Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. V. Bylinskii, R. A. Baartman, K. Jayamanna, T. Planche, and Y.-N. Rao, “Recent Improvements in Beam Delivery with the TRIUMF's 500 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 133-136. doi:10.18429/JACoW-Cyclotrons2016-TUA04
[n] S. V. Kutsaev, R. B. Agustsson, A. V. Aleksandrov, A. C. Araujo Martinez, A. Moro, and K. V. Taletski, “Improved Multi-Dimensional Bunch Shape Monitor”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper THXD3, unpublished.
[n] C. Adolphsen et al., “A Multi-Moded RF Delay Line Distribution System for the Next Linear Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB01B, pp. 305-307.
[n] A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, L. Faillace, B. Spataro, and A. Valloni, “Simulations for the High Gradient, Low Emittance Supergun RF Photoinjector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP140, pp. 391-393.
[n] R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
[n] B. Mustapha, S. V. Kutsaev, and P. N. Ostroumov, “RF Design Optimization of a 176 MHz CW RFQ”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA05, pp. 990-992.
[n] R. M. Bodenstein et al., “Investigation of CLIC 380 GeV Post-Collision Line”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 528-531. doi:10.18429/JACoW-IPAC2019-MOPMP038
[n] A. Jansson, P. Lebrun, and R. Pasquinelli, “Experience with the 1.7 GHz Schottky Pick-ups in the Tevatron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT135, pp. 2777-2779.
[n] J. C. Garnier, L. Brarda, N. Neufeld, and F. Nikolaidis, “LHCb Online Log Analysis and Maintenance System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHAUST05, pp. 1228-1231.
[n] M. Munoz and D. B. Beltran, “Initial Design of a Global Fast Orbit Feedback System for the ALBA Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA23, pp. 561-563.
[n] Y. Yonemura et al., “Development of FFA at Center for Accelerator and Beam Applied Science of Kyushu University”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS052, unpublished.
[n] M. K. Craddock et al., “Properties of the TRIUMF Cyclotron Beam”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-06, pp. 240-244.
[n] L. Michelotti and J.-F. Ostiguy, “CHEF: An Interactive Program for Accelerator Optics Calculations”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT006, pp. 988-990.
[n] C. M. Celata, A. Faltens, D. L. Judd, L. Smith, and M. G. Tiefenback, “Transverse Combining of Nonrelativistic Beams in a Multiple Beam Induction Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1167-1170.
[n] B. Wu, L. Cao, Q. Fu, P. Tan, and Y. Q. Xiong, “Comparison of the Detection Performance of Three Nonlinear Crystals for the Electro-optic Sampling of a FEL-THz Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2891-2893. doi:10.18429/JACoW-IPAC2014-THPRO017
[n] P. Cameron et al., “PLL Tune Measurement during RHIC 2001”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI072, pp. 1855-1857.
[n] S. V. Alexeyenko, V. V. Kushin, S. V. Plotnikov, D. N. Seleznev, and V. P. Zubovsky, “Multiple Channel Measurements of Ion Beam Parameters”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU454, pp. 443-445.
[n] A. Chan, G. Crane, I. MacGregor, and S. Meyer, “Data Warehouse on the Web for Accelerator Fabrication and Maintenance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5C005, pp. 2413-2415.
[n] J. Zhuang, L. Hu, J. J. Li, L. Liao, Y. Qiu, and K. Zhou, “The Design for CSNS Instrument Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 895-899. doi:10.18429/JACoW-ICALEPCS2017-TUPHA196
[n] T. Worm and J. S. Nielsen, “An Update on ConSys Including a New LabVIEW FPGA Based LLRF System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCA04, pp. 97-99.
[n] Y. J. Lin, W.-K. Lau, M.-C. Chou, and W.-Y. Chiang, “Dark current reduction for NSRRC photoinjector system by collimator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2112-2115. doi:10.18429/JACoW-IPAC2024-WEPC63
[n] C. S. Simon et al., “Production Process for the European XFEL Re-Entrant Cavity BPM”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF05, pp. 307-310.
[n] S. Kozub et al., “Design and Tests of UNK Superconducting Correction Magnet Models”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2772-2775.
[n] Q. Luo and B. G. Sun, “Cavity-based Multi-parameter Beam Diagnostics at HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME040, pp. 559-561.
[n] A. Ushakov, S. Covrig, J. Grames, S. Habet, C. Le Galliard, and E. Voutier, “Evaluation of a high-power target design for positron production at CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3842-3844. doi:10.18429/JACoW-IPAC2023-WEPM120
[n] L. Hu et al., “Evaluating Live Migration Performance of a KVM-Based EPICS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC132, pp. 420-422.
[n] I. B. Barsukov, I. V. Chuvilo, V. V. Kushin, and S. V. Plotnikov, “Project of the Industrial Heavy Ion Linac for Particle Track Membranes (PTM) Production (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-18, pp. 740-742.
[n] S.-Y. Teng et al., “Design study of a THz SASE FEL at NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM034, unpublished.
[n] D. Anicic et al., “Replacement of Magnet Power Supplies, Control and Fieldbus for the PSI Cyclotron Accelerators”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP041, pp. XX-XX.
[n] H. Xu, Y.-C. Du, W.-H. Huang, R. K. Li, C.-X. Tang, and L. X. Yan, “A 3 MeV All Optical Terahertz-Driven Electron Source at Tsinghua University”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1294-1296. doi:10.18429/JACoW-IPAC2021-TUXB01
[n] F. Sohn, W. Ehsan, G. Giovanetti, D. Goeries, I. Karpics, and K. Sukharnikov, “Automatic Configuration of Motors at the European XFEL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1358-1361. doi:10.18429/JACoW-ICALEPCS2023-THPDP024
[n] M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Development of the Pulse Transformer for NLC Klystrom Pulse Modulator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P098, pp. 1322-1324.
[n] M. Omet et al., “LLRF Commissioning at the European XFEL”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 941-943. doi:10.18429/JACoW-SRF2017-FRXBA01
[n] J. C. Garnier et al., “Smooth Migration of CERN Post Mortem Service to a Horizontally Scalable Service”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 806-809. doi:10.18429/JACoW-ICALEPCS2015-WEPGF047
[n] M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Design of a PFN for the NLC Klystron Pulse Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D038, pp. 175-177.
[n] P. Cameron et al., “Schottky Measurements During RHIC 2000”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH030, pp. 1291-1293.
[n] S. Yue, Y. Dutheil, W. Bartmann, E. Johnson, and P. Martinek, “Hybrid on-axis and off-axis top-up injection at the future circular lepton collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2489-2492. doi:10.18429/JACoW-IPAC2024-WEPR13
[n] A. R. Jana and V. Kumar, “Design Studies for Medium and High beta SCRF Cavities for Indian Spallation Neutron Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP119, pp. 699-701.
[n] M. Bernard et al., “Secondary Emission Grids for Low and High Energy Electron Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP058L, pp. 1680-1682.
[n] J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Van Winkle, “Selecting RF Amplifiers for Impedance Controlled LLRF Systems - Nonlinear Effects and System Implications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS047, pp. 2451-2453.
[n] P. Cameron et al., “RHIC Third Generation PLL Tune System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB009, pp. 524-526.
[n] E. Gluskin and E. R. Moog, “Recent Advances in Insertion Devices”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE06, pp. 1301-1304.
[n] A. Bienenstock, “Invited Paper- Applications of Synchrotron Radiation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3780-3785.
For LaTeX
Use Complete Form
For BibTeX
References
- I. V. Bylinskii, R. A. Baartman, K. Jayamanna, T. Planche, and Y.-N. Rao, “Recent Improvements in Beam Delivery with the TRIUMF's 500 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 133-136.
- S. V. Kutsaev, R. B. Agustsson, A. V. Aleksandrov, A. C. Araujo Martinez, A. Moro, and K. V. Taletski, “Improved Multi-Dimensional Bunch Shape Monitor”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper THXD3, unpublished.
- C. Adolphsen et al., “A Multi-Moded RF Delay Line Distribution System for the Next Linear Collider”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB01B, pp. 305-307.
- A. D. Cahill, A. Fukasawa, J. B. Rosenzweig, L. Faillace, B. Spataro, and A. Valloni, “Simulations for the High Gradient, Low Emittance Supergun RF Photoinjector”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP140, pp. 391-393.
- R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302.
- B. Mustapha, S. V. Kutsaev, and P. N. Ostroumov, “RF Design Optimization of a 176 MHz CW RFQ”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA05, pp. 990-992.
- R. M. Bodenstein et al., “Investigation of CLIC 380 GeV Post-Collision Line”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 528-531.
- A. Jansson, P. Lebrun, and R. Pasquinelli, “Experience with the 1.7 GHz Schottky Pick-ups in the Tevatron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT135, pp. 2777-2779.
- J. C. Garnier, L. Brarda, N. Neufeld, and F. Nikolaidis, “LHCb Online Log Analysis and Maintenance System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHAUST05, pp. 1228-1231.
- M. Munoz and D. B. Beltran, “Initial Design of a Global Fast Orbit Feedback System for the ALBA Synchrotron”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA23, pp. 561-563.
- Y. Yonemura et al., “Development of FFA at Center for Accelerator and Beam Applied Science of Kyushu University”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS052, this conference.
- M. K. Craddock et al., “Properties of the TRIUMF Cyclotron Beam”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-06, pp. 240-244.
- L. Michelotti and J.-F. Ostiguy, “CHEF: An Interactive Program for Accelerator Optics Calculations”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT006, pp. 988-990.
- C. M. Celata, A. Faltens, D. L. Judd, L. Smith, and M. G. Tiefenback, “Transverse Combining of Nonrelativistic Beams in a Multiple Beam Induction Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1167-1170.
- B. Wu, L. Cao, Q. Fu, P. Tan, and Y. Q. Xiong, “Comparison of the Detection Performance of Three Nonlinear Crystals for the Electro-optic Sampling of a FEL-THz Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2891-2893.
- P. Cameron et al., “PLL Tune Measurement during RHIC 2001”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI072, pp. 1855-1857.
- S. V. Alexeyenko, V. V. Kushin, S. V. Plotnikov, D. N. Seleznev, and V. P. Zubovsky, “Multiple Channel Measurements of Ion Beam Parameters”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU454, pp. 443-445.
- A. Chan, G. Crane, I. MacGregor, and S. Meyer, “Data Warehouse on the Web for Accelerator Fabrication and Maintenance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5C005, pp. 2413-2415.
- J. Zhuang, L. Hu, J. J. Li, L. Liao, Y. Qiu, and K. Zhou, “The Design for CSNS Instrument Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 895-899.
- T. Worm and J. S. Nielsen, “An Update on ConSys Including a New LabVIEW FPGA Based LLRF System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCA04, pp. 97-99.
- Y. J. Lin, W.-K. Lau, M.-C. Chou, and W.-Y. Chiang, “Dark current reduction for NSRRC photoinjector system by collimator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC63, pp. 2112-2115.
- C. S. Simon et al., “Production Process for the European XFEL Re-Entrant Cavity BPM”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF05, pp. 307-310.
- S. Kozub et al., “Design and Tests of UNK Superconducting Correction Magnet Models”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2772-2775.
- Q. Luo and B. G. Sun, “Cavity-based Multi-parameter Beam Diagnostics at HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME040, pp. 559-561.
- A. Ushakov, S. Covrig, J. Grames, S. Habet, C. Le Galliard, and E. Voutier, “Evaluation of a high-power target design for positron production at CEBAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM120, pp. 3842-3844.
- L. Hu et al., “Evaluating Live Migration Performance of a KVM-Based EPICS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC132, pp. 420-422.
- I. B. Barsukov, I. V. Chuvilo, V. V. Kushin, and S. V. Plotnikov, “Project of the Industrial Heavy Ion Linac for Particle Track Membranes (PTM) Production (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-18, pp. 740-742.
- S.-Y. Teng et al., “Design study of a THz SASE FEL at NSRRC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM034, this conference.
- D. Anicic et al., “Replacement of Magnet Power Supplies, Control and Fieldbus for the PSI Cyclotron Accelerators”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP041, pp. XX-XX.
- H. Xu, Y.-C. Du, W.-H. Huang, R. K. Li, C.-X. Tang, and L. X. Yan, “A 3 MeV All Optical Terahertz-Driven Electron Source at Tsinghua University”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1294-1296.
- F. Sohn, W. Ehsan, G. Giovanetti, D. Goeries, I. Karpics, and K. Sukharnikov, “Automatic Configuration of Motors at the European XFEL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP024, pp. 1358-1361.
- M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Development of the Pulse Transformer for NLC Klystrom Pulse Modulator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P098, pp. 1322-1324.
- M. Omet et al., “LLRF Commissioning at the European XFEL”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 941-943.
- J. C. Garnier et al., “Smooth Migration of CERN Post Mortem Service to a Horizontally Scalable Service”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 806-809.
- M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Design of a PFN for the NLC Klystron Pulse Modulator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D038, pp. 175-177.
- P. Cameron et al., “Schottky Measurements During RHIC 2000”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH030, pp. 1291-1293.
- S. Yue, Y. Dutheil, W. Bartmann, E. Johnson, and P. Martinek, “Hybrid on-axis and off-axis top-up injection at the future circular lepton collider”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR13, pp. 2489-2492.
- A. R. Jana and V. Kumar, “Design Studies for Medium and High beta SCRF Cavities for Indian Spallation Neutron Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP119, pp. 699-701.
- M. Bernard et al., “Secondary Emission Grids for Low and High Energy Electron Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP058L, pp. 1680-1682.
- J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Van Winkle, “Selecting RF Amplifiers for Impedance Controlled LLRF Systems - Nonlinear Effects and System Implications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS047, pp. 2451-2453.
- P. Cameron et al., “RHIC Third Generation PLL Tune System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB009, pp. 524-526.
- E. Gluskin and E. R. Moog, “Recent Advances in Insertion Devices”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE06, pp. 1301-1304.
- A. Bienenstock, “Invited Paper- Applications of Synchrotron Radiation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3780-3785.
Back to search