JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. M. Ivanov and G. A. Riabov, “Experimental Determination of the External Beam Matrix on 1 GeV Synchrocyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-25, pp. 243-245. 
[n]	I. Verstovsek et al., “Abeans: Application Development Framework for Java”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE203, pp. XX-XX. 
[n]	I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524. 
[n]	S. Saadat and M. Boland, “Model of a dynamic orbit correction system based on neural network in CLS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2862-2865. doi:10.18429/JACoW-IPAC2023-WEPA094
[n]	J.-Y. Raguin, M. Bopp, A. Citterio, and A. Scherer, “The Swiss FEL RF Gun: RF Design and Thermal Analysis”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB01, pp. 442-444. 
[n]	R. Althaus et al., “Training of LBL-SSC Model Dipole Magnets at 1.8K”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1780-1783. 
[n]	C. S. Chen, K. T. Hsu, K. K. Lin, and T. S. Ueng, “Top-Up Mode Operation at SRRC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B20, pp. 1874-1876. 
[n]	F. Brinker et al., “ARI - A Storage Ring for Non-invasive Coronary Angiography”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B09, pp. 610-612. 
[n]	C. W. O. Ostenfeld, N. Hauge, and P. Ladefoged, “Standard Sextupole Magnets for NSLS-II Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME003, pp. 3517-3518. 
[n]	I. A. Morozov and P. A. Piminov, “Detection of Anomalies in BPM Signals at the VEPP-4M”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 420-422. doi:10.18429/JACoW-RuPAC2021-WEPSC40
[n]	J. L. Turner et al., “Trickle-charge: a New Operational Mode for PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT146, pp. 881-883. 
[n]	O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 685-688. 
[n]	T. Junquera et al., “High Intensity Linac Driver for the SPIRAL-2 Project : Design of Superconducting 88 MHz Quarter Wave Resonators (beta 0.12), Power Couplers and Cryomodules”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT058, pp. 1285-1287. 
[n]	S. V. Kutsaev et al., “A New Thermionic RF Electron Gun for Synchrotron Light Sources”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 453-456. doi:10.18429/JACoW-NAPAC2016-TUB3CO04
[n]	D. Hunt and G. Stover, “The Bevatron Liquid Nitrogen Circulation System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1622-1625. 
[n]	M. Wenskat et al., “Nitrogen Infusion R&D for CW Operation at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 652-657. doi:10.18429/JACoW-LINAC2018-TH2A01
[n]	J. L. Weil and I. J. Taylor, “A Source of He Ions for a Van de Graaff Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 257-262. 
[n]	Q. Kerns et al., “Energy Saver Prototype Accelerating Resonator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2782-2785. 
[n]	Y. Ivanyushenkov et al., “Development Status of a Magnetic Measurement System for the APS Superconducting Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP243, pp. 1286-1288. 
[n]	L. Stingelin et al., “High Power RF Systems and Resonators for Sector Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CIO01, pp. 332-337. 
[n]	G. Arduini et al., “Electron Cloud:  Observations with LHC-Type Beams in the SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B16, pp. 939-941. 
[n]	A. J. Nelson et al., “Achieving Microfocus of the 13.5-nm FLASH Beam for Exploring Matter Under Extreme Conditions”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROB01, pp. 784-788. 
[n]	Z. Wang, C. Feng, D. Huang, K. Q. Zhang, and M. Zhang, “Corrugated Structure as a Linearizer in High Repetition Rate X-Ray Free Electron Laser Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4485-4488. doi:10.18429/JACoW-IPAC2018-THPMK078
[n]	M. Brunken et al., “Latest Developments from the S-DALINAC and its Free-Electron-Laser”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4007, pp. 403-405. 
[n]	C. K. Baribeau, T. M. Pedersen, and M. J. Sigrist, “Virtual Shimming and Magnetic Measurements of two Long Period APPLE-II Undulators at the Canadian Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1679-1682. doi:10.18429/JACoW-IPAC2019-TUPRB003
[n]	H. L. Rutkowski et al., “The Berkeley 2MV Heavy Ion Fusion Injector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 959-962. 
[n]	A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-Band Technology and Cavity-Enhanced High Average Power Ultrafast Lasers”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 44-46. doi:10.18429/JACoW-LINAC2022-MOPOJO09
[n]	M. Tomohisa et al., “Status of TELL, TERAS and Niji's at the ETL”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D001, pp. 665-667. 
[n]	Y. Wang et al., “Understanding the beam quality requirement for high energy electron microscopy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2609-2612. doi:10.18429/JACoW-IPAC2023-WEODB3
[n]	A. Schempp et al., “Performance of the DESY RFQs”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 587-590. 
[n]	H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1845-1848. 
[n]	Y. Jiang et al., “Electron cyclotron resonance accelerator for industrial radiation processing”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS060, unpublished. 
[n]	A. Shemyakin et al., “Fermilab Electron Cooling Project: Field Measurements in the Cooling Section Solenoid”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB006, pp. 195-197. 
[n]	N. Holtkamp et al., “Longitudinal Beam Dynamics of the RWT-Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 676-679. 
[n]	C. H. Ho, W. K. Lau, J. I. Hwang, S. Y. Hsu, and Y. C. Liu, “The RF Gun Development at SRRC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB07, pp. 964-966. 
[n]	J. Serrano et al., “White Rabbit Status and Prospects”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCA02, pp. 1445-1448. 
[n]	W. C. Barkley, C. E. Buechler, J. T. M. Lyles, A. C. Naranjo, D. Baca, and R. E. Bratton, “Cooling Systems for the New 201.25 MHz Final Power Amplifiers at Los Alamos Neutron Science Center (LANSCE)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3479-3481. doi:10.18429/JACoW-IPAC2015-WEPTY084
[n]	J.-L. Vay, C. Benedetti, R. H. Cohen, A. Friedman, and D. P. Grote, “Some Computational Challenges in the Modeling of Accelerators and their Solutions in the Simulation Code Warp”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THP07, pp. 233-235. 
[n]	T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836. 
[n]	S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20. 
[n]	D. B. Belohrad, L. K. Jensen, O. R. Jones, M. Ludwig, and J.-J. Savioz, “The LHC Fast BCT System: A Comparison of Design Parameters with Initial Performance”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM051, pp. 269-273. 
[n]	T. Semba et al., “Design and Manufacture of Superconducting Magnet for the Wiggler in SAGA-LS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB038, pp. 358-360. 
[n]	V. R. Arsov, M. M. Dehler, S. Hunziker, M. G. Kaiser, and V. Schlott, “First Results from the Bunch Arrival-Time Monitor at the SwissFEL Test Injector”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOAL4, pp. 8-11. 
[n]	G. C. Pappas et al., “NLC Hybrid Solid State Induction Modulator”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP42, pp. 697-699. 
[n]	X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n]	G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806. 
[n]	Y. Hashimoto et al., “A Gas Sheet Beam Profile Monitor for the HIMAC Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI113, pp. 1900-1902. 
[n]	M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313. 
[n]	K. Togawa et al., “Production of High Intensity Polarized Electron Beam with Multi-Bunch Structure”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D054, pp. 214-216. 
[n]	P. Brunet and L. Burnod, “Status Report of the Orsay Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VIII-04, pp. 410-416. 
[n]	J. J. Sebek et al., “Frequent Fill Top-Off Injection at SPEAR3”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP217, pp. 2531-2533. 
[n]	M. Zach et al., “The H- High Intensity Beam Extraction System for TRIUMF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3042-3045. 
[n]	L. Du et al., “Beam Dynamics and Experiment of CPHS Linac”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO2LR02, pp. 355-359. 
[n]	T. Shibata et al., “Phase space measurements of 90 mA and 52.5 keV H⁻ ion beam at J-PARC frontend”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM082, unpublished. 
[n]	J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME043, pp. 568-570. 
[n]	A. H. Lumpkin, Y. L. Li, S. J. Pasky, and N. Sereno, “Observations on COTR Due to the Microbunching Instability in Compressed Beams”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC47, pp. 352-355. 
[n]	Z. Izaola et al., “Design of the Bilbao Accelerator Low Energy Extraction Lines”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP010, pp. 1519-1521. 
[n]	D. Boussard, T. Linnecar, and W. Scandale, “Recent Developments on Schottky Beam Diagnostics at the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1908-1911. 
[n]	J. A. Clarke, F. E. Hannon, D. J. Scott, B. J. A. Shepherd, and N. G. Wyles, “Commissioning of an APPLE-II Undulator at Daresbury Laboratory for the SRS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT079, pp. 4051-4053. 
[n]	M. Takagi et al., “Network-based Waveform Monitor for the J-PARC Accelerator Complex”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP565, pp. XX-XX. 
[n]	S. Belomestnykh, R. Kaplan, J. Reilly, J. Sikora, and V. Veshcherevich, “Using Passive Superconducting Cavities for Bunch Shortening in CESR”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB048, pp. 1306-1308. 
[n]	D. Tarazona, M. Berz, R. Hipple, K. Makino, and M. J. Syphers, “Muon Beam Tracking and Spin-Orbit Correlations for Precision g-2 Measurements”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3397-3399. doi:10.18429/JACoW-IPAC2016-THPMR006
[n]	M. Sapinski et al., “Measurements of the GSI Transfer Beam Lines Ion Optics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 131-134. doi:10.18429/JACoW-IPAC2019-MOPGW024
[n]	E. C. Longhi, A. I. Baldwin, S. P. Mhaskar, J. C. Schouten, and C. W. Thompson, “Overview of Diamond IDs for Phase 1”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS128, pp. 3586-3588. 
[n]	F. Naito, T. Ito, K. Nanmo, and C. Kubota, “Operation Experiences of the DTL/SDTL for the J-PARC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP068, pp. 566-568. 
[n]	W. P. Lutter, F. Schild, H. M. Thimmel, and P. Wucherer, “Beam Matching Problems Concerning the Axial Injection System for the Karlsruhe Cyclotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 321-326. 
[n]	Y. C. Chae and G. Decker, “Advanced Photon Source Insertion Device Field Quality and Multipole Error Specification”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR24, pp. 3409-3411. 
[n]	N. A. Mezentsev, S. V. Khrushchev, V. A. Shkaruba, V. M. Syrovatin, and V. M. Tsukanov, “Planar Superconducting Undulator With Neutral Poles”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 21-23. doi:10.18429/JACoW-RUPAC2016-TUCAMH01
[n]	J. R. Towler, T. Lefevre, M. Wendt, S. T. Boogert, A. Lyapin, and B. J. Fellenz, “Development and Test of High Resolution Cavity BPMs for the CLIC Main Beam Linac”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 474-478. doi:10.18429/JACoW-IBIC2015-TUPB060
[n]	M. Schaumann et al., “Proposal of a Girder Realignment Test in PETRA III”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1435-1438. doi:10.18429/JACoW-IPAC2022-TUPOMS015
[n]	S. Schlenker et al., “The ATLAS Detector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST02, pp. 5-8. 
[n]	J. W. Glenn, L. Repeta, J. N. Sandberg, G. A. Smith, and H. Weisberg, “AGS Slow Extraction Improvements”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3167-3170. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search