Favourites
For Word
[n] Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 51-54. doi:10.18429/JACoW-SRF2019-MOP014
[n] J. Y. Yang, “DC high voltage electron gun development of the Dalian Advanced Light source pre-research project”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUIBA01, unpublished.
[n] K. Vodopivec, J. E. Breeding, and J. W. Sinclair, “The Linux Device Driver Framework for High-Throughput Lossless Data Streaming Applications”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 603. doi:10.18429/JACoW-ICALEPCS2019-MOPHA156
[n] R. Defavari et al., “Mechanical Design, Fabrication and Characterization of Electron Beam Position Monitors for Sirius”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2461-2464. doi:10.18429/JACoW-IPAC2021-TUPAB401
[n] G. Pile, T. Zinneman, and J. A. Carwardine, “Management of High Current Transients in the CWDD Injector 200kV Power System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3210-3213.
[n] S. V. Melanson, M. P. Dehnel, C. Hollinger, J. A. Martin, D. E. Potkins, and C. Philpott, “A PID Control Algorithm for Filament-Powered Volume-Cusp Ion Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2623-2624. doi:10.18429/JACoW-IPAC2016-WEPMY032
[n] K. Yoshimura, M. Aoki, Y. Hashimoto, and Y. Igarashi, “Measurements of Proton Beam Extinction of J-PARC MR Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP050, pp. 3564-3566.
[n] G. Blokesch, J. Friedl, A. Jankowiak, C. Piel, T. Weis, and K. Wille, “The Injector Linac of the DELTA-Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP135G, pp. 834-838.
[n] F. Long, Y. P. Liu, X. Qi, and Z. H. ZhenHua, “Conceptual Design for the HEPS Power Supply System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3540-3542. doi:10.18429/JACoW-IPAC2016-THPMW004
[n] K. Yonehara et al., “Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1275-1278. doi:10.18429/JACoW-NAPAC2016-FRA1CO05
[n] G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
[n] P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2530-2532. doi:10.18429/JACoW-IPAC2022-THPOST039
[n] Y. Kamiya et al., “Development of Shintake Beam Size Monitor for ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE022, pp. 1011-1013.
[n] G. Janser, G. Dzieglewski, W. Hugentobler, and F. Kreis, “Control System Hardware Upgrade”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC034, pp. 151-153.
[n] F. Schlie?ƒmann, M. Arnold, M. Dutine, and N. Pietralla, “Determination of the Momentum Spread While Running in the ERL Mode at the S-DALINAC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 300-303. doi:10.18429/JACoW-IBIC2019-TUPP009
[n] S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
[n] N. V. Avreline, “The Design of 1 MeV Proton LINAC Operating in CW”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3905-3907. doi:10.18429/JACoW-IPAC2018-THPAL113
[n] A. Yeremian, J. Adamski, W. Gallagher, R. Kennedy, J. Orthel, and L. Young, “Boeing 120 MeV RF Linac Injector Design and Accelerator Performance Comparison with PARMELA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 657-660.
[n] L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
[n] A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 358-360. doi:10.18429/JACoW-NAPAC2016-TUPOA36
[n] C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
[n] T. Lefevre, H.-H. Braun, E. Bravin, C. Dutriat, and C. P. Welsch, “Segmented Beam Dump for Time Resolved Spectrometry on a High Current Electron Beam”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC14, pp. 340-342.
[n] P. B. Larsen et al., “Intense Sheet Electron Beam Transport in a Periodically Cusped Magnetic Field”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP035, pp. 1558-1560.
[n] K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
[n] S. A. Glukhov and E. B. Levichev, “Realistic Approach for Beam Dynamics Simulation with Synchrotron Radiation in High Energy Circular Lepton Colliders”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 147-150. doi:10.18429/JACoW-ICAP2015-THCBC2
[n] K. Gross and J. Adamy, “Comparison of LLRF Control Approaches for High Intensity Hadron Synchrotrons: Design and Performance”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC076, pp. 3464-3466.
[n] M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
[n] B. Singh, R. Bartolini, R. T. Fielder, I. P. S. Martin, and J. Rowland, “Beam Dynamics Effect of Insertion Devices at Diamond Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE088, pp. 4731-4733.
[n] J. Norem, P. Bauer, J. Sebastian, and D. N. Seidman, “Atom Probe Tomography Studies of RF Materials”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAC008, pp. 612-614.
[n] J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323.
[n] P. Duval, J. Bobnar, I. Kriznar, T. Kusterle, M. Lomperski, and S. Weisse, “New ACOP Beans and TINE General Purpose Diagnostic Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP034, pp. 161-163.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 51-54.
- J. Y. Yang, “DC high voltage electron gun development of the Dalian Advanced Light source pre-research project”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUIBA01, unpublished.
- K. Vodopivec, J. E. Breeding, and J. W. Sinclair, “The Linux Device Driver Framework for High-Throughput Lossless Data Streaming Applications”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 603.
- R. Defavari et al., “Mechanical Design, Fabrication and Characterization of Electron Beam Position Monitors for Sirius”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2461-2464.
- G. Pile, T. Zinneman, and J. A. Carwardine, “Management of High Current Transients in the CWDD Injector 200kV Power System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3210-3213.
- S. V. Melanson, M. P. Dehnel, C. Hollinger, J. A. Martin, D. E. Potkins, and C. Philpott, “A PID Control Algorithm for Filament-Powered Volume-Cusp Ion Sources”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2623-2624.
- K. Yoshimura, M. Aoki, Y. Hashimoto, and Y. Igarashi, “Measurements of Proton Beam Extinction of J-PARC MR Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP050, pp. 3564-3566.
- G. Blokesch, J. Friedl, A. Jankowiak, C. Piel, T. Weis, and K. Wille, “The Injector Linac of the DELTA-Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP135G, pp. 834-838.
- F. Long, Y. P. Liu, X. Qi, and Z. H. ZhenHua, “Conceptual Design for the HEPS Power Supply System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3540-3542.
- K. Yonehara et al., “Progress of Gas-Filled Multi-RF-Cavity Beam Profile Monitor for Intense Neutrino Beams”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1275-1278.
- G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
- P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2530-2532.
- Y. Kamiya et al., “Development of Shintake Beam Size Monitor for ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE022, pp. 1011-1013.
- G. Janser, G. Dzieglewski, W. Hugentobler, and F. Kreis, “Control System Hardware Upgrade”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC034, pp. 151-153.
- F. Schlie?ƒmann, M. Arnold, M. Dutine, and N. Pietralla, “Determination of the Momentum Spread While Running in the ERL Mode at the S-DALINAC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 300-303.
- S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
- N. V. Avreline, “The Design of 1 MeV Proton LINAC Operating in CW”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3905-3907.
- A. Yeremian, J. Adamski, W. Gallagher, R. Kennedy, J. Orthel, and L. Young, “Boeing 120 MeV RF Linac Injector Design and Accelerator Performance Comparison with PARMELA”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 657-660.
- L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
- A. C. Watts, C. Johnstone, and J. A. Johnstone, “Computed Tomography of Transverse Phase Space”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 358-360.
- C. Steier et al., “Orbit Feedback Development at the ALS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI029, pp. 2103-2105.
- T. Lefevre, H.-H. Braun, E. Bravin, C. Dutriat, and C. P. Welsch, “Segmented Beam Dump for Time Resolved Spectrometry on a High Current Electron Beam”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC14, pp. 340-342.
- P. B. Larsen et al., “Intense Sheet Electron Beam Transport in a Periodically Cusped Magnetic Field”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP035, pp. 1558-1560.
- K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
- S. A. Glukhov and E. B. Levichev, “Realistic Approach for Beam Dynamics Simulation with Synchrotron Radiation in High Energy Circular Lepton Colliders”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 147-150.
- K. Gross and J. Adamy, “Comparison of LLRF Control Approaches for High Intensity Hadron Synchrotrons: Design and Performance”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC076, pp. 3464-3466.
- M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
- B. Singh, R. Bartolini, R. T. Fielder, I. P. S. Martin, and J. Rowland, “Beam Dynamics Effect of Insertion Devices at Diamond Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE088, pp. 4731-4733.
- J. Norem, P. Bauer, J. Sebastian, and D. N. Seidman, “Atom Probe Tomography Studies of RF Materials”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAC008, pp. 612-614.
- J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2320-2323.
- P. Duval, J. Bobnar, I. Kriznar, T. Kusterle, M. Lomperski, and S. Weisse, “New ACOP Beans and TINE General Purpose Diagnostic Applications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP034, pp. 161-163.
Back to search