Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Wroe and N. D. West, “High Current Commissioning of the H- Ion Accelerating Column of the ISIS Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1439-1442.
[n] J. Choi, K. M. Ha, and J. M. Kim, “Control System Development for the KOMAC Vacuum System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP522, pp. XX-XX.
[n] G. Orlandi, C. Benvenuti, S. Calatroni, and F. Scalambrin, “Expected Dependence of Nb-Coated RF Cavity Performance on the Characteristics of Niobium”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I19, pp. XX-XX.
[n] P. J. Bell, V. H. Hardion, and V. Michel, “100Hz Data Acquisition in the TANGO Control System at the Max IV Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 209-211. doi:10.18429/JACoW-ICALEPCS2015-MOPGF049
[n] W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1593-1598.
[n] A. Sytov et al., “Full simulation model of crystal-based extraction from an accelerator using BDSim and Geant4 G4ChannelingFastSimModel”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS124, unpublished.
[n] K. I. Kuzmenkov et al., “Production of Metal Ion Beams from ECR Ion Sources by MIVOC Method”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC47, pp. 432-434.
[n] E. Kako et al., “High Gradient Tests of 1.3 GHz Superconducting Cavities”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-77, pp. 251-253.
[n] I. Vladimirov et al., “Performance of the Magnetic System of a 12 MeV UPC Race-Track Microtron”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC014, pp. 472-474.
[n] C. J. Gardner et al., “Setup and Performance of RHIC for the 2008 Run with Deuteron and Gold Collisions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP011, pp. 2548-2550.
[n] R. Bartolini et al., “Optimisation of a Single-Pass Superconducting Linac as a FEL Driver for the NLS Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEOB02, pp. 480-487.
[n] K. Kishiyama, S. Shen, D. Behne, N. G. Wilson, D. Schrage, and R. Valdiviez, “Testing of Vacuum Pumps for the APT/LEDA RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4095, pp. 624-626.
[n] E. R. Lamb, F. Asvesta, H. Bartosik, and G. Sterbini, “Measurement of Transverse Statistical Dependence for Non-Gaussian Beam Distributions via Resonances in the CERN PSB”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 231-235. doi:10.18429/JACoW-HB2023-WEA2C2
[n] D. Leroy, M. Castiglioni, and D. Hagedorn, “A 5m Long Impregnated NbTi Dipole Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3701-3704.
[n] K. MacKenzie, L. Kanstein, R. Sorensen, L. Glasgow, and J. Vale, “The Berkeley Synchrocyclotron Improvement Programme”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H02, pp. XX-XX.
[n] J. Hu, H.-S. Kang, and H.-S. Lee, “Development Activites Related to RF Cables for Good Phase Stability”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 654-657. doi:10.18429/JACoW-FEL2015-WEP037
[n] J. Y. Huang et al., “Beam Diagnostic System for PAL-XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP044, pp. XX-XX.
[n] M. L. Friend, “Beam Diagnosis and Soundness Check System for Neutrino Production Targets”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper WEC1I2, unpublished.
[n] J. Hormes, “Wednesday Welcome by Josef Hormes”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WETA01, pp. XX-XX.
[n] D. Kayran et al., “Status of High Current R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP006, pp. 2148-2150.
[n] G. Burt et al., “Manufacture of a Compact Prototype 4R Crab Cavity for HL-LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO051, pp. 2420-2422.
[n] M. Haj Tahar et al., “Proton Beamline Simulations for the High Intensity Muon Beamline at PSI”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2036-2039. doi:10.18429/JACoW-IPAC2022-WEPOTK006
[n] A. Crisol et al., “ALBA BL20 New Monochromator Design”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 14. doi:10.18429/JACoW-MEDSI2020-MOOB02
[n] G. T. Semissatto, H. F. Canova, F. H. Cardoso, and J. Souza, “Beamline Supervisory System Using a Low-Cost Single-Board Computer”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 50-52. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO23
[n] J. Y. Huang, C. Kim, I. S. Ko, and Y. W. Parc, “Comparative Study of Electro-Optic Effect between Simulation and Measurement”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH041, pp. 104-106.
[n] M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3827-3829. doi:10.18429/JACoW-IPAC2024-THPS41
[n] S. C. P. Albright, C. H. Grindheim, A. Lasheen, and A. H. C. Lu, “Recent Developments in Longitudinal Phase Space Tomography”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 347-350. doi:10.18429/JACoW-IPAC2022-MOPOPT043
[n] L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2961-2964.
[n] R. von Hahn et al., “The 7-Gap Resonators for the High Current Injector of the Heidelberg Test Storage Ring TSR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1313-1316.
[n] R. Tom?ís, M. Aiba, R. Calaga, A. Morita, G. Vanbavinckhove, and J. Wenninger, “Beta-Beating Corrections in the SPS as a Testbed for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP022, pp. 2534-2536.
[n] S. Calatroni, C. Benvenuti, and V. Ruzinov, “Diffusion of Oxygen in Niobium during Bake-out”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR025, pp. XX-XX.
[n] T.-C. Tseng et al., “A vibrating wire system for multipole magnets alignment in TPS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB014, unpublished.
[n] W.-Y. Lai et al., “Design and fabrication of the automation system in TLS BL07A end station”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3785-3787. doi:10.18429/JACoW-IPAC2024-THPS23
[n] C. Benvenuti, “Extreme High Vacuum Technology for Particle Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPB002, pp. 602-606.
[n] M. Schwarz et al., “Flat-Bottom Instabilities in the CERN SPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3224-3227. doi:10.18429/JACoW-IPAC2019-WEPTS049
[n] S. Fartoukh and J. P. Koutchouk, “Chromatic Coupling in LHC and its Correction”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B11, pp. 1486-1488.
[n] I. Zagorodnov, “Ultra-Short Low Charge Operation at FLASH and the European XFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOBI2, pp. 345-352.
[n] K. Watanabe et al., “Recent Result of Cavity Inspection for the Superconducting Cavities at KEK-STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP073, pp. 993-995.
[n] S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 407-409. doi:10.18429/JACoW-IPAC2022-MOPOPT063
[n] T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1076-1079.
[n] N. Yu. Peskov et al., “Development of Powerful Long-Pulse THz-Band FEL Driven by Linear Induction Accelerator”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 58-60. doi:10.18429/JACoW-RuPAC2021-TUC03
[n] A. van Steenbergen, “AGS Preinjector Beam Emittance Area and Emittance Area Density Distribution Measurements”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper D-08, pp. 338-380.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Wroe and N. D. West, “High Current Commissioning of the H- Ion Accelerating Column of the ISIS Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1439-1442.
- J. Choi, K. M. Ha, and J. M. Kim, “Control System Development for the KOMAC Vacuum System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP522, pp. XX-XX.
- G. Orlandi, C. Benvenuti, S. Calatroni, and F. Scalambrin, “Expected Dependence of Nb-Coated RF Cavity Performance on the Characteristics of Niobium”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I19, pp. XX-XX.
- P. J. Bell, V. H. Hardion, and V. Michel, “100Hz Data Acquisition in the TANGO Control System at the Max IV Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 209-211.
- W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1593-1598.
- A. Sytov et al., “Full simulation model of crystal-based extraction from an accelerator using BDSim and Geant4 G4ChannelingFastSimModel”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS124, this conference.
- K. I. Kuzmenkov et al., “Production of Metal Ion Beams from ECR Ion Sources by MIVOC Method”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC47, pp. 432-434.
- E. Kako et al., “High Gradient Tests of 1.3 GHz Superconducting Cavities”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-77, pp. 251-253.
- I. Vladimirov et al., “Performance of the Magnetic System of a 12 MeV UPC Race-Track Microtron”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC014, pp. 472-474.
- C. J. Gardner et al., “Setup and Performance of RHIC for the 2008 Run with Deuteron and Gold Collisions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP011, pp. 2548-2550.
- R. Bartolini et al., “Optimisation of a Single-Pass Superconducting Linac as a FEL Driver for the NLS Project”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEOB02, pp. 480-487.
- K. Kishiyama, S. Shen, D. Behne, N. G. Wilson, D. Schrage, and R. Valdiviez, “Testing of Vacuum Pumps for the APT/LEDA RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4095, pp. 624-626.
- E. R. Lamb, F. Asvesta, H. Bartosik, and G. Sterbini, “Measurement of Transverse Statistical Dependence for Non-Gaussian Beam Distributions via Resonances in the CERN PSB”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA2C2, pp. 231-235.
- D. Leroy, M. Castiglioni, and D. Hagedorn, “A 5m Long Impregnated NbTi Dipole Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3701-3704.
- K. MacKenzie, L. Kanstein, R. Sorensen, L. Glasgow, and J. Vale, “The Berkeley Synchrocyclotron Improvement Programme”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69H02, pp. XX-XX.
- J. Hu, H.-S. Kang, and H.-S. Lee, “Development Activites Related to RF Cables for Good Phase Stability”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 654-657.
- J. Y. Huang et al., “Beam Diagnostic System for PAL-XFEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP044, pp. XX-XX.
- M. L. Friend, “Beam Diagnosis and Soundness Check System for Neutrino Production Targets”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC1I2, unpublished.
- J. Hormes, “Wednesday Welcome by Josef Hormes”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WETA01, pp. XX-XX.
- D. Kayran et al., “Status of High Current R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP006, pp. 2148-2150.
- G. Burt et al., “Manufacture of a Compact Prototype 4R Crab Cavity for HL-LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO051, pp. 2420-2422.
- M. Haj Tahar et al., “Proton Beamline Simulations for the High Intensity Muon Beamline at PSI”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2036-2039.
- A. Crisol et al., “ALBA BL20 New Monochromator Design”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 14.
- G. T. Semissatto, H. F. Canova, F. H. Cardoso, and J. Souza, “Beamline Supervisory System Using a Low-Cost Single-Board Computer”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 50-52.
- J. Y. Huang, C. Kim, I. S. Ko, and Y. W. Parc, “Comparative Study of Electro-Optic Effect between Simulation and Measurement”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH041, pp. 104-106.
- M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS41, pp. 3827-3829.
- S. C. P. Albright, C. H. Grindheim, A. Lasheen, and A. H. C. Lu, “Recent Developments in Longitudinal Phase Space Tomography”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 347-350.
- L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2961-2964.
- R. von Hahn et al., “The 7-Gap Resonators for the High Current Injector of the Heidelberg Test Storage Ring TSR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1313-1316.
- R. Tom?ís, M. Aiba, R. Calaga, A. Morita, G. Vanbavinckhove, and J. Wenninger, “Beta-Beating Corrections in the SPS as a Testbed for the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP022, pp. 2534-2536.
- S. Calatroni, C. Benvenuti, and V. Ruzinov, “Diffusion of Oxygen in Niobium during Bake-out”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR025, pp. XX-XX.
- T.-C. Tseng et al., “A vibrating wire system for multipole magnets alignment in TPS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB014, this conference.
- W.-Y. Lai et al., “Design and fabrication of the automation system in TLS BL07A end station”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS23, pp. 3785-3787.
- C. Benvenuti, “Extreme High Vacuum Technology for Particle Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPB002, pp. 602-606.
- M. Schwarz et al., “Flat-Bottom Instabilities in the CERN SPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3224-3227.
- S. Fartoukh and J. P. Koutchouk, “Chromatic Coupling in LHC and its Correction”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B11, pp. 1486-1488.
- I. Zagorodnov, “Ultra-Short Low Charge Operation at FLASH and the European XFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOBI2, pp. 345-352.
- K. Watanabe et al., “Recent Result of Cavity Inspection for the Superconducting Cavities at KEK-STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP073, pp. 993-995.
- S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 407-409.
- T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1076-1079.
- N. Yu. Peskov et al., “Development of Powerful Long-Pulse THz-Band FEL Driven by Linear Induction Accelerator”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 58-60.
- A. van Steenbergen, “AGS Preinjector Beam Emittance Area and Emittance Area Density Distribution Measurements”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper D-08, pp. 338-380.
Back to search