Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. DiMonte, “Modernizing the RF control systems at the Advanced Photon Source”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 498-502. doi:10.18429/JACoW-ICALEPCS2025-TUPD001
[n] M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Uncertainty Quantification of Beam Parameters in a Linear Induction Accelerator Inferred from Bayesian Analysis of Solenoid Scans”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 34-36. doi:10.18429/JACoW-NAPAC2022-MOZD4
[n] M. Stirbet et al., “Fundamental Power Coupler Development for The SNS Superconducting Linac Cavities”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH455, pp. 728-730.
[n] L. Schrettner et al., “Control System Development and Integration at ELI-ALPS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 881. doi:10.18429/JACoW-ICALEPCS2019-WEBPP01
[n] T. Guillen Hernandez et al., “Numerical calculation of the Lorentz force detuning and the pressure sensitivity for the HL-LHC crab cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3003-3005. doi:10.18429/JACoW-IPAC2023-WEPA149
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, and H. Wang, “Eddy Current Calculations for a 1.495 GHz Injection-Locked Magnetron”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 198-200. doi:10.18429/JACoW-NAPAC2016-MOPOB58
[n] Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
[n] Y. Shoji, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and S. Suzuki, “Circulation of a Short, Intense Electron Bunch in the NewSUBARU Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH055, pp. 163-165.
[n] G. Penn, M. Reinsch, and J. Wurtele, “Analytic Model of Harmonic Generation in the Low-Gain FEL Regime”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS57, pp. XX-XX.
[n] D. Horan, L. Solita, D. Reigle, and N. Dimonte, “Design and Construction of the Advanced Photon Source 352-MHz RF System Switching Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P037, pp. 3690-3692.
[n] Y. Shoji, S. Hashimoto, A. Ando, N. Kumagai, H. Ohkuma, and M. Oishi, “Upgrading of a Vacuum System of the NewSUBARU Storage Ring : Design and Effect”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14007, pp. XX-XX.
[n] C. H. Kim, “Performance of the ALS Injection System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2036-2039.
[n] D. Golob, R. Kovacic, M. Pelko, M. Plesko, A. Podborsek, and M. Kobal, “Extended MicroIOC Family (LOCO)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB20, pp. 439-441.
[n] C. Benjamin, D. Seal, G. Stenning, J. Conlon, O. Malyshev, and R. Valizadeh, “V₃Si: an alternative thin film material for superconducting RF cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2779-2781. doi:10.18429/JACoW-IPAC2024-WEPS39
[n] Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
[n] M. Boege et al., “SLS Lattice Finalization and Magnet Girder Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP29G, pp. 644-646.
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3729-3731. doi:10.18429/JACoW-IPAC2018-THPAL040
[n] K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1513-1515. doi:10.18429/JACoW-IPAC2018-TUPMK011
[n] M. Popovic, A. Dudas, R. P. Johnson, A. Moretti, M. L. Neubauer, and R. Sah, “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB058, pp. 4005-4007.
[n] M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1394-1396. doi:10.18429/JACoW-IPAC2015-TUPWA002
[n] M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 258-260. doi:10.18429/JACoW-MEDSI2018-WEPH24
[n] G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
[n] F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1220-1223. doi:10.18429/JACoW-IPAC2024-TUPG02
[n] W. R. Rawnsley and R. E. Laxdal, “A Beam Current Monitor for the VECC Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF27, pp. 275-278.
[n] A. C. Paul, “Reconstruction of Initial Beam Conditions at the Exit of the DARHT II Accelerator”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB10, pp. 455-457.
[n] J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 243-246.
[n] C. Gough et al., “The SLS Booster Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
[n] J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
[n] S. A. Rastigeev et al., “RADIOCARBON MEASUREMENTS AND BACKGROUND INVESTIGATION AT SD RAS ACCELERATOR MASS SPECTROMETER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBAU03, pp. XX-XX.
[n] C. Barue et al., “CYCLONE44: a Radioactive Ion Beam Postaccelerator-Mass Separator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04F, pp. 544-546.
[n] N. Simos et al., “Effects of High Proton Fluences on CZT Detectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP018, pp. 3482-3484.
[n] S. Sievers et al., “Retreatment of European XFEL Series Cavities at DESY as Part of the Repair of European XFEL Accelerating Modules”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 384-387. doi:10.18429/JACoW-LINAC2018-TUPO028
[n] R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1916-1919.
[n] J. Q. Yang, Y. Bao, J. Y. Tang, and Y. Zou, “Study on the Collimation Method for a Future Proton-Proton Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1004-1007. doi:10.18429/JACoW-IPAC2018-TUPAK018
[n] R. Sah et al., “RF Breakdown Studies Using Pressurized Cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP046, pp. 184-186.
[n] C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
[n] S. Brandenburg, S. Kopecky, M. Versteegh, S. Gal?¿s, J. Guillot, and H. Laurent, “Acceleration of Low-Intensity Triton Beams with the AGOR Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-01, pp. XX-XX.
[n] T. Hodgetts et al., “Strongly tapered helical undulator system for FAST-GREENS installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1240-1242. doi:10.18429/JACoW-IPAC2023-MOPM112
[n] A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
[n] A. Nassiri, J. Carwardine, N. D. Arnold, T. Smith, A. E. Grelick, and N. Dimonte, “A High-Resolution S-band Down-Converting Digital Phase Detector for SASE FEL Use”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP48, pp. 715-717.
[n] X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n] N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 371-373. doi:10.18429/JACoW-MEDSI2018-THPH16
[n] L. David, E. Lecorche, C. Maugeais, and M. Ulrich, “Controlling the GANIL from an Operator Workstation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1800-1803.
[n] F. Ames et al., “Status of the ECRIS Charge State Breeding Project at TRIUMF”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper WECO-A02, pp. 183-183.
[n] I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
[n] S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 573-576.
[n] R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 427-429. doi:10.18429/JACoW-MEDSI2018-THPH43
[n] C. David, J. Jacob, J. Meyer, A. Panzarella, J.-L. Pons, and J.-L. Revol, “An Object Oriented Control System for the Third Storage Ring RF Unit at the ESRF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04C, pp. 1688-1690.
[n] B. van der Horst, M. Helmig, A. Matheisen, S. Saegebarth, and M. Schalwat, “Series Production of BQU at DESY for the EU-XFEL Module Assembly at CEA Saclay”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB104, pp. 865-868.
[n] Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
[n] T. Kuo et al., “Development of a 15 mA DC H Multicusp Source for Cyclotron Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-16, pp. 420-423.
[n] J. M. Peterson, K. L. Brown, and J. B. Truher, “Design Features and Operational Characteristics of the PEP Beam-Transport and Injection System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3059-3062.
[n] M. Leenen, “The Infrastructure for the TESLA Test Facility (TTF) - A Status Report”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2060-2063.
[n] S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
For LaTeX
Use Complete Form
For BibTeX
References
- N. DiMonte, “Modernizing the RF control systems at the Advanced Photon Source”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 498-502.
- M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Uncertainty Quantification of Beam Parameters in a Linear Induction Accelerator Inferred from Bayesian Analysis of Solenoid Scans”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 34-36.
- M. Stirbet et al., “Fundamental Power Coupler Development for The SNS Superconducting Linac Cavities”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH455, pp. 728-730.
- L. Schrettner et al., “Control System Development and Integration at ELI-ALPS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 881.
- T. Guillen Hernandez et al., “Numerical calculation of the Lorentz force detuning and the pressure sensitivity for the HL-LHC crab cavity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA149, pp. 3003-3005.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, and H. Wang, “Eddy Current Calculations for a 1.495 GHz Injection-Locked Magnetron”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 198-200.
- Y. Shoji, A. Ando, S. Hashimoto, N. Kumagai, H. Ohkuma, and M. Oishi, “Improvement of Beam Lifetime at the NewSUBARU Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14008, pp. XX-XX.
- Y. Shoji, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and S. Suzuki, “Circulation of a Short, Intense Electron Bunch in the NewSUBARU Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH055, pp. 163-165.
- G. Penn, M. Reinsch, and J. Wurtele, “Analytic Model of Harmonic Generation in the Low-Gain FEL Regime”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS57, pp. XX-XX.
- D. Horan, L. Solita, D. Reigle, and N. Dimonte, “Design and Construction of the Advanced Photon Source 352-MHz RF System Switching Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P037, pp. 3690-3692.
- Y. Shoji, S. Hashimoto, A. Ando, N. Kumagai, H. Ohkuma, and M. Oishi, “Upgrading of a Vacuum System of the NewSUBARU Storage Ring : Design and Effect”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14007, pp. XX-XX.
- C. H. Kim, “Performance of the ALS Injection System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2036-2039.
- D. Golob, R. Kovacic, M. Pelko, M. Plesko, A. Podborsek, and M. Kobal, “Extended MicroIOC Family (LOCO)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB20, pp. 439-441.
- C. Benjamin, D. Seal, G. Stenning, J. Conlon, O. Malyshev, and R. Valizadeh, “V₃Si: an alternative thin film material for superconducting RF cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS39, pp. 2779-2781.
- Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
- M. Boege et al., “SLS Lattice Finalization and Magnet Girder Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP29G, pp. 644-646.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3729-3731.
- K. Jayamanna, R. A. Baartman, Y. Bylinskii, T. Planche, M. Corwin, and R. N. Simpson, “Single Ring Permanent Magnet Lens”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1513-1515.
- M. Popovic, A. Dudas, R. P. Johnson, A. Moretti, M. L. Neubauer, and R. Sah, “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB058, pp. 4005-4007.
- M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1394-1396.
- M. Quispe, J. Campmany, A. A. Gevorgyan, and J. Marcos, “Design of an Integrated Crotch Absorber for ALBA Synchrotron Light Source”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 258-260.
- G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
- F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG02, pp. 1220-1223.
- W. R. Rawnsley and R. E. Laxdal, “A Beam Current Monitor for the VECC Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF27, pp. 275-278.
- A. C. Paul, “Reconstruction of Initial Beam Conditions at the Exit of the DARHT II Accelerator”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB10, pp. 455-457.
- J. Haimson and B. Mecklenburg, “Design and Construction of a Chopper Driven 11.4 GHz Traveling Wave RF Generator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 243-246.
- C. Gough et al., “The SLS Booster Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
- J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
- S. A. Rastigeev et al., “RADIOCARBON MEASUREMENTS AND BACKGROUND INVESTIGATION AT SD RAS ACCELERATOR MASS SPECTROMETER”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THBAU03, pp. XX-XX.
- C. Barue et al., “CYCLONE44: a Radioactive Ion Beam Postaccelerator-Mass Separator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP04F, pp. 544-546.
- N. Simos et al., “Effects of High Proton Fluences on CZT Detectors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP018, pp. 3482-3484.
- S. Sievers et al., “Retreatment of European XFEL Series Cavities at DESY as Part of the Repair of European XFEL Accelerating Modules”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 384-387.
- R. K. Cooper and G. P. Lawrence, “Beam Emittance Growth in a Proton Storage Ring Employing Charge Exchange Injection”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1916-1919.
- J. Q. Yang, Y. Bao, J. Y. Tang, and Y. Zou, “Study on the Collimation Method for a Future Proton-Proton Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1004-1007.
- R. Sah et al., “RF Breakdown Studies Using Pressurized Cavities”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP046, pp. 184-186.
- C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
- S. Brandenburg, S. Kopecky, M. Versteegh, S. Gal?¿s, J. Guillot, and H. Laurent, “Acceleration of Low-Intensity Triton Beams with the AGOR Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-01, pp. XX-XX.
- T. Hodgetts et al., “Strongly tapered helical undulator system for FAST-GREENS installation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM112, pp. 1240-1242.
- A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
- A. Nassiri, J. Carwardine, N. D. Arnold, T. Smith, A. E. Grelick, and N. Dimonte, “A High-Resolution S-band Down-Converting Digital Phase Detector for SASE FEL Use”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP48, pp. 715-717.
- X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4298-4300.
- N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 371-373.
- L. David, E. Lecorche, C. Maugeais, and M. Ulrich, “Controlling the GANIL from an Operator Workstation”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1800-1803.
- F. Ames et al., “Status of the ECRIS Charge State Breeding Project at TRIUMF”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper WECO-A02, pp. 183-183.
- I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142.
- S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 573-576.
- R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 427-429.
- C. David, J. Jacob, J. Meyer, A. Panzarella, J.-L. Pons, and J.-L. Revol, “An Object Oriented Control System for the Third Storage Ring RF Unit at the ESRF”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04C, pp. 1688-1690.
- B. van der Horst, M. Helmig, A. Matheisen, S. Saegebarth, and M. Schalwat, “Series Production of BQU at DESY for the EU-XFEL Module Assembly at CEA Saclay”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB104, pp. 865-868.
- Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
- T. Kuo et al., “Development of a 15 mA DC H Multicusp Source for Cyclotron Injection”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-16, pp. 420-423.
- J. M. Peterson, K. L. Brown, and J. B. Truher, “Design Features and Operational Characteristics of the PEP Beam-Transport and Injection System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3059-3062.
- M. Leenen, “The Infrastructure for the TESLA Test Facility (TTF) - A Status Report”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2060-2063.
- S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
Back to search