Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 196-201. doi:10.18429/JACoW-IBIC2022-TU2T1
[n] S.-H. Kim, M. Doleans, J. Galambos, M. P. Howell, and J. D. Mammosser, “Superconducting Linac Upgrade Plan for the Second Target Station Project at SNS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB069, pp. 268-271.
[n] R. Kuroda et al., “Development of Photocathode RF Gun and Laser System for Multi-collision Laser Compton Scattering”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN051, pp. 1037-1039.
[n] V. P. Romas, V. V. Zakutin, A. N. Dovbnya, N. G. Reshethyak, and M. A. Krasnogolovets, “PULSE MODULATORS FOR FEEDING MAGNETRON GUNS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP010, pp. XX-XX.
[n] E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3830-3833. doi:10.18429/JACoW-IPAC2021-THPAB040
[n] A. Fukasawa et al., “Commissioning a 1.5-m linac and its application in UCLA Mithra Laboratory”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS106, unpublished.
[n] Z. Zhu, C. Feng, M. Cai, and N. Huang, “Intelligent online optimization in X-ray free-electron lasers”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOOD2, unpublished.
[n] N. Jobert, E. Fonda, T. Moreno, and M. Ribbens, “Optomechanical Optimization for a Sagittaly Bent Double Crystal Monochromator, Using Finite Elements and Ray Tracing”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 231-234. doi:10.18429/JACoW-MEDSI2018-WEPH14
[n] C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 693-696. doi:10.18429/JACoW-ICALEPCS2015-WEPGF002
[n] S. Heidrich, K. Aulenbacher, M. W. Bruker, M. Dehn, and P. Heil, “High-Current Emittance Measurements at MAMI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4121-4123. doi:10.18429/JACoW-IPAC2019-THPTS009
[n] J. C. Dooling, L. Donley, G. E. McMichael, F. R. Brumwell, and V. F. Stipp, “Beam Analysis Using the IPNS Linac ESEM”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP61, pp. 405-407.
[n] A. Maekawa et al., “Monoenergetic 200fs (FWHM) Electron Bunch Measurement from the Laser Plasma Cathode”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS029, pp. 2451-2453.
[n] J. Dinkel and R. Reilly, “An Upgraded Proton Injection Kicker Magnet for the Fermilab MIR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA05, pp. 1236-1238.
[n] J. Callahan, A. Rodriguez Alicea, J. Mendez, L. Cultrera, O. Chubenko, and S. Karkare, “Monte Carlo modeling of spin-polarized photoemission from GaAs with low-temperature and strained-lattice effects”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2119-2122. doi:10.18429/JACoW-IPAC2024-WEPC65
[n] S. Schreiber, C. Gruen, K. Klose, J. Roensch, and B. Steffen, “Simultaneous Operation of Three Laser Systems at the FLASH Photoinjector”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 459-463. doi:10.18429/JACoW-FEL2015-TUP041
[n] I. D. Valova, “Cubes in OLAP Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP065, pp. 3354-3354.
[n] T. W. Eagar, “Resistive Measurements on an Improved Nb-A1-Ge Superconducting Ribbon”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 742-744.
[n] L. Zhang, “Preliminary Absorber Design for the Ultimate Storage Ring Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO028, pp. 2592-2594.
For LaTeX
Use Complete Form
For BibTeX
References
- J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 196-201.
- S.-H. Kim, M. Doleans, J. Galambos, M. P. Howell, and J. D. Mammosser, “Superconducting Linac Upgrade Plan for the Second Target Station Project at SNS”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB069, pp. 268-271.
- R. Kuroda et al., “Development of Photocathode RF Gun and Laser System for Multi-collision Laser Compton Scattering”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN051, pp. 1037-1039.
- V. P. Romas, V. V. Zakutin, A. N. Dovbnya, N. G. Reshethyak, and M. A. Krasnogolovets, “PULSE MODULATORS FOR FEEDING MAGNETRON GUNS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP010, pp. XX-XX.
- E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3830-3833.
- A. Fukasawa et al., “Commissioning a 1.5-m linac and its application in UCLA Mithra Laboratory”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS106, unpublished.
- Z. Zhu, C. Feng, M. Cai, and N. Huang, “Intelligent online optimization in X-ray free-electron lasers”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOOD2, unpublished.
- N. Jobert, E. Fonda, T. Moreno, and M. Ribbens, “Optomechanical Optimization for a Sagittaly Bent Double Crystal Monochromator, Using Finite Elements and Ray Tracing”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 231-234.
- C. I. Briegel, R. Neswold, and M. Z. Sliczniak, “A Protocol for Streaming Large Messages with UDP”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 693-696.
- S. Heidrich, K. Aulenbacher, M. W. Bruker, M. Dehn, and P. Heil, “High-Current Emittance Measurements at MAMI”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4121-4123.
- J. C. Dooling, L. Donley, G. E. McMichael, F. R. Brumwell, and V. F. Stipp, “Beam Analysis Using the IPNS Linac ESEM”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP61, pp. 405-407.
- A. Maekawa et al., “Monoenergetic 200fs (FWHM) Electron Bunch Measurement from the Laser Plasma Cathode”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS029, pp. 2451-2453.
- J. Dinkel and R. Reilly, “An Upgraded Proton Injection Kicker Magnet for the Fermilab MIR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA05, pp. 1236-1238.
- J. Callahan, A. Rodriguez Alicea, J. Mendez, L. Cultrera, O. Chubenko, and S. Karkare, “Monte Carlo modeling of spin-polarized photoemission from GaAs with low-temperature and strained-lattice effects”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC65, pp. 2119-2122.
- S. Schreiber, C. Gruen, K. Klose, J. Roensch, and B. Steffen, “Simultaneous Operation of Three Laser Systems at the FLASH Photoinjector”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 459-463.
- I. D. Valova, “Cubes in OLAP Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP065, pp. 3354-3354.
- T. W. Eagar, “Resistive Measurements on an Improved Nb-A1-Ge Superconducting Ribbon”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 742-744.
- L. Zhang, “Preliminary Absorber Design for the Ultimate Storage Ring Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO028, pp. 2592-2594.
Back to search
