Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. L. Neubauer, M. Borland, A. Dudas, R. Nassiri, and R. Sah, “Adjustable High Power Coax RF Coupler with No Moving Parts”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB059, pp. 4008-4010.
[n] R. Pengo et al., “A Heavy Ion Superconducting Linear Post-Accelerator Called ALPI”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 43-46.
[n] H. Jenhani and P. Carbonnier, “Experimental Validation of the Use of Cold Cathode Gauge inside the Cryomodule Insulation Vacuum”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 848. doi:10.18429/JACoW-SRF2021-THPTEV011
[n] J. H. Shao et al., “Generation of High Power Short Rf Pulses using an X-Band Metallic Power Extractor Driven by High Charge Multi-Bunch Train”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 734-737. doi:10.18429/JACoW-IPAC2019-MOPRB069
[n] B. J. Munroe, R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Design of Photonic Bandgap (PBG) Accelerator Structures with Reduced Symmetry”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP082, pp. 2989-2991.
[n] M. P. Dunning et al., “Coherent Terahertz Radiation Emitted by Sub-Picosecond Electron Bunches in a Magnetic Chicane”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP049, pp. 1391-1393.
[n] A. Facco et al., “Status of RF Superconductivity at Laboratori Nazionali di Legnaro”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91B02, pp. XX-XX.
[n] A. M. Mash'al, E. Ahmadi, F. D. Dabbagh Kashani, S. Dastan, and J. Rahighi, “Beta Beating and Coupling Correction of the ILSF Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 946-948. doi:10.18429/JACoW-IPAC2019-MOPTS040
[n] J. Dreikorn, U. Rohrmann, and M. Weickhmann, “Permanent magnet materials for green accelerator facilities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3886-3889. doi:10.18429/JACoW-IPAC2023-WEPM133
[n] A. M. Porcellato, A. Battistella, and S. Marigo, “Automation of the Cavity Parameter Measurements”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1109-1112.
[n] K. Shu and J. X. Zhang, “The Design of a New State Space Digital Power Supply Prototype”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3546-3548. doi:10.18429/JACoW-IPAC2016-THPMW007
[n] A. Zlobin and M. Baldini, “Conceptual designs of a 20 T dipole based on hybrid HTS/LTS cos-theta coils”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS70, unpublished.
[n] R. Denz, K. Dahlerup-Petersen, and K. H. Mess, “Electronic Systems for the Protection of Superconducting Devices in the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD010, pp. 2422-2424.
[n] M. Apollonio and M. A. Rayner, “Optimization of the MICE Muon Beam Line”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE052, pp. 3461-3463.
[n] B. Farnham, F. Varela, and N. Ziogas, “A Homogenous Approach to CERN/vendor Collaboration Projects for Building OPC-UA Servers”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1352-1355. doi:10.18429/JACoW-ICALEPCS2017-THPHA009
[n] Y. Shimosaki and K. Takayama, “Nonlinear-Resonance Analysis of Halo-Formation excited by Beam-Core Oscillation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B06, pp. 1330-1332.
[n] J. X. Zhang, T. A. Antaya, and R. E. Block, “Beam Dynamics of a Compact SC Isochronous Cyclotron - Preliminary Study of Central Region”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS021, pp. 643-645.
[n] G. Bassato, A. Battistella, M. Bellato, and S. Canella, “The Control System of the LNL Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1145-1148.
For LaTeX
Use Complete Form
For BibTeX
References
- M. L. Neubauer, M. Borland, A. Dudas, R. Nassiri, and R. Sah, “Adjustable High Power Coax RF Coupler with No Moving Parts”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB059, pp. 4008-4010.
- R. Pengo et al., “A Heavy Ion Superconducting Linear Post-Accelerator Called ALPI”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 43-46.
- H. Jenhani and P. Carbonnier, “Experimental Validation of the Use of Cold Cathode Gauge inside the Cryomodule Insulation Vacuum”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 848.
- J. H. Shao et al., “Generation of High Power Short Rf Pulses using an X-Band Metallic Power Extractor Driven by High Charge Multi-Bunch Train”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 734-737.
- B. J. Munroe, R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Design of Photonic Bandgap (PBG) Accelerator Structures with Reduced Symmetry”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP082, pp. 2989-2991.
- M. P. Dunning et al., “Coherent Terahertz Radiation Emitted by Sub-Picosecond Electron Bunches in a Magnetic Chicane”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP049, pp. 1391-1393.
- A. Facco et al., “Status of RF Superconductivity at Laboratori Nazionali di Legnaro”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91B02, pp. XX-XX.
- A. M. Mash'al, E. Ahmadi, F. D. Dabbagh Kashani, S. Dastan, and J. Rahighi, “Beta Beating and Coupling Correction of the ILSF Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 946-948.
- J. Dreikorn, U. Rohrmann, and M. Weickhmann, “Permanent magnet materials for green accelerator facilities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM133, pp. 3886-3889.
- A. M. Porcellato, A. Battistella, and S. Marigo, “Automation of the Cavity Parameter Measurements”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1109-1112.
- K. Shu and J. X. Zhang, “The Design of a New State Space Digital Power Supply Prototype”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3546-3548.
- A. Zlobin and M. Baldini, “Conceptual designs of a 20 T dipole based on hybrid HTS/LTS cos-theta coils”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS70, unpublished.
- R. Denz, K. Dahlerup-Petersen, and K. H. Mess, “Electronic Systems for the Protection of Superconducting Devices in the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD010, pp. 2422-2424.
- M. Apollonio and M. A. Rayner, “Optimization of the MICE Muon Beam Line”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE052, pp. 3461-3463.
- B. Farnham, F. Varela, and N. Ziogas, “A Homogenous Approach to CERN/vendor Collaboration Projects for Building OPC-UA Servers”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1352-1355.
- Y. Shimosaki and K. Takayama, “Nonlinear-Resonance Analysis of Halo-Formation excited by Beam-Core Oscillation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B06, pp. 1330-1332.
- J. X. Zhang, T. A. Antaya, and R. E. Block, “Beam Dynamics of a Compact SC Isochronous Cyclotron - Preliminary Study of Central Region”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS021, pp. 643-645.
- G. Bassato, A. Battistella, M. Bellato, and S. Canella, “The Control System of the LNL Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1145-1148.
Back to search