Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Nguyen Xuan and V. Baggiolini, “A Testbed for Validating the LHC Controls System Core Before Deployment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS003, pp. 977-980.
[n] R. Avery et al., “The Era 4 MeV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 479-484.
[n] M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
[n] H. L. Rutkowski et al., “The Berkeley 2MV Heavy Ion Fusion Injector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 959-962.
[n] G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 846-848. doi:10.18429/JACoW-ICALEPCS2017-TUPHA179
[n] B. Autin et al., “CERN 400 GeV Proton Storage Rings with Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1187-1191.
[n] W. Sliwinski, P. Charrue, and I. Yastrebov, “Status of the RBAC Infrastructure and Lessons Learnt from its Deployment in LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU009, pp. 702-705.
[n] S. Sampayan, G. Caporaso, B. Carder, M. Norton, D. Trimble, and J. Elizondo, “Optically Induced Surface Flashover Switching for the Dielectric Wall Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA20, pp. 2123-2125.
[n] R. S. Moore, “Review of Recent Tevatron Operations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOCKI01, pp. 719-721.
[n] E. G. Parozzi et al., “Future Neutrino Beam Studies Under the Framework of Physics Beyond Colliders”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2044-2047. doi:10.18429/JACoW-IPAC2022-WEPOTK008
[n] I. Bazarov and G. H. Hoffstaetter, “Lattice Options for a 5 GeV Light Source at Cornell”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB009, pp. 842-844.
[n] P. Gudewicz and E. Petit, “Capacitive Beam Position Monitors and Automatic Beam Centering in the Transfer Lines of GANIL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1142-1145.
[n] L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
[n] Y. Kim et al., “Bunch Length Beating in PLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH124, pp. 1957-1959.
[n] P. Sp?ñdtke, “Computer Simulation of High-Current DC Ion Beams”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0012, pp. 356-358.
[n] H. R. Schneider et al., “A Compact H- Cyclotron for Isotope Production”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1502-1505.
[n] M-H. Moscatello, “Preliminary Design of a New Central Region for the LNS Superconducting Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXC-03, pp. 454-456.
[n] M. Szczepaniak, A. Wawrzyniak, D. Teytelman, K. Dudek, R. Panas, and W. Wiatrowska, “Implementation and Initial Operation of the Bunch-by-Bunch Feedback System at SOLARIS”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 424-428. doi:10.18429/JACoW-IBIC2025-TUPCO28
[n] P. K. Roy et al., “Non-Intercepting Diagnostic for the HIF Neutralized Transport Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG016, pp. 2625-2627.
[n] X. Singer, A. Ermakov, A. Matheisen, A. Schmidt, and W. Singer, “Structure of the Electron Beam Welding Connections”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO074, pp. 412-412.
[n] H. R. Schneider et al., “A 30 MeV H- Cyclotron for Isotope Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1623-1626.
[n] L. Schrettner, B. Bag?â, B. Erdohelyi, T. M. Gaizer, A. Heidrich, and G. Nyiri, “Configuration Management for the Integrated Control System Software of ELI-ALPS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1162-1167. doi:10.18429/JACoW-ICALEPCS2017-THBPA06
[n] P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
[n] Y. Kim et al., “RF Noise Driven Dipole Mode Parametric Resonance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH123, pp. 1954-1956.
[n] B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
[n] B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47.
[n] F. Loyer, “Status Report on the GANIL Renovation Program”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-10, pp. 74-77.
[n] D. Werder et al., “EPICS Data Streaming and HDF File Writing for ESS Benchmarked Using the Virtual AMOR Instrument”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1815-1819. doi:10.18429/JACoW-ICALEPCS2017-THPHA167
[n] P. Burrows et al., “The FONT4 ILC Intra-train Beam-based Digital Feedback System Prototype”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN108, pp. 416-418.
[n] H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
[n] J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
[n] L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 789-793. doi:10.18429/JACoW-ICALEPCS2017-TUPHA163
[n] V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
[n] R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2514-2517. doi:10.18429/JACoW-IPAC2019-WEPGW021
[n] J. T. M. Lyles et al., “System Considerations for 201.25 MHz RF System for LANSCE”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO14, pp. 963-965.
[n] P. Gladkikh, A. Dovbnya, Yu. Tur, V. Shendrik, and A. Shcherbakov, “Electron Beam Monochromatization in the Linac used as an Injector to the Stretcher”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-27, pp. 595-597.
[n] D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 477-479. doi:10.18429/JACoW-RUPAC2018-THPSC35
[n] C. M. Astefanous, J. P. Deacutis, D. Holmes, T. Schultheiss, I. Ben-Zvi, and W. Xu, “Design and Analysis of SRF Cavities for Pressure Vessel Code Compliance”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP269, pp. 1322-1324.
[n] I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3046-3047. doi:10.18429/JACoW-IPAC2015-WEPMN052
[n] F. Dupont and B. Gremont, “The 20 MeV Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F02, pp. XX-XX.
[n] J. Jacob et al., “Test of the SOLEIL Cryomodule Prototype with Beam at ESRF”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP22, pp. 82-85.
[n] L. Ahle et al., “Recent Progress in the Development of a Circular Ion Induction Accelerator for Space Charge Dominated Beams at LLNL”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4027, pp. 109-111.
[n] V. Anguelov, I. Issinsky, A. Kondratenko, A. Kovalenko, and V. Mikhailov, “Polarized Deuterons at the Nuclotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP13, pp. 2289-2291.
[n] C. M. Bhat and J. P. Marriner, “Longitudinal Emittance Measurements in the Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB006, pp. 514-518.
[n] G. Di Massa and M. R. Masullo, “Beam Impedance Measurement Using a Synthetic Pulse Technique”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1052-1055.
[n] J. S. Swieszek, A. Gallifa Terricabras, M. Garlasché, and D. Smakulska, “Novel Approaches in Characterization and Modelling of Fabrication Processes for SRF Components”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 490-495. doi:10.18429/JACoW-SRF2023-TUPTB038
[n] P. Lebasque, R. Ben El Fekih, M. Bol, J.-P. Lavieville, A. Loulergue, and D. Muller, “Improvement on Pulsed Magnetic Systems at SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC081, pp. 2183-2185.
[n] D. Harryman et al., “Investigation of readout methods for electro-optical beam position monitor pickups”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 788-792. doi:10.18429/JACoW-IBIC2025-WEPMO26
[n] F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 579-582.
[n] J. Resta-L??pez and P. Burrows, “Design and Performance of Intra-Train Feedback Systems at ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP075, pp. 4129-4131.
[n] Y. K. Batygin, A. Scheinker, and C. Li, “Nonlinear Optics for Suppression of Halo Formation in Space Charge Dominated Beams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 953-955. doi:10.18429/JACoW-IPAC2014-TUOAB03
[n] J.-M. Filhol et al., “Operation and Performance Upgrade of the SOLEIL Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP021, pp. 2312-2314.
[n] C. W. Potts and D. F. Marcks, “Self-Optimizing Target Control System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 642-648.
[n] J. Arianer, “New Developments in Heavy-Ion Sources (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-02, pp. 341-348.
[n] W. Smith and E. Bjorklund, “A CAMAC-Based Knob Controller for the LAMPF Control System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 544-547.
[n] Z. T. Zhao et al., “Design Study for the SDUV-FEL Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20007, pp. XX-XX.
[n] A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
[n] C. W. Potts and F. R. Brumwell, “The Zero Gradient Synchrotron Closed Orbit Position Monitoring System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 918-920.
[n] P. Efthimion, R. C. Davidson, E. Gilson, L. Grisham, B. G. Logan, and S. S. Yu, “RF Plasma Source for Heavy Ion Beam Charge Neutralization”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG030, pp. 2661-2663.
[n] M. Hosaka et al., “Narrow Band Coherent Edge Radiation at UVSOR-III”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1613-1615. doi:10.18429/JACoW-IPAC2015-TUPJE004
[n] V. Andreev et al., “Nuclotron Beam Diagnostics”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA173, pp. 2256-2258.
[n] K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
[n] H. Okamoto, D. Moehl, and A. Sessler, “Three-dimensional Laser Cooling”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1205-1208.
[n] V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
[n] F. Loyer, “On Line Beam Diagnostics at GANIL”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I5-03, pp. 449-452.
[n] C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731.
[n] A. Arteche et al., “Characterisation of Electro-Optic Pickups for High Bandwidth Diagnostics at the High Luminosity LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2690-2693. doi:10.18429/JACoW-IPAC2019-WEPGW088
[n] C. Rossi et al., “The Low Level RF System of ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1942-1945.
[n] K. Beckert et al., “Fast Stochastic Cooling of Heavy Ions at the ESR Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A09, pp. 1262-1264.
[n] H. Ghasem and G.-H. Luo, “Short X-ray Pulse Generation in Taiwan Photon Source Using Deflecting Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC017, pp. 2025-2027.
[n] S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
[n] J. Nguyen Xuan, B. Copy, and M. Donszelmann, “A C/C++ Build System Based on Maven for the LHC Controls System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS026, pp. 848-851.
[n] W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
[n] E. Plouviez and F. Loyer, “ESRF Synchrotron Injector Tune Measurement System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1046-1049.
[n] M. Veronese, M. B. Danailov, and M. Ferianis, “The Electro-Optic Sampling Stations for FERMI@Elettra, A Design Study”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF026, pp. 158-161.
[n] Y. K. Batygin and A. Scheinker, “Suppression of Halo Formation in FODO Focusing Channel with Nonlinear Focusing”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA064, pp. 1850-1852.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Nguyen Xuan and V. Baggiolini, “A Testbed for Validating the LHC Controls System Core Before Deployment”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS003, pp. 977-980.
- R. Avery et al., “The Era 4 MeV Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 479-484.
- M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
- H. L. Rutkowski et al., “The Berkeley 2MV Heavy Ion Fusion Injector”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 959-962.
- G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 846-848.
- B. Autin et al., “CERN 400 GeV Proton Storage Rings with Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1187-1191.
- W. Sliwinski, P. Charrue, and I. Yastrebov, “Status of the RBAC Infrastructure and Lessons Learnt from its Deployment in LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU009, pp. 702-705.
- S. Sampayan, G. Caporaso, B. Carder, M. Norton, D. Trimble, and J. Elizondo, “Optically Induced Surface Flashover Switching for the Dielectric Wall Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA20, pp. 2123-2125.
- R. S. Moore, “Review of Recent Tevatron Operations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOCKI01, pp. 719-721.
- E. G. Parozzi et al., “Future Neutrino Beam Studies Under the Framework of Physics Beyond Colliders”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2044-2047.
- I. Bazarov and G. H. Hoffstaetter, “Lattice Options for a 5 GeV Light Source at Cornell”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB009, pp. 842-844.
- P. Gudewicz and E. Petit, “Capacitive Beam Position Monitors and Automatic Beam Centering in the Transfer Lines of GANIL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1142-1145.
- L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
- Y. Kim et al., “Bunch Length Beating in PLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH124, pp. 1957-1959.
- P. Sp?ñdtke, “Computer Simulation of High-Current DC Ion Beams”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0012, pp. 356-358.
- H. R. Schneider et al., “A Compact H- Cyclotron for Isotope Production”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1502-1505.
- M-H. Moscatello, “Preliminary Design of a New Central Region for the LNS Superconducting Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXC-03, pp. 454-456.
- M. Szczepaniak, A. Wawrzyniak, D. Teytelman, K. Dudek, R. Panas, and W. Wiatrowska, “Implementation and Initial Operation of the Bunch-by-Bunch Feedback System at SOLARIS”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 424-428.
- P. K. Roy et al., “Non-Intercepting Diagnostic for the HIF Neutralized Transport Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG016, pp. 2625-2627.
- X. Singer, A. Ermakov, A. Matheisen, A. Schmidt, and W. Singer, “Structure of the Electron Beam Welding Connections”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO074, pp. 412-412.
- H. R. Schneider et al., “A 30 MeV H- Cyclotron for Isotope Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1623-1626.
- L. Schrettner, B. Bag?â, B. Erdohelyi, T. M. Gaizer, A. Heidrich, and G. Nyiri, “Configuration Management for the Integrated Control System Software of ELI-ALPS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1162-1167.
- P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
- Y. Kim et al., “RF Noise Driven Dipole Mode Parametric Resonance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH123, pp. 1954-1956.
- B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
- B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47.
- F. Loyer, “Status Report on the GANIL Renovation Program”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-10, pp. 74-77.
- D. Werder et al., “EPICS Data Streaming and HDF File Writing for ESS Benchmarked Using the Virtual AMOR Instrument”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1815-1819.
- P. Burrows et al., “The FONT4 ILC Intra-train Beam-based Digital Feedback System Prototype”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN108, pp. 416-418.
- H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
- J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
- L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 789-793.
- V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
- R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2514-2517.
- J. T. M. Lyles et al., “System Considerations for 201.25 MHz RF System for LANSCE”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO14, pp. 963-965.
- P. Gladkikh, A. Dovbnya, Yu. Tur, V. Shendrik, and A. Shcherbakov, “Electron Beam Monochromatization in the Linac used as an Injector to the Stretcher”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-27, pp. 595-597.
- D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 477-479.
- C. M. Astefanous, J. P. Deacutis, D. Holmes, T. Schultheiss, I. Ben-Zvi, and W. Xu, “Design and Analysis of SRF Cavities for Pressure Vessel Code Compliance”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP269, pp. 1322-1324.
- I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3046-3047.
- F. Dupont and B. Gremont, “The 20 MeV Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F02, pp. XX-XX.
- J. Jacob et al., “Test of the SOLEIL Cryomodule Prototype with Beam at ESRF”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP22, pp. 82-85.
- L. Ahle et al., “Recent Progress in the Development of a Circular Ion Induction Accelerator for Space Charge Dominated Beams at LLNL”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4027, pp. 109-111.
- V. Anguelov, I. Issinsky, A. Kondratenko, A. Kovalenko, and V. Mikhailov, “Polarized Deuterons at the Nuclotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP13, pp. 2289-2291.
- C. M. Bhat and J. P. Marriner, “Longitudinal Emittance Measurements in the Fermilab Recycler Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB006, pp. 514-518.
- G. Di Massa and M. R. Masullo, “Beam Impedance Measurement Using a Synthetic Pulse Technique”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1052-1055.
- J. S. Swieszek, A. Gallifa Terricabras, M. Garlasché, and D. Smakulska, “Novel Approaches in Characterization and Modelling of Fabrication Processes for SRF Components”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB038, pp. 490-495.
- P. Lebasque, R. Ben El Fekih, M. Bol, J.-P. Lavieville, A. Loulergue, and D. Muller, “Improvement on Pulsed Magnetic Systems at SOLEIL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC081, pp. 2183-2185.
- D. Harryman et al., “Investigation of readout methods for electro-optical beam position monitor pickups”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 788-792.
- F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 579-582.
- J. Resta-L??pez and P. Burrows, “Design and Performance of Intra-Train Feedback Systems at ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP075, pp. 4129-4131.
- Y. K. Batygin, A. Scheinker, and C. Li, “Nonlinear Optics for Suppression of Halo Formation in Space Charge Dominated Beams”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 953-955.
- J.-M. Filhol et al., “Operation and Performance Upgrade of the SOLEIL Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP021, pp. 2312-2314.
- C. W. Potts and D. F. Marcks, “Self-Optimizing Target Control System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 642-648.
- J. Arianer, “New Developments in Heavy-Ion Sources (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-02, pp. 341-348.
- W. Smith and E. Bjorklund, “A CAMAC-Based Knob Controller for the LAMPF Control System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 544-547.
- Z. T. Zhao et al., “Design Study for the SDUV-FEL Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20007, pp. XX-XX.
- A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
- C. W. Potts and F. R. Brumwell, “The Zero Gradient Synchrotron Closed Orbit Position Monitoring System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 918-920.
- P. Efthimion, R. C. Davidson, E. Gilson, L. Grisham, B. G. Logan, and S. S. Yu, “RF Plasma Source for Heavy Ion Beam Charge Neutralization”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG030, pp. 2661-2663.
- M. Hosaka et al., “Narrow Band Coherent Edge Radiation at UVSOR-III”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1613-1615.
- V. Andreev et al., “Nuclotron Beam Diagnostics”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA173, pp. 2256-2258.
- K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
- H. Okamoto, D. Moehl, and A. Sessler, “Three-dimensional Laser Cooling”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1205-1208.
- V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839.
- F. Loyer, “On Line Beam Diagnostics at GANIL”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I5-03, pp. 449-452.
- C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3728-3731.
- A. Arteche et al., “Characterisation of Electro-Optic Pickups for High Bandwidth Diagnostics at the High Luminosity LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2690-2693.
- C. Rossi et al., “The Low Level RF System of ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1942-1945.
- K. Beckert et al., “Fast Stochastic Cooling of Heavy Ions at the ESR Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A09, pp. 1262-1264.
- H. Ghasem and G.-H. Luo, “Short X-ray Pulse Generation in Taiwan Photon Source Using Deflecting Cavity”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC017, pp. 2025-2027.
- S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
- J. Nguyen Xuan, B. Copy, and M. Donszelmann, “A C/C++ Build System Based on Maven for the LHC Controls System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS026, pp. 848-851.
- W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
- E. Plouviez and F. Loyer, “ESRF Synchrotron Injector Tune Measurement System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1046-1049.
- M. Veronese, M. B. Danailov, and M. Ferianis, “The Electro-Optic Sampling Stations for FERMI@Elettra, A Design Study”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF026, pp. 158-161.
- Y. K. Batygin and A. Scheinker, “Suppression of Halo Formation in FODO Focusing Channel with Nonlinear Focusing”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA064, pp. 1850-1852.
Back to search