Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. T. Takahashi, H. Nakanishi, S. Sakanaka, and K. Umemori, “Experience of Driving Three RF Cavities by a Single Klystron in the Photon Factory Advanced Ring (PF-AR)”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16034, pp. XX-XX.
[n] M. L. Mallory, W. S. Chien, and P. S. Miller, “A Quick Change Axial Cold Cathode Heavy Ion Source”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1593-1594.
[n] P. Kuske and K. Ott, “Beam-Based Alignment at BESSY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP001L, pp. 887-889.
[n] A. Faus-Golfe and A. Verdier, “Dynamic Aperture Limitations of the LHC in Physics Conditions due to Low-Beta Insertions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP023L, pp. 902-904.
[n] J. A. Crittenden, M. A. Palmer, and J. T. Urban, “Design Considerations and Modeling Results for ILC Damping Ring Wigglers Based on the CESR-c Superconducting Wiggler”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS011, pp. 3014-3016.
[n] A. Galejs and P. Trent, “Design and Evaluation of Particle Beam Handling Systems”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 232-234.
[n] J. T. Urban, G. Dugan, and M. A. Palmer, “Optimization of CESR-c Superferric Wiggler for the International Linear Collider Damping Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS142, pp. 894-896.
[n] R. W. Connatser, “Interfaces with Operational Systems APS Upgrade Project Removal and Installation”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 43-44. doi:10.18429/JACoW-MEDSI2018-TUPH10
[n] L. Garolfi, C. Bruni, M. El Khaldi, P. Lepercq, C. Vallerand, and N. Faure, “Beam Dynamics Simulations of the Thomx Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3036-3039. doi:10.18429/JACoW-IPAC2016-WEPOY024
[n] S. Fu, J. Li, H. C. Liu, H. F. Ouyang, and X. Yin, “Linac Construction for China Spallation Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB01, pp. 807-809.
[n] M. A. Palmer, M. Ehrlichman, R. W. Helms, D. L. Rubin, D. Sagan, and J. T. Urban, “The Proposed Conversion of CESR to an ILC Damping Ring Test Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS141, pp. 891-893.
[n] S. Gerstl et al., “First Measurements of COLDDIAG: A Cold Vacuum Chamber for Diagnostics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP069, pp. 720-722.
[n] G. Loisch et al., “Optimisation of High Transformer Ratio Plasma Wakefield Acceleration at PITZ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1648-1650. doi:10.18429/JACoW-IPAC2018-TUPML047
[n] L. Bottura, A. Faus-Golfe, L. Walckiers, and R. Wolf, “Field Quality of the Main Dipole Magnets for the LHC Accelerator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP010G, pp. 2228-2230.
[n] M. Blaskiewicz and J. M. Brennan, “A Barrier Bucket Experiment for Accumulating De-bunched Beam in the AGS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP002G, pp. 2373-2375.
[n] C. R. Chang, “Design Studies of SSC Low-Energy-Beam-Transport System using Einzel Lenses”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU435, pp. 399-401.
[n] W. S. Gibbs and J. D. Gilpatrick, “Accelerators at Los Alamos Today”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOKNB01, pp. 20-20.
[n] W. S. C. Henry, “Power System Operation in the Cambridge Electron Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 517-519.
[n] J. Gao, J. Le Duff, and Y. Thiery, “Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB01, pp. 95-97.
[n] J. T. Urban and G. Dugan, “CESR-c Wiggler Studies in the Context of the International Linear Collider Damping Rings”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP025, pp. 1880-1882.
[n] H. Monard et al., “A Laser Triggered Electron Source for Pulsed Radiolysis”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA55, pp. 2012-2014.
[n] K. Ott, “Quadrupole Misalignment Determination at BESSY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP002L, pp. 890-892.
[n] J. T. Urban, L. J. Fields, and D. Sagan, “Linear Accelerator Simulations with BMAD”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP026, pp. 1937-1939.
[n] W. S. Chapman, “Phase Stability Studies for the ING Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 212-214.
[n] J. K. Park, Y.-S. Cho, H.-J. Kwon, K. T. Seol, and S. P. Yun, “Diffusion and Thermal Stability of Implanted Hydrogen in ZnO Nanorods”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1982-1984. doi:10.18429/JACoW-IPAC2016-TUPOY036
[n] K. R. Crandall, F. W. Guy, and D. A. Swenson, “Merits of the RFD Linac Structure for Proton and Light-Ion Acceleration Systems”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOO08A, pp. 307-312.
[n] C. M. Kleffner et al., “The RFQ-Accelerator for the High Current Injector of the TSR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1340-1343.
[n] T. Satogata et al., “Physics of the AGS-To-RHIC Transfer Line Commissioning”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP006G, pp. 2379-2381.
[n] J. G. Wang, B. Liu, and W. Wu, “Sub-20 fs Synchronization Between Mode-Locked Laser and Radio Frequency Signal”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 151-153. doi:10.18429/JACoW-IBIC2023-TU2C03
[n] S. K. Guharay, C. K. Allen, M. Reiser, C. R. Chang, and K. Saadatmand, “A Compact ESQ System for Transport and Focusing of H- Beam from Ion Source to RFQ”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-16, pp. 338-340.
[n] S. Fu, J. Li, H. C. Liu, H. F. Ouyang, and X. Yin, “Linac Construction for China Spallation Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB023, pp. 897-899.
For LaTeX
Use Complete Form
For BibTeX
References
- J. T. Takahashi, H. Nakanishi, S. Sakanaka, and K. Umemori, “Experience of Driving Three RF Cavities by a Single Klystron in the Photon Factory Advanced Ring (PF-AR)”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16034, pp. XX-XX.
- M. L. Mallory, W. S. Chien, and P. S. Miller, “A Quick Change Axial Cold Cathode Heavy Ion Source”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1593-1594.
- P. Kuske and K. Ott, “Beam-Based Alignment at BESSY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP001L, pp. 887-889.
- A. Faus-Golfe and A. Verdier, “Dynamic Aperture Limitations of the LHC in Physics Conditions due to Low-Beta Insertions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP023L, pp. 902-904.
- J. A. Crittenden, M. A. Palmer, and J. T. Urban, “Design Considerations and Modeling Results for ILC Damping Ring Wigglers Based on the CESR-c Superconducting Wiggler”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS011, pp. 3014-3016.
- A. Galejs and P. Trent, “Design and Evaluation of Particle Beam Handling Systems”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 232-234.
- J. T. Urban, G. Dugan, and M. A. Palmer, “Optimization of CESR-c Superferric Wiggler for the International Linear Collider Damping Rings”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS142, pp. 894-896.
- R. W. Connatser, “Interfaces with Operational Systems APS Upgrade Project Removal and Installation”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 43-44.
- L. Garolfi, C. Bruni, M. El Khaldi, P. Lepercq, C. Vallerand, and N. Faure, “Beam Dynamics Simulations of the Thomx Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3036-3039.
- S. Fu, J. Li, H. C. Liu, H. F. Ouyang, and X. Yin, “Linac Construction for China Spallation Neutron Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB01, pp. 807-809.
- M. A. Palmer, M. Ehrlichman, R. W. Helms, D. L. Rubin, D. Sagan, and J. T. Urban, “The Proposed Conversion of CESR to an ILC Damping Ring Test Facility”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS141, pp. 891-893.
- S. Gerstl et al., “First Measurements of COLDDIAG: A Cold Vacuum Chamber for Diagnostics”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP069, pp. 720-722.
- G. Loisch et al., “Optimisation of High Transformer Ratio Plasma Wakefield Acceleration at PITZ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1648-1650.
- L. Bottura, A. Faus-Golfe, L. Walckiers, and R. Wolf, “Field Quality of the Main Dipole Magnets for the LHC Accelerator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP010G, pp. 2228-2230.
- M. Blaskiewicz and J. M. Brennan, “A Barrier Bucket Experiment for Accumulating De-bunched Beam in the AGS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP002G, pp. 2373-2375.
- C. R. Chang, “Design Studies of SSC Low-Energy-Beam-Transport System using Einzel Lenses”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU435, pp. 399-401.
- W. S. Gibbs and J. D. Gilpatrick, “Accelerators at Los Alamos Today”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper MOKNB01, pp. 20-20.
- W. S. C. Henry, “Power System Operation in the Cambridge Electron Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 517-519.
- J. Gao, J. Le Duff, and Y. Thiery, “Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB01, pp. 95-97.
- J. T. Urban and G. Dugan, “CESR-c Wiggler Studies in the Context of the International Linear Collider Damping Rings”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP025, pp. 1880-1882.
- H. Monard et al., “A Laser Triggered Electron Source for Pulsed Radiolysis”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA55, pp. 2012-2014.
- K. Ott, “Quadrupole Misalignment Determination at BESSY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP002L, pp. 890-892.
- J. T. Urban, L. J. Fields, and D. Sagan, “Linear Accelerator Simulations with BMAD”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP026, pp. 1937-1939.
- W. S. Chapman, “Phase Stability Studies for the ING Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 212-214.
- J. K. Park, Y.-S. Cho, H.-J. Kwon, K. T. Seol, and S. P. Yun, “Diffusion and Thermal Stability of Implanted Hydrogen in ZnO Nanorods”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1982-1984.
- K. R. Crandall, F. W. Guy, and D. A. Swenson, “Merits of the RFD Linac Structure for Proton and Light-Ion Acceleration Systems”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOO08A, pp. 307-312.
- C. M. Kleffner et al., “The RFQ-Accelerator for the High Current Injector of the TSR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1340-1343.
- T. Satogata et al., “Physics of the AGS-To-RHIC Transfer Line Commissioning”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP006G, pp. 2379-2381.
- J. G. Wang, B. Liu, and W. Wu, “Sub-20 fs Synchronization Between Mode-Locked Laser and Radio Frequency Signal”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU2C03, pp. 151-153.
- S. K. Guharay, C. K. Allen, M. Reiser, C. R. Chang, and K. Saadatmand, “A Compact ESQ System for Transport and Focusing of H- Beam from Ion Source to RFQ”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-16, pp. 338-340.
- S. Fu, J. Li, H. C. Liu, H. F. Ouyang, and X. Yin, “Linac Construction for China Spallation Neutron Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB023, pp. 897-899.
Back to search