Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. A. Clarke-Gayther, G. M. Allen, and A. I. Borden, “Global Beam Loss Monitoring using Long Ionisation Chambers at ISIS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1634-1637.
[n] Y. N. Rao, B. W. Wei, J. W. Xia, and Y. J. Yuan, “Lifetime of Ion Beam Stored in HIRFL-CSR”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper F-05, pp. 358-361.
[n] T. Tran-Ngoc, “Power Handling Capability of Water-Cooled Beam Stops”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-57, pp. 205-207.
[n] B. H. Smith, “High-Duty-Factor Conversion of the Berkeley Hilac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IX-04, pp. 467-470.
[n] K. S. Smith et al., “Progress on the SNS Ring LLRF Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB026, pp. 3344-3346.
[n] R. K. Agrawal et al., “Synchronous Ramping Scheme for SRS INDUS-2”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_017.
[n] N. Munemoto, S. Takano, K. Takayama, and I. Yamane, “Laser Ablation Ion Source for Highly Charge-State Ion Beams”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB19, pp. 234-237.
[n] G. H. Gillespie, B. W. Hill, and J. M. Moore, “Solving Complex Beamline Fitting and Optimization Problems with the Particle Beam Optics Lab PBO LabTM”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A10, pp. 1375-1377.
[n] K. Saifee, A. Chauhan, P. Fatnani, P. Gothwal, and C. P. Navathe, “Fast Data Acquisition System for Booster Supplies Readback”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD09, pp. 18-19.
[n] D. E. Kim et al., “Development of IVUN at Pohang Accelerator Laboratory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC115, pp. 2273-2275.
[n] N. Delerue et al., “Presentation of the Smith-Purcell Experiment at SOLEIL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC37, pp. 460-463.
[n] F. G. G. Garcia and W. Pellico, “Current and Planned High Proton Flux Operations at the FNAL Booster”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3A04, pp. 378-380.
[n] K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
[n] R. Frankel and C. Salwen, “Advanced Concepts in Accelerator Timing Control”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1087-1090.
[n] S. Biri et al., “Application of the ATOMKI-ECRIS for Materials Research and Prospects of the Medical Utilization”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-C04, pp. 41-47.
[n] D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 607-609.
[n] J. Hao et al., “R&D of Niobium-Sputtered Copper QWR for Heavy Ion Linac in Peking University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E206, pp. 304-308.
[n] L. J. Allen, “Operation and Improvements of the Fermilab 400MeV Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP03, pp. 329-331.
[n] B. W. Wei and J. W. Xia, “HIRFL-CSR Proposal”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper F-04, pp. 354-357.
[n] D. Gordo, R. Carrasco Dominguez, I. Martel, A. R. Pinto G??mez, and C. Gomez, “High-performance Accelerating Cryomodule for the LINCE Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3298-3300. doi:10.18429/JACoW-IPAC2014-THPME035
[n] F. Pellegrin and C. Rosenquist, “The ELT Linux Development Environment”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1125-1130. doi:10.18429/JACoW-ICALEPCS2017-THBPL05
[n] Y. Miyahara, “Computer Simulation of Stabilizing the Radiation Power of Storage Ring Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 879-882.
[n] E. Baron, L. Ah-Hot, and M. P. Bourgarel, “Injection and Stripping of a Heavy Ion Beam in the Orsay Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G07, pp. XX-XX.
[n] S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
[n] J. J. Zheng et al., “Applications of the Tune Measurement System of the HLS-II Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2892-2894. doi:10.18429/JACoW-IPAC2016-WEPOW028
[n] Z. Shen and Y. Wang, “Beam Diagnostic System of HIRFL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-06, pp. 295-297.
[n] M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
[n] S. Stoynev, K. H. Riemer, and A. V. Zlobin, “Quench Training Analysis of Nb3Sn Accelerator Magnets”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 155-157. doi:10.18429/JACoW-NAPAC2016-MOPOB40
[n] L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3890-3892. doi:10.18429/JACoW-IPAC2015-THPF086
[n] G. von Holtey and K. M. Potter, “Estimates of the Synchrotron Radiation Background in LEP Experiments”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1369-1372.
[n] V. V. Paramonov, L. V. Kravchuk, and V. A. Puntus, “The Cold Model of the CDS Structure”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4077, pp. 579-581.
[n] D. Schrage et al., “A 6.7 MeV CW RFQ Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W025, pp. 1093-1095.
[n] J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
[n] P. Chevtsov, V. Vrankovic, and Ch. S. Wouters, “Advanced Process Control Tool for Magnet Measurements at PSI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1934-1937. doi:10.18429/JACoW-ICALEPCS2017-THPHA211
[n] F. R. Osswald, “Seven Decades of Science with Accelerators at IPHC”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 104-107. doi:10.18429/JACoW-HIAT2022-TUP16
[n] V. M. Tsakanov, G. A. Amatuni, R. Brinkmann, and W. Decking, “Single Bunch Emittance Preservation in XFEL Linac”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG324, pp. XX-XX.
[n] K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 256-257. doi:10.18429/JACoW-RUPAC2016-TUPSA019
[n] K. Yamamoto et al., “New Injection Scheme of J-PARC Rapid Cycling Synchrotron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 579-581. doi:10.18429/JACoW-IPAC2017-MOPIK035
[n] S. Yu. Taskaev et al., “VITA Based Neutron Source - Status and Prospects”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRBCH04, pp. 230-232.
[n] C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-MEDSI2016-MOPE01
[n] Q. Luo, D. H. He, and B. Sun, “Design of Racetrack Cavity Beam Position Monitor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP058, pp. 4084-4086.
[n] W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1004-1009.
[n] Z. M. Dai, D. G. Li, Y. Xu, X. F. Zhao, and Z. Zhao, “Harmonic Operation of the SDUV HGHG-FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP021, pp. XX-XX.
[n] Y. Valdau, S. Mikirtytchiants, S. Trusov, L. Eltcov, and P. Wuestner, “Development of High Resolution Beam Current Measurement System for COSY-J??lich”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 434-437. doi:10.18429/JACoW-IBIC2016-TUPG41
[n] I. M. Kapchinskij, A. M. Kozodaev, N. V. Lazarev, and V. S. Skachkov, “Design and Development of Permanent Magnet Quadrupoles for Ion Linacs”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F07, pp. 350-351.
[n] M. Leitner, D. Leitner, A. Lemut, P. Vetter, and M. Wiescher, “DIANA" - a New”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-05, pp. -Deep-Underground-Accelerator-Facility-for-Astrophysics-Experiments".
[n] A. Mishin, D. Fischer, J. Roylance, M. Denney, and S. Proskin, “High power test results of diode E-Gun based 4-6 MeV Accelerator Beam Centerline (ABC)”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2104-2105. doi:10.18429/JACoW-IPAC2023-TUPL155
[n] T. A. Antaya, J. M. Moskalik, D. S. Sanderson, and Z. Q. Xie, “A Report on the Design and Performance of a Vertical, 2 6.4 GHz, Full Iron Yoke ECR Ion Source for the NSCL Superconducting Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-05, pp. 721-724.
[n] Y. P. Chong et al., “Optical Cerenkov Measurements of Emittance Growth in the Advanced Test Accelerator Beam under Laser Ion- Guiding”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1495-1498.
[n] R. A. Rimmer et al., “JLab High-Current CW Cryomodules for ERL and FEL Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS068, pp. 2493-2495.
[n] E. Theil, V. Jacobson, and V. Paxson, “The Impact of New Computer Technology on Accelerator Control”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 529-532.
[n] S. Yu. Taskaev et al., “Vacuum-insulation Tandem Accelerator for Boron Neutron Capture Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS079, pp. 3615-3617.
[n] K. Brand and J. P. Gourber, “A Magnetic Beam Positron Detector”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1812-1815.
[n] T. Karasawa et al., “Heavy Ion Acceleration in the IPCR 160cm Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E07, pp. XX-XX.
[n] S. Zhou, “A 90 MeV Electron Linac of IHEP”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-28, pp. 505-507.
[n] Y. Torun et al., “Final Commissioning of the MICE RF Module Prototype with Production Couplers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 474-476. doi:10.18429/JACoW-IPAC2016-MOPMW034
[n] G. Q. Xiao et al., “Status and Upgrade Project of HIRFL”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THA03, pp. 198-198.
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Clarke-Gayther, G. M. Allen, and A. I. Borden, “Global Beam Loss Monitoring using Long Ionisation Chambers at ISIS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1634-1637.
- Y. N. Rao, B. W. Wei, J. W. Xia, and Y. J. Yuan, “Lifetime of Ion Beam Stored in HIRFL-CSR”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper F-05, pp. 358-361.
- T. Tran-Ngoc, “Power Handling Capability of Water-Cooled Beam Stops”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-57, pp. 205-207.
- B. H. Smith, “High-Duty-Factor Conversion of the Berkeley Hilac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IX-04, pp. 467-470.
- K. S. Smith et al., “Progress on the SNS Ring LLRF Control System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB026, pp. 3344-3346.
- R. K. Agrawal et al., “Synchronous Ramping Scheme for SRS INDUS-2”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_017.
- N. Munemoto, S. Takano, K. Takayama, and I. Yamane, “Laser Ablation Ion Source for Highly Charge-State Ion Beams”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB19, pp. 234-237.
- G. H. Gillespie, B. W. Hill, and J. M. Moore, “Solving Complex Beamline Fitting and Optimization Problems with the Particle Beam Optics Lab PBO LabTM”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A10, pp. 1375-1377.
- K. Saifee, A. Chauhan, P. Fatnani, P. Gothwal, and C. P. Navathe, “Fast Data Acquisition System for Booster Supplies Readback”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD09, pp. 18-19.
- D. E. Kim et al., “Development of IVUN at Pohang Accelerator Laboratory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC115, pp. 2273-2275.
- N. Delerue et al., “Presentation of the Smith-Purcell Experiment at SOLEIL”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC37, pp. 460-463.
- F. G. G. Garcia and W. Pellico, “Current and Planned High Proton Flux Operations at the FNAL Booster”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3A04, pp. 378-380.
- K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
- R. Frankel and C. Salwen, “Advanced Concepts in Accelerator Timing Control”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1087-1090.
- S. Biri et al., “Application of the ATOMKI-ECRIS for Materials Research and Prospects of the Medical Utilization”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-C04, pp. 41-47.
- D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 607-609.
- J. Hao et al., “R&D of Niobium-Sputtered Copper QWR for Heavy Ion Linac in Peking University”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E206, pp. 304-308.
- L. J. Allen, “Operation and Improvements of the Fermilab 400MeV Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP03, pp. 329-331.
- B. W. Wei and J. W. Xia, “HIRFL-CSR Proposal”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper F-04, pp. 354-357.
- D. Gordo, R. Carrasco Dominguez, I. Martel, A. R. Pinto G??mez, and C. Gomez, “High-performance Accelerating Cryomodule for the LINCE Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3298-3300.
- F. Pellegrin and C. Rosenquist, “The ELT Linux Development Environment”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1125-1130.
- Y. Miyahara, “Computer Simulation of Stabilizing the Radiation Power of Storage Ring Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 879-882.
- E. Baron, L. Ah-Hot, and M. P. Bourgarel, “Injection and Stripping of a Heavy Ion Beam in the Orsay Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G07, pp. XX-XX.
- S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
- J. J. Zheng et al., “Applications of the Tune Measurement System of the HLS-II Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2892-2894.
- Z. Shen and Y. Wang, “Beam Diagnostic System of HIRFL”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-06, pp. 295-297.
- M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
- S. Stoynev, K. H. Riemer, and A. V. Zlobin, “Quench Training Analysis of Nb3Sn Accelerator Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 155-157.
- L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3890-3892.
- G. von Holtey and K. M. Potter, “Estimates of the Synchrotron Radiation Background in LEP Experiments”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1369-1372.
- V. V. Paramonov, L. V. Kravchuk, and V. A. Puntus, “The Cold Model of the CDS Structure”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4077, pp. 579-581.
- D. Schrage et al., “A 6.7 MeV CW RFQ Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W025, pp. 1093-1095.
- J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
- P. Chevtsov, V. Vrankovic, and Ch. S. Wouters, “Advanced Process Control Tool for Magnet Measurements at PSI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1934-1937.
- F. R. Osswald, “Seven Decades of Science with Accelerators at IPHC”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 104-107.
- V. M. Tsakanov, G. A. Amatuni, R. Brinkmann, and W. Decking, “Single Bunch Emittance Preservation in XFEL Linac”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG324, pp. XX-XX.
- K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 256-257.
- K. Yamamoto et al., “New Injection Scheme of J-PARC Rapid Cycling Synchrotron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 579-581.
- S. Yu. Taskaev et al., “VITA Based Neutron Source - Status and Prospects”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRBCH04, pp. 230-232.
- C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. XX-XX.
- Q. Luo, D. H. He, and B. Sun, “Design of Racetrack Cavity Beam Position Monitor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP058, pp. 4084-4086.
- W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1004-1009.
- Z. M. Dai, D. G. Li, Y. Xu, X. F. Zhao, and Z. Zhao, “Harmonic Operation of the SDUV HGHG-FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP021, pp. XX-XX.
- Y. Valdau, S. Mikirtytchiants, S. Trusov, L. Eltcov, and P. Wuestner, “Development of High Resolution Beam Current Measurement System for COSY-J??lich”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 434-437.
- I. M. Kapchinskij, A. M. Kozodaev, N. V. Lazarev, and V. S. Skachkov, “Design and Development of Permanent Magnet Quadrupoles for Ion Linacs”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper F07, pp. 350-351.
- M. Leitner, D. Leitner, A. Lemut, P. Vetter, and M. Wiescher, “DIANA" - a New”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-05, pp. -Deep-Underground-Accelerator-Facility-for-Astrophysics-Experiments".
- A. Mishin, D. Fischer, J. Roylance, M. Denney, and S. Proskin, “High power test results of diode E-Gun based 4-6 MeV Accelerator Beam Centerline (ABC)”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL155, pp. 2104-2105.
- T. A. Antaya, J. M. Moskalik, D. S. Sanderson, and Z. Q. Xie, “A Report on the Design and Performance of a Vertical, 2 6.4 GHz, Full Iron Yoke ECR Ion Source for the NSCL Superconducting Cyclotrons”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper M-05, pp. 721-724.
- Y. P. Chong et al., “Optical Cerenkov Measurements of Emittance Growth in the Advanced Test Accelerator Beam under Laser Ion- Guiding”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1495-1498.
- R. A. Rimmer et al., “JLab High-Current CW Cryomodules for ERL and FEL Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS068, pp. 2493-2495.
- E. Theil, V. Jacobson, and V. Paxson, “The Impact of New Computer Technology on Accelerator Control”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 529-532.
- S. Yu. Taskaev et al., “Vacuum-insulation Tandem Accelerator for Boron Neutron Capture Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS079, pp. 3615-3617.
- K. Brand and J. P. Gourber, “A Magnetic Beam Positron Detector”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1812-1815.
- T. Karasawa et al., “Heavy Ion Acceleration in the IPCR 160cm Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E07, pp. XX-XX.
- S. Zhou, “A 90 MeV Electron Linac of IHEP”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-28, pp. 505-507.
- Y. Torun et al., “Final Commissioning of the MICE RF Module Prototype with Production Couplers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 474-476.
- G. Q. Xiao et al., “Status and Upgrade Project of HIRFL”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THA03, pp. 198-198.
Back to search