Favourites
For Word
[n] H. Hayano, “ATF Linac Commissioning”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper WE101, pp. 547-551.
[n] M. A. Drury et al., “Current Results From Acceptance Testing of LCLS-II Cryomodules at Jefferson Lab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1007-1010. doi:10.18429/JACoW-SRF2019-THP056
[n] R. L. Williams and K. D. Gebre-Amlak, “Studies on the Interactions of a Probe Electron Beam with Relativistic Plasma Waves”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA129, pp. 3681-3683.
[n] T. Scarvie, W. Barry, M. J. Chin, D. Robin, F. Sannibale, and C. Steier, “Diagnostic Systems Plan for the Advanced Light Source Top-Off Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE080, pp. 4066-4068.
[n] D. C. Faircloth et al., “Initial Results from the Front End Test Stand High Performance H- Ion Source at RAL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP040, pp. 445-447.
[n] R. Paparella et al., “Operational Experience of the European-XFEL 3.9 GHz Coaxial Tuners”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 240-244. doi:10.18429/JACoW-SRF2017-MOPB077
[n] P. K. Saha et al., “Measurement of the Stripping Efficiency for HBC Stripper Foil in the 3-GeV RCS of J-PARC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS040, pp. 3511-3513.
[n] R. R. Geraldes et al., “The Design of Exactly-Constrained X-Ray Mirror Systems for Sirius”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 173-178. doi:10.18429/JACoW-MEDSI2018-WEOAMA04
[n] R. B. Palmer and R. C. Fernow, “Charge Separation for Muon Collider Cooling”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP001, pp. 103-105.
[n] S. Machida, “FFAGs as Muon Accelerators for a Neutrino Factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS024, pp. 1541-1543.
[n] Y.-H. Liu et al., “The DC and AC Withstands Test for TPS Booster Injection Kicker”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 554-556. doi:10.18429/JACoW-IPAC2014-MOPME079
[n] S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
[n] N. Akasaka, S. Hiramatsu, H. Koiso, M. Masuzawa, K. Satoh, and M. Tejima, “Beam-Based Calibration of Beam Position Monitors and Measurements of the Sextupole Magnet Offsets at KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A16, pp. 1780-1782.
[n] T. Sugimoto, K. Fan, K. Ishii, H. Matsumoto, K. Abe, and S. Fukuoka, “Development of a Non-inductive Ceramic Resistor”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA004, pp. 669-671.
[n] G. Wu et al., “Low Impedance Bellows for High-current Beam Operations”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC042, pp. 2303-2305.
[n] B. P. M. Liggins, J. W. McKenzie, P. H. Williams, and J. K. Jones, “Jitter Tolerance for CLARA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA060, pp. 1271-1273.
[n] H. Wang, J. C. Gallardo, and R. B. Palmer, “Short-Range Wakefield in a Flat Pillbox Cavity Generated by a Sub-Relativistic Beam Bunch”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH078, pp. 3024-3026.
[n] S. Dewan et al., “1400A,+/-900V Peak Pulse Switch Mode Power Supplies for SNS Injection Kickers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE015, pp. 770-772.
[n] Y. Takeda, Y. Irie, and I. Sugai, “Ultra-high Resolution Observation Device for Carbon Stripper Foil”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS086, pp. 1740-1742.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hayano, “ATF Linac Commissioning”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper WE101, pp. 547-551.
- M. A. Drury et al., “Current Results From Acceptance Testing of LCLS-II Cryomodules at Jefferson Lab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1007-1010.
- R. L. Williams and K. D. Gebre-Amlak, “Studies on the Interactions of a Probe Electron Beam with Relativistic Plasma Waves”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA129, pp. 3681-3683.
- T. Scarvie, W. Barry, M. J. Chin, D. Robin, F. Sannibale, and C. Steier, “Diagnostic Systems Plan for the Advanced Light Source Top-Off Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE080, pp. 4066-4068.
- D. C. Faircloth et al., “Initial Results from the Front End Test Stand High Performance H- Ion Source at RAL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP040, pp. 445-447.
- R. Paparella et al., “Operational Experience of the European-XFEL 3.9 GHz Coaxial Tuners”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 240-244.
- P. K. Saha et al., “Measurement of the Stripping Efficiency for HBC Stripper Foil in the 3-GeV RCS of J-PARC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS040, pp. 3511-3513.
- R. R. Geraldes et al., “The Design of Exactly-Constrained X-Ray Mirror Systems for Sirius”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 173-178.
- R. B. Palmer and R. C. Fernow, “Charge Separation for Muon Collider Cooling”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP001, pp. 103-105.
- S. Machida, “FFAGs as Muon Accelerators for a Neutrino Factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS024, pp. 1541-1543.
- Y.-H. Liu et al., “The DC and AC Withstands Test for TPS Booster Injection Kicker”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 554-556.
- S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
- N. Akasaka, S. Hiramatsu, H. Koiso, M. Masuzawa, K. Satoh, and M. Tejima, “Beam-Based Calibration of Beam Position Monitors and Measurements of the Sextupole Magnet Offsets at KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A16, pp. 1780-1782.
- T. Sugimoto, K. Fan, K. Ishii, H. Matsumoto, K. Abe, and S. Fukuoka, “Development of a Non-inductive Ceramic Resistor”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA004, pp. 669-671.
- G. Wu et al., “Low Impedance Bellows for High-current Beam Operations”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC042, pp. 2303-2305.
- B. P. M. Liggins, J. W. McKenzie, P. H. Williams, and J. K. Jones, “Jitter Tolerance for CLARA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA060, pp. 1271-1273.
- H. Wang, J. C. Gallardo, and R. B. Palmer, “Short-Range Wakefield in a Flat Pillbox Cavity Generated by a Sub-Relativistic Beam Bunch”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH078, pp. 3024-3026.
- S. Dewan et al., “1400A,+/-900V Peak Pulse Switch Mode Power Supplies for SNS Injection Kickers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE015, pp. 770-772.
- Y. Takeda, Y. Irie, and I. Sugai, “Ultra-high Resolution Observation Device for Carbon Stripper Foil”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS086, pp. 1740-1742.
Back to search