Favourites
For Word
[n] D. Alesini et al., “Realization and High Power Tests of Damped C-Band Accelerating Structures for the ELI-NP Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 399-402. doi:10.18429/JACoW-IPAC2016-MOPMW004
[n] V. P. Derenchuk et al., “Performance of a CW RFQ Injector for the IUCF Cyclotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE051, pp. 3179-3181.
[n] M. Lieuvin, “SARA - Grenoble Status Report”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABC-06, pp. 81-88.
[n] K. Futatsukawa et al., “Upgrade of Power Supply System for RF-Chopper At J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI016, pp. 2735-2737.
[n] M. Borland, V. Sajaev, and Y. Sun, “A Seven-bend-achromat Lattice as a Potential Upgrade for the Advanced Photon Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO07, pp. 249-251.
[n] G. I. Batskikh, B. V. Bekhtev, V. A. Boiko, V. V. Elian, and A. V. Mishchenko, “Electron Accelerator for Transmutation of FIssion Products and Nuclear Fuel Cycle Actinides”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2601-2604.
[n] M. Jarosz, A. Jansson, J. C. Kazantzidis, T. J. Shea, and L. Tchelidze, “ESS Cold LINAC BLM Locations Determination”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1039-1041. doi:10.18429/JACoW-IPAC2015-MOPTY047
[n] A. Fukasawa, S. G. Anderson, H. Badakov, E. Hemsing, B. D. O, and J. B. Rosenzweig, “The FINDER Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS035, pp. 1260-1262.
[n] N. Sereno, M. Borland, and H. W. Friedsam, “An Energy Recovery Linac Upgrade for the Advanced Photon Source Located in the Storage Ring Infield”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN099, pp. 1145-1147.
[n] S. Li et al., “Adaptive Feedforward Control Design Based on Simulink for the J-PARC LINAC LLRF System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2187-2189. doi:10.18429/JACoW-IPAC2018-WEPAL017
[n] M. Hayes, R. W. Assmann, S. Fartoukh, and J. Wenninger, “The Influence of Time-Dependent Magnetic Field Errors on the Specifications of Feedback and Collimation Systems”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE044, pp. 1139-1141.
[n] A. Barisy et al., “A Transverse Beam Profile Monitor for p-pbar Studies in the CERN SPS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2180-2183.
[n] R. Appleby, R. J. Hall-Wilton, D. Macina, and V. Talanov, “Expected Performance of TOTEM BLMs at the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP031, pp. 3513-3515.
[n] V. Sajaev, M. Borland, and A. Xiao, “New Lattice Design for APS Storage Ring with Potential Tri-fold Increase of the Number of Insertion Devices”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN096, pp. 1139-1141.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Alesini et al., “Realization and High Power Tests of Damped C-Band Accelerating Structures for the ELI-NP Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 399-402.
- V. P. Derenchuk et al., “Performance of a CW RFQ Injector for the IUCF Cyclotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE051, pp. 3179-3181.
- M. Lieuvin, “SARA - Grenoble Status Report”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABC-06, pp. 81-88.
- K. Futatsukawa et al., “Upgrade of Power Supply System for RF-Chopper At J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI016, pp. 2735-2737.
- M. Borland, V. Sajaev, and Y. Sun, “A Seven-bend-achromat Lattice as a Potential Upgrade for the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO07, pp. 249-251.
- G. I. Batskikh, B. V. Bekhtev, V. A. Boiko, V. V. Elian, and A. V. Mishchenko, “Electron Accelerator for Transmutation of FIssion Products and Nuclear Fuel Cycle Actinides”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2601-2604.
- M. Jarosz, A. Jansson, J. C. Kazantzidis, T. J. Shea, and L. Tchelidze, “ESS Cold LINAC BLM Locations Determination”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1039-1041.
- A. Fukasawa, S. G. Anderson, H. Badakov, E. Hemsing, B. D. O, and J. B. Rosenzweig, “The FINDER Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS035, pp. 1260-1262.
- N. Sereno, M. Borland, and H. W. Friedsam, “An Energy Recovery Linac Upgrade for the Advanced Photon Source Located in the Storage Ring Infield”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN099, pp. 1145-1147.
- S. Li et al., “Adaptive Feedforward Control Design Based on Simulink for the J-PARC LINAC LLRF System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2187-2189.
- M. Hayes, R. W. Assmann, S. Fartoukh, and J. Wenninger, “The Influence of Time-Dependent Magnetic Field Errors on the Specifications of Feedback and Collimation Systems”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE044, pp. 1139-1141.
- A. Barisy et al., “A Transverse Beam Profile Monitor for p-pbar Studies in the CERN SPS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2180-2183.
- R. Appleby, R. J. Hall-Wilton, D. Macina, and V. Talanov, “Expected Performance of TOTEM BLMs at the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP031, pp. 3513-3515.
- V. Sajaev, M. Borland, and A. Xiao, “New Lattice Design for APS Storage Ring with Potential Tri-fold Increase of the Number of Insertion Devices”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN096, pp. 1139-1141.
Back to search
