Favourites
For Word
[n] S. Sampayan et al., “Experimental Investigation of Beam Optics Issues at the Bremsstrahlung Converters for Radiographic Applications”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4103, pp. 314-316.
[n] A. E. Grelick et al., “A High Peak Power S-Band Switching System for the Advanced Photon Source APS Linear Accelerator Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4065, pp. 914-916.
[n] R. Saban et al., “The Preparation of the Cryomagnets and the Assembly of the LHC Test String 2”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH087, pp. 3433-3435.
[n] A. Bungau and R. J. Barlow, “Wakefield Calculations - Comparison between Simulations and Experimental Data”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP007, pp. 562-564.
[n] G. Tromba, M. Fabretto, and A. Rindi, “The Shielding of Electron Accelerators: A Montecarlo Evaluation of Gamma Source Terms”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1389-1392.
[n] J. Yang et al., “Femtosecond RF Gun Based MeV Electron Diffraction”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROAN4, pp. 2558-2560.
[n] B. Dwersteg, U. Klein, W.-D. Moeller, A. Palussek, D. Proch, and H. Vogel, “Experiment of the First Prototypes of Pipe Cooled 500 MHz Cavities from Explosion Bonded Niobium Copper”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1430-1433.
[n] M. Castellano et al., “Early Results of Beam Acceleration in The SC Linac LISA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 731-733.
[n] A. Mayoral, M. Garc?¡a, D. L??pez, F. Ogando, J. Sanz, and P. Sauvan, “Beam Stop of Spiral2 Facility: Activation and Residual Dose Rate Calculations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP003, pp. 811-813.
[n] T. P. Wangler et al., “Design of a Proton Superconducting Linac for a Neutron Spallation Source”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEA001, pp. 336-344.
[n] C. K. Sinclair, “CEBAF: Project Status and Front End Test Results”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO1-01, pp. 3-7.
[n] A. Winter et al., “Conceptual Design of the ITER Plasma Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP110, pp. 337-339.
[n] A. I. Titov and S. A. Gavrilov, “Luminescent Diagnostics for Low Intensity Proton Beams at INR RAS Linac”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 489-491. doi:10.18429/JACoW-RUPAC2018-THPSC39
[n] M. M. Karliner, N. V. Mityanina, D. G. Myakishev, and V. P. Yakovlev, “Calculation of Transverse Resistive Impedance for Vacuum Chambers with Arbitrary Cross Sections”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP010G, pp. 1247-1249.
[n] P. Kurdziel, “VDI (Virtual Desktop Infrastructure) Implementation for Control System - Overview and Analysis”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 501-502. doi:10.18429/JACoW-ICALEPCS2017-TUPHA048
[n] F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839.
[n] H. Braun, E. Boggasch, D. H. H. Hoffmann, and A. Tauschwitz, “Application of Plasma Lenses in Positron Sources”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1650-1653.
[n] G. Ciovati, “Where Next with SRF?”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THYB201, pp. 3124-3128.
[n] P. Ninin, “IEC 61508 Experience for the Development of the LHC Functional Safety Systems and Future Perspectives”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC004, pp. 400-402.
[n] M. H. Cho, A. Nassiri, S. Pasky, G. Pile, and T. L. Smith, “Klystron-Modulator System Performance for the Advanced Photon Source Linear Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH093, pp. 987-989.
[n] J. Rahighi et al., “ILSF, A Third Generation Light Source Laboratory in Iran”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB202, pp. 1137-1139.
[n] R. Dortwegt, S. Pasky, and M. White, “Improved Temperature Regulation of APS Linac RF Components”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4103, pp. 1001-1003.
[n] N. Wang and Q. Qin, “Transverse Impedance Calculation for Simplified Model of Ferrite Kicker Magnet with Beta < 1”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS059, pp. 742-744.
[n] T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 389-392. doi:10.18429/JACoW-ICALEPCS2015-MOPGF132
[n] T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
[n] M. Stetter et al., “Investigations on a Plasma Lens for Fine Focusing of Heavy-Ion Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 285-288.
[n] F. Valentini, T. Hakulinen, L. Hammouti, T. Ladzinski, and P. Ninin, “Formal Methodology for Safety-Critical Systems Engineering at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA04, pp. 918-921.
[n] M. Martens, G. Annala, and P. Bauer, “Tune and Coupling Drift Compensation during the Tevatron Injection Porch”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB031, pp. 3359-3361.
[n] A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 593-596.
[n] V. A. Anferov et al., “Siberian Snake Experiments at the IUCF Cooler Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDR1, pp. 392-394.
[n] T. Ladzinski et al., “Access Safety Systems ÔÇô New Concepts from the LHC Experience”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU008, pp. 1066-1069.
[n] K. Eppley et al., “Results of Simulations of High-Power Klystrons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2903-2906.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Sampayan et al., “Experimental Investigation of Beam Optics Issues at the Bremsstrahlung Converters for Radiographic Applications”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4103, pp. 314-316.
- A. E. Grelick et al., “A High Peak Power S-Band Switching System for the Advanced Photon Source APS Linear Accelerator Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4065, pp. 914-916.
- R. Saban et al., “The Preparation of the Cryomagnets and the Assembly of the LHC Test String 2”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH087, pp. 3433-3435.
- A. Bungau and R. J. Barlow, “Wakefield Calculations - Comparison between Simulations and Experimental Data”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP007, pp. 562-564.
- G. Tromba, M. Fabretto, and A. Rindi, “The Shielding of Electron Accelerators: A Montecarlo Evaluation of Gamma Source Terms”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1389-1392.
- J. Yang et al., “Femtosecond RF Gun Based MeV Electron Diffraction”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper FROAN4, pp. 2558-2560.
- B. Dwersteg, U. Klein, W.-D. Moeller, A. Palussek, D. Proch, and H. Vogel, “Experiment of the First Prototypes of Pipe Cooled 500 MHz Cavities from Explosion Bonded Niobium Copper”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1430-1433.
- M. Castellano et al., “Early Results of Beam Acceleration in The SC Linac LISA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 731-733.
- A. Mayoral, M. Garc?¡a, D. L??pez, F. Ogando, J. Sanz, and P. Sauvan, “Beam Stop of Spiral2 Facility: Activation and Residual Dose Rate Calculations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP003, pp. 811-813.
- T. P. Wangler et al., “Design of a Proton Superconducting Linac for a Neutron Spallation Source”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEA001, pp. 336-344.
- C. K. Sinclair, “CEBAF: Project Status and Front End Test Results”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO1-01, pp. 3-7.
- A. Winter et al., “Conceptual Design of the ITER Plasma Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP110, pp. 337-339.
- A. I. Titov and S. A. Gavrilov, “Luminescent Diagnostics for Low Intensity Proton Beams at INR RAS Linac”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 489-491.
- M. M. Karliner, N. V. Mityanina, D. G. Myakishev, and V. P. Yakovlev, “Calculation of Transverse Resistive Impedance for Vacuum Chambers with Arbitrary Cross Sections”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP010G, pp. 1247-1249.
- P. Kurdziel, “VDI (Virtual Desktop Infrastructure) Implementation for Control System - Overview and Analysis”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 501-502.
- F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839.
- H. Braun, E. Boggasch, D. H. H. Hoffmann, and A. Tauschwitz, “Application of Plasma Lenses in Positron Sources”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1650-1653.
- G. Ciovati, “Where Next with SRF?”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THYB201, pp. 3124-3128.
- P. Ninin, “IEC 61508 Experience for the Development of the LHC Functional Safety Systems and Future Perspectives”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC004, pp. 400-402.
- M. H. Cho, A. Nassiri, S. Pasky, G. Pile, and T. L. Smith, “Klystron-Modulator System Performance for the Advanced Photon Source Linear Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH093, pp. 987-989.
- J. Rahighi et al., “ILSF, A Third Generation Light Source Laboratory in Iran”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOAB202, pp. 1137-1139.
- R. Dortwegt, S. Pasky, and M. White, “Improved Temperature Regulation of APS Linac RF Components”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4103, pp. 1001-1003.
- N. Wang and Q. Qin, “Transverse Impedance Calculation for Simplified Model of Ferrite Kicker Magnet with Beta < 1”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS059, pp. 742-744.
- T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 389-392.
- T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
- M. Stetter et al., “Investigations on a Plasma Lens for Fine Focusing of Heavy-Ion Beams”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 285-288.
- F. Valentini, T. Hakulinen, L. Hammouti, T. Ladzinski, and P. Ninin, “Formal Methodology for Safety-Critical Systems Engineering at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA04, pp. 918-921.
- M. Martens, G. Annala, and P. Bauer, “Tune and Coupling Drift Compensation during the Tevatron Injection Porch”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB031, pp. 3359-3361.
- A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 593-596.
- V. A. Anferov et al., “Siberian Snake Experiments at the IUCF Cooler Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDR1, pp. 392-394.
- T. Ladzinski et al., “Access Safety Systems ÔÇô New Concepts from the LHC Experience”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU008, pp. 1066-1069.
- K. Eppley et al., “Results of Simulations of High-Power Klystrons”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2903-2906.
Back to search