JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. L. Martin, “The ACCTEK Proton Medical Accelerator and Beam Delivery System for Cancer Therapy and Radiography”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1802-1805. 
[n]	C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 413-419. doi:10.18429/JACoW-MEDSI2016-FRBA02
[n]	M. Incurvati, T. Margreiter, T. Riedler, and R. St?ñrz, “High Precision Four Quadrant Converter with GaN Technology”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2431-2434. doi:10.18429/JACoW-IPAC2021-TUPAB389
[n]	C. S. Park, J. F. Amundson, J. A. Johnstone, V. P. Nagaslaev, and S. J. Werkema, “Space Charge Effect of the High Intensity Proton Beam during the Resonance Extraction for the MU2E Experiment at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP092, pp. 1645-1647. 
[n]	G. Arduini, K. Cornelis, G. Ferioli, L. Jensen, and F. Zimmermann, “Transverse Instabilities of the LHC Proton Beam in the SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B02, pp. 341-343. 
[n]	Z. Xue, J. P. Dai, L. Cheng, and Y. Yang, “Preliminary Hardware Implementation of Compensation Mechanism of Superconducting Cavity Failure in C-ADS Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 953-955. doi:10.18429/JACoW-IPAC2015-MOPTY008
[n]	Y. S. Derbenev et al., “ELIC at CEBAF”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP015, pp. 1437-1439. 
[n]	C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-MEDSI2016-MOPE01
[n]	J.-P. Carneiro, S. U. Hansen, A. Ibrahim, V. D. Shiltsev, J. Steimel, and R. C. Webber, “First Results of a Digital Beam Phase Monitor at the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT015, pp. 1428-1430. 
[n]	J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567. 
[n]	H. Anamkath et al., “Design and Factory Test of the e+/e- Frascati Linear Accelerator for DAPhi;NE”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-64, pp. 213-215. 
[n]	R. Merl, F. Gallegos, C. Pillai, and F. Shelley, “High Speed Epics Data Acquisition and Processing on One VME Board”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB048, pp. 2518-2520. 
[n]	S. Schaller et al., “The LANSCE RICE Control System Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE013, pp. 2354-2356. 
[n]	P. F. Tavares et al., “Commissioning of the Max IV Light Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 439-444. doi:10.18429/JACoW-NAPAC2016-TUB3IO01
[n]	K. Shroff, G. Carcassi, and R. Lange, “Multi Channel Applications for Control System Studio (CSS)”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN015, pp. 271-273. 
[n]	H. Braun, H. Herminghaus, and A. Streun, “The Gun/Chopper System for the MAINZ Microtron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 997-1000. 
[n]	G. Horlitz, M. Clausen, H. Herzog, R. Lange, and H. Lierl, “The Cryogenic Operation of the Superconducting Magnet System in the HERA Proton Storage Ring: Cool Down, Steady State Operation, Quench Recovery Processes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2319-2322. 
[n]	L. Faillace et al., “High-power Tests and Initial Electron Beam Measurements of the New High-gradient Normal Conducting RF Photoinjector System for the Sincrotrone Trieste”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM27, pp. 694-696. 
[n]	H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX. 
[n]	D. Schneider et al., “Development of an Active Beam-Stabilization System for Electrofission Experiments at the S-Dalinac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 111-114. doi:10.18429/JACoW-IBIC2023-MOP038
[n]	D. Jia, Z. Xu, W. Chen, Y. Chu, C. Su, and Z. Wang, “Design of an E x B chopper based on permanent magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1446-1449. doi:10.18429/JACoW-IPAC2023-TUPA049
[n]	S.-Y. Lin, A.-Y. Chen, and C.-C. Liu, “Passive Radiation Detection Using TLD in NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS025, unpublished. 
[n]	G. Danby et al., “AGS Booster Prototype Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1422-1425. 
[n]	J. Flowerdew, H. Damerau, R. Heine, I. Karpov, and A. Lasheen, “Quadrupole pumping for bunch shortening in the Proton Synchrotron and Super Proton Synchrotron at CERN”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS028, unpublished. 
[n]	P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442. 
[n]	H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475. 
[n]	W. Lawson et al., “A High Peak Power, X-Band Gyroklystron for Linear Accelerators”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-50, pp. 166-168. 
[n]	D. W. Feldman et al., “Combined Thermionic and Photoelectric Emission from Dispenser Cathodes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH024, pp. 2132-2134. 
[n]	Y. Luo and Z. Y. Guo and C, “ANALYSIS OF THE ION INDUCED COUPLED BUNCH INSTABILITY OBSERVED IN BEPC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP051, pp. XX-XX. 
[n]	R. Koontz, T. McKinney, R. Miller, and A. Wilmunder, “SLAC Collider Injector, RF Drive Synchronization and Trigger Electronics and 15 Amp Thermionic Gun Development”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2213-2216. 
[n]	R. S. Sandha, S. C. Bapna, J. Dwivedi, V. C. Petwal, and H. C. Soni, “Prototype Beam Dump For 10 kW LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA087, pp. 764-766. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search