Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Chouhan, A. Netepenko, D. Bice, D. Burk, G. Wu, and T. Ring, “Centrifugal barrel polishing of a 650 MHz single-cell niobium SRF cavity”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP010, unpublished.
[n] J. G. Alessi, J. M. Brennan, A. Kponou, V. LoDestro, and P. A. Montemurro, “The BNL 200 MeV H- Linac - Performance and Upgrades”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH432, pp. 674-676.
[n] M. Khojoyan, A. Cauchois, J. Prudent, and A. Specka, “A Compact Permanent Magnet Spectrometer for CILEX”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 320-324. doi:10.18429/JACoW-ICAP2018-WEPAF01
[n] V. G. Mudrolyubov et al., “The CC1-3 Cyclotron System. Installation and Test Results”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 182-184. doi:10.18429/JACoW-RUPAC2016-TUCASH05
[n] D. Giove et al., “Study and Design of Room Temperature Cavities for an RF Compressor Prototype”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB019, pp. 2080-2082.
[n] F. Hug, T. Kuerzeder, and N. Pietralla, “Upcoming Measurements of Transverse Beam Break-Up at the Superconducting Recirculating Electron Accelerator S-DALINAC”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS09, pp. 97-99.
[n] P. F. Meads and F. B. Selph, “Extraction and Transfer of High-Quality Beams from Synchrotrons of the FOOFDOD Type with Application to the Omnitron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 242-246.
[n] S. U. De Silva, K. E. Deitrick, J. R. Delayen, and H. Park, “Beam Dynamics Studies of 499 MHz Superconducting RF-Dipole Deflecting Cavity System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3564-3567. doi:10.18429/JACoW-IPAC2015-WEPWI035
[n] A. Reichold et al., “The LiCAS-RTRS -- A Survey System for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH195, pp. 520-522.
[n] C. Boffo et al., “Fabrication of the New Superconducting Undulator for the ANKA Synchrotron Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD021, pp. 3135-3137.
[n] Y. Asano and T. Bizen, “Estimations for Demagnetization of ID Permanent Magnets due to Installation of OTR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC165, pp. 3281-3283.
[n] J. M. Jimenez et al., “MedAustron Beam Vacuum System : From sources to Patient Treatment Rooms”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS022, pp. 1572-1574.
[n] H. L. Hagedoorn and N. F. Verster, “The Magnetic Field of a Two-Particle Fixed Energy AVF Cyclotron without Trimming Coils”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F07, pp. XX-XX.
[n] L. Liu et al., “Update on Sirius, the New Brazilian Synchrotron Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 191-193. doi:10.18429/JACoW-IPAC2014-MOPRO048
[n] K. E. Deitrick, J. R. Delayen, and G. A. Krafft, “High Average Brilliance Compact Inverse Compton Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 932-935. doi:10.18429/JACoW-IPAC2017-MOPVA036
[n] K. E. Deitrick, J. R. Delayen, B. R. P. Gamage, G. A. Krafft, and T. Satogata, “Progress on a Compact Accelerator Design for a Compton Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1706-1708. doi:10.18429/JACoW-IPAC2015-TUPJE041
[n] G. T. de Kruiff and N. F. Verster, “A Modified Regenerative Extractor System for a Synchro - Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63B05, pp. XX-XX.
[n] P. Cruikshank, S. D. Claudet, W. Maan, L. Mourier, A. Perrier-Cornet, and N. Provot, “Leak Tightness of LHC Cold Vacuum Systems”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS020, pp. 1566-1568.
[n] T. Bizen, “Brief Review of the Approaches to Elucidate the Mechanism of the Radiation-induced Demagnetization”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG5005, pp. 121-126.
[n] K. Dunkel, U. Berges, M. Grewe, R. Heine, and T. Weis, “Evaluation and Modeling of Longitudinal Storage Ring Impedance using Current Dependent Bunch Lengthening and Bunch Deformation Effects”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI024, pp. 1476-1478.
[n] L. Hoummi, L. Carver, N. Carmignani, S. White, S. Liuzzo, and T. Perron, “Towards a true diffraction limited light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2569-2574. doi:10.18429/JACoW-IPAC2023-WEXG1
[n] A. Seryi et al., “ATF2 Commissioning”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209.
[n] T. Satogata, I. Campbell, G. Marr, and P. Sampson, “Operations Electronic Logbook Experience at BNL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO009, pp. 2049-2051.
[n] S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2474-2476. doi:10.18429/JACoW-IPAC2014-WEPRI001
[n] V. Porshyn, D. L??tzenkirchen-Hecht, P. Serbun, H. B??rger, and S. Soykarci, “Laser Treatment of Niobium Surface for SRF Aplications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2387-2390. doi:10.18429/JACoW-IPAC2018-WEPMF010
[n] P.-Y. Beauvais, R. Ferdinand, G. Haouat, S. Nath, and N. Pichoff, “Measurement of Space Charge-Dynamics Effects in a FODO Channel”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP25G, pp. 1124-1126.
[n] P. A. Gurd and R. Keitel, “CPP/CXML - a Host-Based Sequencer for EPICS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP038, pp. 173-175.
[n] F. H. de Sá, L. Liu, and X. R. Resende, “Implementation of a Low-Emittance Optics for the LNLS UVX Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC002, pp. 2907-2908.
[n] K. E. Deitrick, A. Hutton, A. C. Bartnik, C. M. Gulliford, and S. A. Overstreet, “Novel Straight Merger for Energy Recovery Linacs”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 702-705. doi:10.18429/JACoW-LINAC2018-THPO010
[n] D. M. Gassner, C. Liu, R. J. Michnoff, T. A. Miller, M. G. Minty, and M. Wilinski, “Status of the BNL ERL Instrumentation”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS11, pp. 100-105.
[n] R. W. Roeth, H.-G. Kuerschner, G. Mueller, H. Piel, and D. Reschke, “Thermal Stability of Superconducting Nb Cavities at 3 GHz”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1325-1328.
[n] L. Liu, N. Milas, A. H. C. Mukai, X. R. Resende, and F. H. de S?í, “UPGRADED OPTICS FOR SIRIUS WITH IMPROVED MATCHING OF ELECTRON AND PHOTON BEAM EMITTANCES”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1407-1409. doi:10.18429/JACoW-IPAC2015-TUPWA007
[n] S. White, L. Carver, L. Farvacque, and S. Liuzzo, “Status and recent developments of python Accelerator Toolbox”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3185-3188. doi:10.18429/JACoW-IPAC2023-WEPL031
[n] G. Arnolds-Mayer, K. Jaeger, and R. Mayer, “Industrial Production of 8 Superconducting Accelerator Modules for HERA and 6 Superconducting Accelerating Cavities for DALINAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1070-1073.
[n] P. Pierini et al., “RF Tests of the Single Cell Prototypes for the TRASCO beta=0.47 Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO023, pp. 2277-2279.
[n] J. F. Bouteille, “A High Quality Power Supply at the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2335-2338.
[n] M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
[n] B. Rusnak, “High Intensity Proton Linacs”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
[n] C. S. Hopper, K. E. Deitrick, and J. R. Delayen, “Geometry Effects on Multipole Components and Beam Optics in High-Velocity Multi-Spoke Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC42, pp. 868-870.
[n] L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. IPAC'20, Caen, France, May 2020, pp. 11. doi:10.18429/JACoW-IPAC2020-MOVIR06
[n] C. Compton et al., “Studies of alternative techniques for niobium cavity fabrication”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP01, pp. XX-XX.
[n] V. M. Biryukov, Y. A. Chesnokov, V. I. Kotov, D. Trbojevic, and A. Stevens, “Optimization of the Parameters in the RHIC Single Crystal Heavy Ion Collimation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA66, pp. 1237-1239.
[n] C. Pardine, R. H. A. Farias, and P. F. Tavares, “Commissioning of the 2,2 kW, 476 MHz Solid State RF Power Source for the LNLS Booster Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD029, pp. 511-513.
[n] H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
[n] S. L. Smith and L. A. Welbourne, “Bump Compensation and System Error Detection using a Microsoft EXCEL Spread Sheet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1024-1027.
[n] A.-L. Perrot, M. B. M. Barberan Marin, J.-P. Corso, K. Foraz, M. Lazzaroni, and Y. Muttoni, “Actions To Mitigate The Radiation Damage to Electronics at the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA041, pp. 2591-2593.
[n] S. Cavalier, P. M. Puzo, H. Burkhardt, and A. Peskov, “90 m * Optics for ATLAS/ALFA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ002, pp. 1798-1800.
[n] T. Suwada, M. Satoh, K. Minoshima, and S. Telada, “Development of a Laser-based Alignment System Utilizing Fresnel Zone Plates at the KEKB Injector Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD065, pp. 2672-2674.
[n] T. Suwada, M. Satoh, K. Minoshima, and S. Telada, “Recent Progress of a Laser-based Alignment System at the KEKB Injector Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME016, pp. 2959-2961.
[n] J. Teichert et al., “Progress of SRF Gun Development and Operation at the ELBE Accelerator”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG101, pp. 11-15.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Chouhan, A. Netepenko, D. Bice, D. Burk, G. Wu, and T. Ring, “Centrifugal barrel polishing of a 650 MHz single-cell niobium SRF cavity”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEP010, unpublished.
- J. G. Alessi, J. M. Brennan, A. Kponou, V. LoDestro, and P. A. Montemurro, “The BNL 200 MeV H- Linac - Performance and Upgrades”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH432, pp. 674-676.
- M. Khojoyan, A. Cauchois, J. Prudent, and A. Specka, “A Compact Permanent Magnet Spectrometer for CILEX”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 320-324.
- V. G. Mudrolyubov et al., “The CC1-3 Cyclotron System. Installation and Test Results”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 182-184.
- D. Giove et al., “Study and Design of Room Temperature Cavities for an RF Compressor Prototype”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB019, pp. 2080-2082.
- F. Hug, T. Kuerzeder, and N. Pietralla, “Upcoming Measurements of Transverse Beam Break-Up at the Superconducting Recirculating Electron Accelerator S-DALINAC”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PS09, pp. 97-99.
- P. F. Meads and F. B. Selph, “Extraction and Transfer of High-Quality Beams from Synchrotrons of the FOOFDOD Type with Application to the Omnitron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 242-246.
- S. U. De Silva, K. E. Deitrick, J. R. Delayen, and H. Park, “Beam Dynamics Studies of 499 MHz Superconducting RF-Dipole Deflecting Cavity System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3564-3567.
- A. Reichold et al., “The LiCAS-RTRS -- A Survey System for the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH195, pp. 520-522.
- C. Boffo et al., “Fabrication of the New Superconducting Undulator for the ANKA Synchrotron Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD021, pp. 3135-3137.
- Y. Asano and T. Bizen, “Estimations for Demagnetization of ID Permanent Magnets due to Installation of OTR”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC165, pp. 3281-3283.
- J. M. Jimenez et al., “MedAustron Beam Vacuum System : From sources to Patient Treatment Rooms”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS022, pp. 1572-1574.
- H. L. Hagedoorn and N. F. Verster, “The Magnetic Field of a Two-Particle Fixed Energy AVF Cyclotron without Trimming Coils”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F07, pp. XX-XX.
- L. Liu et al., “Update on Sirius, the New Brazilian Synchrotron Light Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 191-193.
- K. E. Deitrick, J. R. Delayen, and G. A. Krafft, “High Average Brilliance Compact Inverse Compton Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 932-935.
- K. E. Deitrick, J. R. Delayen, B. R. P. Gamage, G. A. Krafft, and T. Satogata, “Progress on a Compact Accelerator Design for a Compton Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1706-1708.
- G. T. de Kruiff and N. F. Verster, “A Modified Regenerative Extractor System for a Synchro - Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63B05, pp. XX-XX.
- P. Cruikshank, S. D. Claudet, W. Maan, L. Mourier, A. Perrier-Cornet, and N. Provot, “Leak Tightness of LHC Cold Vacuum Systems”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS020, pp. 1566-1568.
- T. Bizen, “Brief Review of the Approaches to Elucidate the Mechanism of the Radiation-induced Demagnetization”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG5005, pp. 121-126.
- K. Dunkel, U. Berges, M. Grewe, R. Heine, and T. Weis, “Evaluation and Modeling of Longitudinal Storage Ring Impedance using Current Dependent Bunch Lengthening and Bunch Deformation Effects”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI024, pp. 1476-1478.
- L. Hoummi, L. Carver, N. Carmignani, S. White, S. Liuzzo, and T. Perron, “Towards a true diffraction limited light source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEXG1, pp. 2569-2574.
- A. Seryi et al., “ATF2 Commissioning”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209.
- T. Satogata, I. Campbell, G. Marr, and P. Sampson, “Operations Electronic Logbook Experience at BNL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO009, pp. 2049-2051.
- S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2474-2476.
- V. Porshyn, D. L??tzenkirchen-Hecht, P. Serbun, H. B??rger, and S. Soykarci, “Laser Treatment of Niobium Surface for SRF Aplications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2387-2390.
- P.-Y. Beauvais, R. Ferdinand, G. Haouat, S. Nath, and N. Pichoff, “Measurement of Space Charge-Dynamics Effects in a FODO Channel”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP25G, pp. 1124-1126.
- P. A. Gurd and R. Keitel, “CPP/CXML - a Host-Based Sequencer for EPICS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP038, pp. 173-175.
- F. H. de Sá, L. Liu, and X. R. Resende, “Implementation of a Low-Emittance Optics for the LNLS UVX Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC002, pp. 2907-2908.
- K. E. Deitrick, A. Hutton, A. C. Bartnik, C. M. Gulliford, and S. A. Overstreet, “Novel Straight Merger for Energy Recovery Linacs”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 702-705.
- D. M. Gassner, C. Liu, R. J. Michnoff, T. A. Miller, M. G. Minty, and M. Wilinski, “Status of the BNL ERL Instrumentation”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PS11, pp. 100-105.
- R. W. Roeth, H.-G. Kuerschner, G. Mueller, H. Piel, and D. Reschke, “Thermal Stability of Superconducting Nb Cavities at 3 GHz”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1325-1328.
- L. Liu, N. Milas, A. H. C. Mukai, X. R. Resende, and F. H. de S?í, “UPGRADED OPTICS FOR SIRIUS WITH IMPROVED MATCHING OF ELECTRON AND PHOTON BEAM EMITTANCES”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1407-1409.
- S. White, L. Carver, L. Farvacque, and S. Liuzzo, “Status and recent developments of python Accelerator Toolbox”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL031, pp. 3185-3188.
- G. Arnolds-Mayer, K. Jaeger, and R. Mayer, “Industrial Production of 8 Superconducting Accelerator Modules for HERA and 6 Superconducting Accelerating Cavities for DALINAC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1070-1073.
- P. Pierini et al., “RF Tests of the Single Cell Prototypes for the TRASCO beta=0.47 Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO023, pp. 2277-2279.
- J. F. Bouteille, “A High Quality Power Supply at the ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2335-2338.
- M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
- B. Rusnak, “High Intensity Proton Linacs”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
- C. S. Hopper, K. E. Deitrick, and J. R. Delayen, “Geometry Effects on Multipole Components and Beam Optics in High-Velocity Multi-Spoke Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC42, pp. 868-870.
- L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 11.
- C. Compton et al., “Studies of alternative techniques for niobium cavity fabrication”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP01, pp. XX-XX.
- V. M. Biryukov, Y. A. Chesnokov, V. I. Kotov, D. Trbojevic, and A. Stevens, “Optimization of the Parameters in the RHIC Single Crystal Heavy Ion Collimation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA66, pp. 1237-1239.
- C. Pardine, R. H. A. Farias, and P. F. Tavares, “Commissioning of the 2,2 kW, 476 MHz Solid State RF Power Source for the LNLS Booster Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD029, pp. 511-513.
- H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
- S. L. Smith and L. A. Welbourne, “Bump Compensation and System Error Detection using a Microsoft EXCEL Spread Sheet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1024-1027.
- A.-L. Perrot, M. B. M. Barberan Marin, J.-P. Corso, K. Foraz, M. Lazzaroni, and Y. Muttoni, “Actions To Mitigate The Radiation Damage to Electronics at the LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA041, pp. 2591-2593.
- S. Cavalier, P. M. Puzo, H. Burkhardt, and A. Peskov, “90 m * Optics for ATLAS/ALFA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ002, pp. 1798-1800.
- T. Suwada, M. Satoh, K. Minoshima, and S. Telada, “Development of a Laser-based Alignment System Utilizing Fresnel Zone Plates at the KEKB Injector Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD065, pp. 2672-2674.
- T. Suwada, M. Satoh, K. Minoshima, and S. Telada, “Recent Progress of a Laser-based Alignment System at the KEKB Injector Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME016, pp. 2959-2961.
- J. Teichert et al., “Progress of SRF Gun Development and Operation at the ELBE Accelerator”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper WG101, pp. 11-15.
Back to search