Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. D. Porter et al., “Next Generation Nb3Sn SRF Cavities for Linear Accelerators”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 462-465. doi:10.18429/JACoW-LINAC2018-TUPO055
[n] M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89.
[n] M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Development and Application of the Trigger Timing Watchdog System in KEK Electron/Positron Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME017, pp. 2962-2964.
[n] J. Serrano, “FPGA Technology in Instrumentation and Related Tools”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITTM02, pp. XX-XX.
[n] R. S. Amin et al., “A Preliminary Report from Louisiana State University CAMD Storage Ring Operating with an 11-pole 7.5 T Wiggler”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1682-1685. doi:10.18429/JACoW-IPAC2015-TUPJE034
[n] S. Deghaye, L. Bojtar, Y. Georgievskiy, and J. Serrano, “OASIS Status Report”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O4_007.
[n] P. Elleaume et al., “Upgrade of the ESRF Accelerator Complex”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC010, pp. 2004-2006.
[n] A. Bernhard et al., “Preparations for Beam Tests of a CLIC Damping Wiggler Prototype at ANKA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME005, pp. 1568-1570.
[n] J. M. Maxson, “Ultrafast Electron Diffraction at Cornell Using Low Emittance Photocathodes”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZE2, unpublished.
[n] R. Chasman, K. Batchelor, N. Fewell, and R. Witkover, “The Dependence of Transverse Emittance Growth on the Quadrupole Focussing Strength in the Brookhaven 200-MeV Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper B06, pp. 47-50.
[n] M. Satoh, K. Furukawa, T. Kudou, S. Kusano, and T. Suwada, “EPICS IOC of WindowsXP-based Oscilloscope for Fast BPM Data Acquisition System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP086, pp. 567-569.
[n] B. Bradu et al., “Compensation of Beam Induced Effects in LHC Cryogenic Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1205-1208. doi:10.18429/JACoW-IPAC2016-TUPMB048
[n] K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n] J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246.
[n] A. Caruso, A. Spart?á, and A. Longhitano, “Steps Forward In The Digital Rf Control System At Lns”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 476-478.
For LaTeX
Use Complete Form
For BibTeX
References
- R. D. Porter et al., “Next Generation Nb3Sn SRF Cavities for Linear Accelerators”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 462-465.
- M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89.
- M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Development and Application of the Trigger Timing Watchdog System in KEK Electron/Positron Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME017, pp. 2962-2964.
- J. Serrano, “FPGA Technology in Instrumentation and Related Tools”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITTM02, pp. XX-XX.
- R. S. Amin et al., “A Preliminary Report from Louisiana State University CAMD Storage Ring Operating with an 11-pole 7.5 T Wiggler”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1682-1685.
- S. Deghaye, L. Bojtar, Y. Georgievskiy, and J. Serrano, “OASIS Status Report”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O4_007.
- P. Elleaume et al., “Upgrade of the ESRF Accelerator Complex”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC010, pp. 2004-2006.
- A. Bernhard et al., “Preparations for Beam Tests of a CLIC Damping Wiggler Prototype at ANKA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME005, pp. 1568-1570.
- J. M. Maxson, “Ultrafast Electron Diffraction at Cornell Using Low Emittance Photocathodes”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEZE2, unpublished.
- R. Chasman, K. Batchelor, N. Fewell, and R. Witkover, “The Dependence of Transverse Emittance Growth on the Quadrupole Focussing Strength in the Brookhaven 200-MeV Linac”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper B06, pp. 47-50.
- M. Satoh, K. Furukawa, T. Kudou, S. Kusano, and T. Suwada, “EPICS IOC of WindowsXP-based Oscilloscope for Fast BPM Data Acquisition System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP086, pp. 567-569.
- B. Bradu et al., “Compensation of Beam Induced Effects in LHC Cryogenic Systems”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1205-1208.
- K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2541-2544.
- J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1243-1246.
- A. Caruso, A. Spart?á, and A. Longhitano, “Steps Forward In The Digital Rf Control System At Lns”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 476-478.
Back to search