Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Beebe-Wang, A. Deshpande, C. Montag, D. J. Rondeau, and B. Surrow, “Synchrotron Radiation in eRHIC Interaction Region”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP042, pp. 2729-2731.
[n] C. Zhang et al., “The Multipacting Simulation for the New-Shaped QWR using TRACK3P”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB019, pp. 50-52.
[n] M. X. Xu et al., “The Superconducting CH Cavity Development in IMP”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB028, pp. 74-76.
[n] A. Hershcovitch et al., “Novel Technique Ion Assisted In-Situ Coating of Long, Small Diameter, Accelerator Beam Pipes with Compacted Thick Crystalline Copper Film”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4301-4303. doi:10.18429/JACoW-IPAC2019-THPTS080
[n] M. Pivi, G. Dugan, M. Palmer, and K. Sonnad, “Simulation of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper FTR02, pp. 203-207.
[n] Y. Z. Lin, “Three Types of Linacs for Customs Large Container Inspection Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH319, pp. 2808-2810.
[n] R. C. Lee, R. H. Olsen, and K. L. Unger, “Trials, Tribulations, and Pitfalls Using Commercial Instruments for Data Acquisition”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP083, pp. 561-563.
[n] R. Avery et al., “The Era 4 MeV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 479-484.
[n] I. V. Gonin et al., “New Helium Vessel and Lever Tuner Designs for the 650 MHz Cavities for Project X”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC25, pp. 841-843.
[n] N. Malitsky, I. Pinayev, R. M. Talman, and C. Xiaomeng, “Application of Model Independent Analysis with EPICS-DDS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA083, pp. 2675-2676.
[n] A. Brinkmann and J. Ziegler, “Dry-Ice Cleaning of RF-Structures at DESY”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 52-55. doi:10.18429/JACoW-LINAC2016-MOOP05
[n] M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
[n] D. Mihalcea, C. L. Bohn, U. Happek, and P. Piot, “Longitudinal Electron Bunch Diagnostics Using Coherent Transition Radiation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT091, pp. 4254-4256.
[n] N. Wang, N. Huang, Q. Qin, and S. Wang, “The Design of Beam Collimation System for CSNS/RCS”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2A04, pp. 572-575.
[n] Z. G. Yin, X. L. Fu, X. T. Lu, T. J. Zhang, and X. E. Mu, “An Embedded IOC for 100 MeV Cyclotron RF Control”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 626. doi:10.18429/JACoW-ICALEPCS2019-MOPHA165
[n] A. P. Strokach et al., “CC-18/9M Cyclotron System”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA11, pp. 149-151.
[n] L. L. Guan et al., “Magnetic Field Measurement and Shimming for a Medical Compact Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 48-50. doi:10.18429/JACoW-CYCLOTRONS2019-MOP011
[n] M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502.
[n] W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
[n] R. Carrigan et al., “Main Accelerator Abort System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 240-243.
[n] M. A. Trump, D. R. Machen, M. A. Paciotti, E. J. Schneider, and D. A. Swenson, “Bead Perturbation Measurement”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-8, pp. 1151-1155.
[n] W. Chou, A. Drozhdin, P. Lucas, and J.-F. Ostiguy, “Fermilab Booster Modeling and Space Charge Study”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG017, pp. 2925-2927.
[n] R. L. Kustom, S. A. Martin, P. F. Meads, G. Wuestefeld, and E. Zaplatin, “The FFAG as an Accelerator for High Intensity Proton Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 574-577.
[n] A. I. Muminov, I. N. Konovalov, B. G. Kurganov, and A. U. Usmonov, “A Semi-Automatic System for Radioisotope Production”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-11, pp. 568-570.
[n] T. P. Hughes, M. M. Campbell, and B. B. Godfrey, “Analytic and Numerical Studies of the Modified Betatron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2528-2531.
[n] J. C. Sheppard, C. A. Blocker, J. E. Clendenin, R. H. Helm, M. J. Lee, and R. H. Miller, “Emittance Calculations for the Stanford Linear Collider Injector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2161-2164.
[n] G. Liu et al., “The Upgrade of HLS Linac Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE014, pp. 2357-2359.
[n] P. A. McIntosh, R. Akre, J. Brooks, P. Emma, and E. Rago, “Realization of an X-Band RF System for LCLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT044, pp. 2801-2803.
[n] V. A. Anferov, M. Ball, D. L. Friesel, and W. P. Jones, “Dispersion Suppression in the MPRI Achromat Beam Line”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH020, pp. 2488-2490.
[n] M. Fouaidy, N. Hammoudi, M. S. Saki, H. Saugnac, and L. Simonet, “Electromechanical Characterization of Piezoelectric Actuators Subjected to a Variable Preloading Force at Cryogenic Temperature”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH143, pp. 387-389.
[n] K. Fuchsberger et al., “Operational Experience during Initial Beam Commissioning of the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC003, pp. 456-458.
[n] Y. W. Kang, P. J. Matthews, and R. L. Kustom, “A Constant Gradient Planar Accelerating Structure for Linac Use”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG10, pp. 643-645.
[n] L. M. Cremaldi and D. A. Sanders, “MICE Particle Identification Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP065, pp. 1696-1698.
[n] J. S. Brandt et al., “Coil End Design for the SSC Collider Dipole Magnet”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2182-2185.
[n] J. Popielarski, C. Compton, A. Facco, W. Hartung, L. Popielarski, and J. Wlodarczak, “Dewar Testing of = 0.085 Quarter Wave Resonators at MSU”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO060, pp. 537-541.
[n] E. L. Hubbard, W. C. Martin, G. Michelassi, R. E. Peters, and M. F. Shea, “System for Transport and Analysis of 200 MeV Linac Beam”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-3, pp. 1095-1105.
[n] K. W. Struve et al., “Status of Beam Transport with the ETA and ATA Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0042, pp. 446-448.
[n] P. A. McIntosh, M. W. Poole, G. Saxon, and M. de Wijs, “Beam Energy Replacement in a Compact FEL”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP028G, pp. 727-729.
[n] C. Liu, G. A. Krafft, and R. M. Talman, “Optimal Focusing for a Linac-Based Hard X-ray Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP057, pp. 2229-2231.
[n] A. Rowe, D. Assell, L. Elementi, T. Hamerla, S. Reeves, and T. Thode, “BCP system for the ANL-FNAL SCPF”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP47, pp. XX-XX.
[n] J. Bridges, Y. W. Kang, R. L. Kustom, and K. Primdahl, “High Power Testing of the Prototype Accelerating Cavity (352 MHz) for the Advanced Photon Source (APS)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1254-1257.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Beebe-Wang, A. Deshpande, C. Montag, D. J. Rondeau, and B. Surrow, “Synchrotron Radiation in eRHIC Interaction Region”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP042, pp. 2729-2731.
- C. Zhang et al., “The Multipacting Simulation for the New-Shaped QWR using TRACK3P”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB019, pp. 50-52.
- M. X. Xu et al., “The Superconducting CH Cavity Development in IMP”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB028, pp. 74-76.
- A. Hershcovitch et al., “Novel Technique Ion Assisted In-Situ Coating of Long, Small Diameter, Accelerator Beam Pipes with Compacted Thick Crystalline Copper Film”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4301-4303.
- M. Pivi, G. Dugan, M. Palmer, and K. Sonnad, “Simulation of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper FTR02, pp. 203-207.
- Y. Z. Lin, “Three Types of Linacs for Customs Large Container Inspection Application”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH319, pp. 2808-2810.
- R. C. Lee, R. H. Olsen, and K. L. Unger, “Trials, Tribulations, and Pitfalls Using Commercial Instruments for Data Acquisition”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP083, pp. 561-563.
- R. Avery et al., “The Era 4 MeV Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 479-484.
- I. V. Gonin et al., “New Helium Vessel and Lever Tuner Designs for the 650 MHz Cavities for Project X”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC25, pp. 841-843.
- N. Malitsky, I. Pinayev, R. M. Talman, and C. Xiaomeng, “Application of Model Independent Analysis with EPICS-DDS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA083, pp. 2675-2676.
- A. Brinkmann and J. Ziegler, “Dry-Ice Cleaning of RF-Structures at DESY”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 52-55.
- M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
- D. Mihalcea, C. L. Bohn, U. Happek, and P. Piot, “Longitudinal Electron Bunch Diagnostics Using Coherent Transition Radiation”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT091, pp. 4254-4256.
- N. Wang, N. Huang, Q. Qin, and S. Wang, “The Design of Beam Collimation System for CSNS/RCS”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2A04, pp. 572-575.
- Z. G. Yin, X. L. Fu, X. T. Lu, T. J. Zhang, and X. E. Mu, “An Embedded IOC for 100 MeV Cyclotron RF Control”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 626.
- A. P. Strokach et al., “CC-18/9M Cyclotron System”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA11, pp. 149-151.
- L. L. Guan et al., “Magnetic Field Measurement and Shimming for a Medical Compact Cyclotron”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 48-50.
- M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502.
- W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
- R. Carrigan et al., “Main Accelerator Abort System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 240-243.
- M. A. Trump, D. R. Machen, M. A. Paciotti, E. J. Schneider, and D. A. Swenson, “Bead Perturbation Measurement”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper K-8, pp. 1151-1155.
- W. Chou, A. Drozhdin, P. Lucas, and J.-F. Ostiguy, “Fermilab Booster Modeling and Space Charge Study”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG017, pp. 2925-2927.
- R. L. Kustom, S. A. Martin, P. F. Meads, G. Wuestefeld, and E. Zaplatin, “The FFAG as an Accelerator for High Intensity Proton Beams”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 574-577.
- A. I. Muminov, I. N. Konovalov, B. G. Kurganov, and A. U. Usmonov, “A Semi-Automatic System for Radioisotope Production”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-11, pp. 568-570.
- T. P. Hughes, M. M. Campbell, and B. B. Godfrey, “Analytic and Numerical Studies of the Modified Betatron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2528-2531.
- J. C. Sheppard, C. A. Blocker, J. E. Clendenin, R. H. Helm, M. J. Lee, and R. H. Miller, “Emittance Calculations for the Stanford Linear Collider Injector”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2161-2164.
- G. Liu et al., “The Upgrade of HLS Linac Control System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE014, pp. 2357-2359.
- P. A. McIntosh, R. Akre, J. Brooks, P. Emma, and E. Rago, “Realization of an X-Band RF System for LCLS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT044, pp. 2801-2803.
- V. A. Anferov, M. Ball, D. L. Friesel, and W. P. Jones, “Dispersion Suppression in the MPRI Achromat Beam Line”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH020, pp. 2488-2490.
- M. Fouaidy, N. Hammoudi, M. S. Saki, H. Saugnac, and L. Simonet, “Electromechanical Characterization of Piezoelectric Actuators Subjected to a Variable Preloading Force at Cryogenic Temperature”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH143, pp. 387-389.
- K. Fuchsberger et al., “Operational Experience during Initial Beam Commissioning of the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC003, pp. 456-458.
- Y. W. Kang, P. J. Matthews, and R. L. Kustom, “A Constant Gradient Planar Accelerating Structure for Linac Use”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG10, pp. 643-645.
- L. M. Cremaldi and D. A. Sanders, “MICE Particle Identification Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP065, pp. 1696-1698.
- J. S. Brandt et al., “Coil End Design for the SSC Collider Dipole Magnet”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2182-2185.
- J. Popielarski, C. Compton, A. Facco, W. Hartung, L. Popielarski, and J. Wlodarczak, “Dewar Testing of = 0.085 Quarter Wave Resonators at MSU”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO060, pp. 537-541.
- E. L. Hubbard, W. C. Martin, G. Michelassi, R. E. Peters, and M. F. Shea, “System for Transport and Analysis of 200 MeV Linac Beam”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper K-3, pp. 1095-1105.
- K. W. Struve et al., “Status of Beam Transport with the ETA and ATA Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0042, pp. 446-448.
- P. A. McIntosh, M. W. Poole, G. Saxon, and M. de Wijs, “Beam Energy Replacement in a Compact FEL”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP028G, pp. 727-729.
- C. Liu, G. A. Krafft, and R. M. Talman, “Optimal Focusing for a Linac-Based Hard X-ray Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP057, pp. 2229-2231.
- A. Rowe, D. Assell, L. Elementi, T. Hamerla, S. Reeves, and T. Thode, “BCP system for the ANL-FNAL SCPF”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP47, pp. XX-XX.
- J. Bridges, Y. W. Kang, R. L. Kustom, and K. Primdahl, “High Power Testing of the Prototype Accelerating Cavity (352 MHz) for the Advanced Photon Source (APS)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1254-1257.
Back to search