Superconducting Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P005, pp. 3347-3349. 
[n]	F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3085-3088. 
[n]	R. B. Nussbaumer et al., “Cryogenics Controls in the ISAC-II Superconducting RF Accelerator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THD006, pp. 919-921. 
[n]	G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 343-346. 
[n]	G. K. Sahoo, K. Balewski, and A. Kling, “Post-Mortem Analysis of BPM-Interlock Triggered Beam Dumps at PETRA-III”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD22, pp. 43-45. 
[n]	A. I. Drozhdin et al., “Collimation System Design for Beam Loss Localization with Slipstacking Injection in the Fermilab Main Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS016, pp. 1688-1690. 
[n]	R. Bailey et al., “First Two Years Operational Experience with LEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 848-851. 
[n]	U. Trinks, “The Superconducting Separated Orbit Cyclotron Triton”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-11, pp. XX-XX. 
[n]	Y. Yuasa et al., “A Monitoring System for a Gas-Sheet Beam Profile Monitor on Linux with EPICS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP579, pp. XX-XX. 
[n]	F. Richard, J. Gueulette, J. P. Meulders, P. Pihet, S. Vynckier, and A. Wambersie, “Neutrontherapy with p(65) Neutrons at the UCL Cyclotron of Louvain-la-Neuve”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1818-1821. 
[n]	H. S. Butler, B. L. Hartway, D. R. Machen, and T. M. Putnam, “An Operator's Console for the LAMPF Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 419-422. 
[n]	P. Belochitskii et al., “Beam Optics Issues for the Antiproton Decelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V011, pp. 1382-1384. 
[n]	P. F. Ma et al., “Beam Commissioning of a 325 MHz Proton IH-DTL at XiPAF”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1777-1780. doi:10.18429/JACoW-IPAC2021-TUPAB168

For LaTeX

Use Complete Form

For BibTeX

References

Back to search