Favourites
For Word
[n] E. Marshall, O. Malyshev, and R. Valizadeh, “The effect of small bends in thin non-evaporable getter coated tubes on the partial pressure ratio as a function of sticking probability”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4320-4323. doi:10.18429/JACoW-IPAC2023-THPA154
[n] R. Valizadeh, O. Malyshev, C. Benjamin, and J. Conlon, “Deposition of NbTiN and NbN on 6 GHz seamless copper cavity”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL145, unpublished.
[n] O. Brunner, E. Ciapala, and J. N. Schwerg, “RF Power Generation in LINAC4”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP052, pp. 869-871.
[n] K. Scibor et al., “SWELL 1.3 GHz Cavity fabrication approach and machining”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM016, unpublished.
[n] V. K. Gopalan et al., “Modernizing Digital Video Systems at the National Ignition Facility (NIF): Success Stories, Open Challenges and Future Directions”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 26-30. doi:10.18429/JACoW-ICALEPCS2021-MOAR02
[n] B.-T. Sian et al., “Split 6GHz SRF thin film cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3074-3077. doi:10.18429/JACoW-IPAC2023-WEPA185
[n] D.-P. Deng and S. Peggs, “Rebucketing After Transition in RHIC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR29, pp. 3421-3423.
[n] P. M. McIntyre, D. Neuffer, and W. Schmidt, “The Three Ring Circus”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1704-1707.
[n] J. Benesch et al., “CEBAF 22 GeV FFA energy upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 962-964. doi:10.18429/JACoW-IPAC2023-MOPL182
[n] G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
[n] A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
[n] B. H. Smith, “Survey of R-F Techniques Applicable to Variable-Energy Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C05, pp. 159-166.
[n] G. Lopez, “Quench Simulations of the 40 mm Aperture SSC-Quadrupole Magnet Connected in Series with 50 mm Aperture SSC-Dipole Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2784-2787.
[n] G. K. Brunton et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 15. doi:10.18429/JACoW-ICALEPCS2019-MOAPP04
[n] M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
[n] K. R. Kim et al., “Reliability and Maintenance of PLS Linac Mechanical Systems”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH475, pp. 770-772.
[n] M. J. Meigs, D. L. Haynes, C. M. Jones, and C. T. LeCroy, “A New Beam Intensity Monitoring System with Wide Dynamic Range for the Holifield Radioactive Ion Beam Facility”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC18, pp. 2643-2645.
[n] W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 551-556.
[n] M. Y. Yoshida et al., “Design of the COMET Pion Capture Solenoid”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC030, pp. 4116-4118.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Marshall, O. Malyshev, and R. Valizadeh, “The effect of small bends in thin non-evaporable getter coated tubes on the partial pressure ratio as a function of sticking probability”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA154, pp. 4320-4323.
- R. Valizadeh, O. Malyshev, C. Benjamin, and J. Conlon, “Deposition of NbTiN and NbN on 6 GHz seamless copper cavity”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL145, unpublished.
- O. Brunner, E. Ciapala, and J. N. Schwerg, “RF Power Generation in LINAC4”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP052, pp. 869-871.
- K. Scibor et al., “SWELL 1.3 GHz Cavity fabrication approach and machining”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM016, unpublished.
- V. K. Gopalan et al., “Modernizing Digital Video Systems at the National Ignition Facility (NIF): Success Stories, Open Challenges and Future Directions”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 26-30.
- B.-T. Sian et al., “Split 6GHz SRF thin film cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA185, pp. 3074-3077.
- D.-P. Deng and S. Peggs, “Rebucketing After Transition in RHIC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR29, pp. 3421-3423.
- P. M. McIntyre, D. Neuffer, and W. Schmidt, “The Three Ring Circus”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1704-1707.
- J. Benesch et al., “CEBAF 22 GeV FFA energy upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL182, pp. 962-964.
- G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
- A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
- B. H. Smith, “Survey of R-F Techniques Applicable to Variable-Energy Cyclotrons”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C05, pp. 159-166.
- G. Lopez, “Quench Simulations of the 40 mm Aperture SSC-Quadrupole Magnet Connected in Series with 50 mm Aperture SSC-Dipole Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2784-2787.
- G. K. Brunton et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 15.
- M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
- K. R. Kim et al., “Reliability and Maintenance of PLS Linac Mechanical Systems”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH475, pp. 770-772.
- M. J. Meigs, D. L. Haynes, C. M. Jones, and C. T. LeCroy, “A New Beam Intensity Monitoring System with Wide Dynamic Range for the Holifield Radioactive Ion Beam Facility”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC18, pp. 2643-2645.
- W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 551-556.
- M. Y. Yoshida et al., “Design of the COMET Pion Capture Solenoid”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC030, pp. 4116-4118.
Back to search