Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Reszela, G. Cuni, C. M. Falc??n Torres, D. Fernandez-Carreiras, C. Pascual-Izarra, and M. Rosanes Siscart, “Iterative Development of the Generic Continuous Scans in Sardana”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 524-528. doi:10.18429/JACoW-ICALEPCS2015-TUB3O02
[n] M. R. Rehman et al., “Progress of the Novel Three-dimensional Spiral Injection Scheme Test Experiment”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 717-720. doi:10.18429/JACoW-LINAC2018-THPO017
[n] R. F. Lambiase, B. Oerter, and J. Smith, “Power Supply Control for the Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B17, pp. 2211-2213.
[n] W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
[n] M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1036-1039.
[n] H. Bohlen et al., “Operating Results for the PEP-II 1.2 MW Klystron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP086L, pp. 2155-2160.
[n] J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
[n] T. B. Bolshakov, A. D. Petrov, and S. L. Lackey, “Synoptic Display - A Client-Server System for Graphical Data Representation”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP505, pp. XX-XX.
[n] Q. Kerns, M. Popovic, and C. Kerns, “Spark Location in RF Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR21, pp. 1838-1840.
[n] T. Bertuccio, B. Brown, G. Donica, T. Ellison, and D. L. Friesel, “High Voltage System Design for the IUCF 300 kV Electron Cooling System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3128-3131.
[n] E. Demmel, S. Luetgert, B. Offermann, and H. Schwarz, “A New High Power Klystron for the SLAC B-Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP079L, pp. 2152-2154.
[n] R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
[n] M. N. Butler, F. Jones, S. Koscielniak, and G. H. Mackenzie, “Coulomb Scattering Cross Sections for Accelerator Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 654-657.
[n] V. Poncza and A. Lehrach, “Search for Electric Dipole Moments at Cosy in J??lich - Spin-Tracking Simulations Using Bmad”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 914-917. doi:10.18429/JACoW-IPAC2019-MOPTS028
[n] M. Vall?®au et al., “Construction and Optimization of Cryogenic Undulators at SOLEIL”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 193-198. doi:10.18429/JACoW-FLS2018-THP2WD01
[n] T. H. Tak, J. S. Hong, M. K. Kim, G. I. Kwon, T. G. Lee, and W. R. Lee, “Development of Pulse Fault Sequence Analysis Application with KSTAR Data Integration System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 663-665. doi:10.18429/JACoW-ICALEPCS2017-TUPHA105
[n] S. F. Mikhailov, H. Hao, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Protection of VUV FEL Mirrors using Soft Orbit Bump at Duke FEL/HIGS facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA074, pp. 1301-1303.
[n] S. Bristol, C. Kerns, Q. Kerns, and H. W. Miller, “The Tevatron Global Radius and phis System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2141-2144.
[n] M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 878-883. doi:10.18429/JACoW-LINAC2022-FR1AA05
[n] L. T. Sun et al., “Status of FECR Ion Source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WET2AUCO03, unpublished.
[n] F. D. Dziuba et al., “RF Commissioning of the Superconducting 217 MHz CH Cavity for Heavy Ions and First Beam Operation”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 859-862. doi:10.18429/JACoW-LINAC2018-THPO073
[n] H. Takahashi, N. Hayashi, and M. Sugimoto, “Synchronized Data Distribution and Acquisition System Using Reflective Memory for J-PARC 3GeV RCS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP013, pp. 1553-1555.
[n] L. K. Mestha and K. S. Yeung, “Sliding Mode Controller for RF Cavity Tuning Loop”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 783-786.
[n] H. Kwon, K. Lee, M. Chun, K. Chung, H. Kim, and M. Park, “Single Pass Acceleration Experiment Using Coaxial Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH029, pp. 2512-2514.
[n] D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
[n] H. Saito et al., “Characteristics of Polarized Coherent Radiation in Thz Region From a Crossed-Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1769-1771. doi:10.18429/JACoW-IPAC2019-TUPRB038
[n] R. W. Allison, D. M. Evans, R. M. Richter, A. J. Sherwood, and E. Zajec, “Measurements of the Linear-Accelerator Exit Beam of the Bevatron Injector”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-02, pp. 34-47.
[n] R. M. Zwaska, W. Chou, I. Kourbanis, A. Marchionni, V. D. Shiltsev, and X. Zhang, “Electron Cloud Investigations in the Fermilab Main Injector”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAW05, pp. XX-XX.
[n] R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1374-1376. doi:10.18429/JACoW-ICALEPCS2017-THPHA018
[n] Y. Iwashita et al., “Non-destructive Inspections for SC Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB07, pp. 156-158.
[n] D. Doll et al., “Low to High Energy Beamstops for APT”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4090, pp. 615-617.
[n] R. F. Lambiase, B. Oerter, S. Peng, and J. Smith, “Power Supply Control and Monitoring for the SNS Ring and Transport System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH005, pp. 3666-3668.
[n] G. Ferioli, L. Jensen, and G. Vismara, “Protection and Diagnostic Systems for High Intensity Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358-360.
[n] J. C. Sheppard et al., “Update to the NLC Injector System Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH068, pp. 3834-3836.
[n] I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1927-1930.
[n] J. Paszkiewicz, P. Burrows, and W. Wuensch, “Spatially Resolved Dark Current in High Gradient Traveling Wave Structures”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2956-2959. doi:10.18429/JACoW-IPAC2019-WEPRB062
[n] M. Farkhondeh, K. A. Dow, W. W. Sapp, and D. R. Tieger, “Survey and Alignment of the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2938-2941.
[n] S. Baturin, A. Altmark, I. L. Sheynman, and A. Kanareykin, “Parameter Optimization of a Rectangular Dielectric Based Wakefield Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA008, pp. 260-262.
[n] A. Kanareykin et al., “Simulations and Measurements of Beam Breakup in Dielectric Wakefield Structures”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC081, pp. 1904-1906.
[n] C. Chen and W. Zhao, “The Progress of Low Energy Particle Accelerators in China”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 242-247.
[n] T. Ota, T. Iimura, T. Nagafuchi, K. Satoh, O. Takeda, and Y. Tanabe, “Transient Characteristics of a Solid Sector Bending Magnet for Use in Compact Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2238-2241.
[n] G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3625-3628.
[n] O. Takeda et al., “Design Study on an 80 MHz RFq Linac for Heavy Ions”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1334-1337.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Reszela, G. Cuni, C. M. Falc??n Torres, D. Fernandez-Carreiras, C. Pascual-Izarra, and M. Rosanes Siscart, “Iterative Development of the Generic Continuous Scans in Sardana”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 524-528.
- M. R. Rehman et al., “Progress of the Novel Three-dimensional Spiral Injection Scheme Test Experiment”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 717-720.
- R. F. Lambiase, B. Oerter, and J. Smith, “Power Supply Control for the Spallation Neutron Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B17, pp. 2211-2213.
- W. B. Herrmannsfeldt, “SLAC Alignment System”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-05, pp. 163-168.
- M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1036-1039.
- H. Bohlen et al., “Operating Results for the PEP-II 1.2 MW Klystron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP086L, pp. 2155-2160.
- J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
- T. B. Bolshakov, A. D. Petrov, and S. L. Lackey, “Synoptic Display - A Client-Server System for Graphical Data Representation”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP505, pp. XX-XX.
- Q. Kerns, M. Popovic, and C. Kerns, “Spark Location in RF Cavities”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR21, pp. 1838-1840.
- T. Bertuccio, B. Brown, G. Donica, T. Ellison, and D. L. Friesel, “High Voltage System Design for the IUCF 300 kV Electron Cooling System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3128-3131.
- E. Demmel, S. Luetgert, B. Offermann, and H. Schwarz, “A New High Power Klystron for the SLAC B-Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP079L, pp. 2152-2154.
- R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
- M. N. Butler, F. Jones, S. Koscielniak, and G. H. Mackenzie, “Coulomb Scattering Cross Sections for Accelerator Design”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 654-657.
- V. Poncza and A. Lehrach, “Search for Electric Dipole Moments at Cosy in J??lich - Spin-Tracking Simulations Using Bmad”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 914-917.
- M. Vall?®au et al., “Construction and Optimization of Cryogenic Undulators at SOLEIL”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 193-198.
- T. H. Tak, J. S. Hong, M. K. Kim, G. I. Kwon, T. G. Lee, and W. R. Lee, “Development of Pulse Fault Sequence Analysis Application with KSTAR Data Integration System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 663-665.
- S. F. Mikhailov, H. Hao, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Protection of VUV FEL Mirrors using Soft Orbit Bump at Duke FEL/HIGS facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA074, pp. 1301-1303.
- S. Bristol, C. Kerns, Q. Kerns, and H. W. Miller, “The Tevatron Global Radius and phis System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2141-2144.
- M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 878-883.
- L. T. Sun et al., “Status of FECR Ion Source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WET2AUCO03, unpublished.
- F. D. Dziuba et al., “RF Commissioning of the Superconducting 217 MHz CH Cavity for Heavy Ions and First Beam Operation”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 859-862.
- H. Takahashi, N. Hayashi, and M. Sugimoto, “Synchronized Data Distribution and Acquisition System Using Reflective Memory for J-PARC 3GeV RCS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP013, pp. 1553-1555.
- L. K. Mestha and K. S. Yeung, “Sliding Mode Controller for RF Cavity Tuning Loop”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 783-786.
- H. Kwon, K. Lee, M. Chun, K. Chung, H. Kim, and M. Park, “Single Pass Acceleration Experiment Using Coaxial Cavity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH029, pp. 2512-2514.
- D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
- H. Saito et al., “Characteristics of Polarized Coherent Radiation in Thz Region From a Crossed-Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1769-1771.
- R. W. Allison, D. M. Evans, R. M. Richter, A. J. Sherwood, and E. Zajec, “Measurements of the Linear-Accelerator Exit Beam of the Bevatron Injector”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-02, pp. 34-47.
- R. M. Zwaska, W. Chou, I. Kourbanis, A. Marchionni, V. D. Shiltsev, and X. Zhang, “Electron Cloud Investigations in the Fermilab Main Injector”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAW05, pp. XX-XX.
- R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1374-1376.
- Y. Iwashita et al., “Non-destructive Inspections for SC Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPLB07, pp. 156-158.
- D. Doll et al., “Low to High Energy Beamstops for APT”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4090, pp. 615-617.
- R. F. Lambiase, B. Oerter, S. Peng, and J. Smith, “Power Supply Control and Monitoring for the SNS Ring and Transport System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH005, pp. 3666-3668.
- G. Ferioli, L. Jensen, and G. Vismara, “Protection and Diagnostic Systems for High Intensity Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B14, pp. 358-360.
- J. C. Sheppard et al., “Update to the NLC Injector System Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH068, pp. 3834-3836.
- I. Zapryagaev et al., “Status of the X-band Pulsed Magnicon”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1927-1930.
- J. Paszkiewicz, P. Burrows, and W. Wuensch, “Spatially Resolved Dark Current in High Gradient Traveling Wave Structures”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2956-2959.
- M. Farkhondeh, K. A. Dow, W. W. Sapp, and D. R. Tieger, “Survey and Alignment of the MIT-Bates South Hall Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2938-2941.
- S. Baturin, A. Altmark, I. L. Sheynman, and A. Kanareykin, “Parameter Optimization of a Rectangular Dielectric Based Wakefield Accelerating Structure”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA008, pp. 260-262.
- A. Kanareykin et al., “Simulations and Measurements of Beam Breakup in Dielectric Wakefield Structures”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC081, pp. 1904-1906.
- C. Chen and W. Zhao, “The Progress of Low Energy Particle Accelerators in China”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 242-247.
- T. Ota, T. Iimura, T. Nagafuchi, K. Satoh, O. Takeda, and Y. Tanabe, “Transient Characteristics of a Solid Sector Bending Magnet for Use in Compact Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2238-2241.
- G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3625-3628.
- O. Takeda et al., “Design Study on an 80 MHz RFq Linac for Heavy Ions”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1334-1337.
Back to search