Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Farkhondeh et al., “Magnetic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2868-2871.
[n] M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5095-5098. doi:10.18429/JACoW-IPAC2023-THPM093
[n] J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 196-201. doi:10.18429/JACoW-IBIC2022-TU2T1
[n] A. Hanuka, “Accurate and Confident Prediction of Electron Beam Longitudinal Properties Using Spectral Virtual Diagnostics”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper TUIXGD1, unpublished.
[n] Z. Dong, Y. Tian, and Y. Sun, “Adaptive model-based reinforcement learning for orbit feedback control in NSLS-II storage ring”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1885-1892. doi:10.18429/JACoW-ICALEPCS2025-FRAG004
[n] A. I. Papash, G. A. Karamysheva, and L. M. Onischenko, “Compact Superconducting Synchrocyclotrons at Magnetic Field Level of up to 10 T for Proton and Carbon Therapy”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC037, pp. 393-395.
[n] W. H. Tan, P. Piot, and A. Zholents, “Start-to-End Simulation of the Drive-Beam Longitudinal Dynamics for Beam-Driven Wakefield Acceleration”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 858-861. doi:10.18429/JACoW-NAPAC2019-WEPLO06
[n] T. Konomi, “Overview on Worldwide Development of SRF-Gun Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THOTEV01, pp..
[n] E. Bulyak, “Ion Driven Effects in the Intence Electron Beam Circulating in Storage Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPA13, pp. 3226-3228.
[n] D. Wang, B. Binns, M. Kogan, and A. Zolfaghari, “Wire Setup Calibration of Beam Position Monitors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB04, pp. 2536-2538.
[n] A. Warner, K. Carlson, G. M. Kazakevich, L. R. Prost, and M. Sutherland, “Electron Beam Temperature Measurements at the Fermilab Medium Energy Electron Cooler”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB18, pp. 268-270.
[n] Y.-S. Kim et al., “AC Power Supply for Wobbler Magnet of the MC-50 Cyclotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE062, pp. 3576-3578.
[n] K. Okamura, H. Kamezaki, and K. Takayama, “Development of a Fast-feedback Deflector Magnet Power Supply for The Next Generation Heavy Ion Therapy”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7666, unpublished.
[n] F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Farkhondeh et al., “Magnetic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2868-2871.
- M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM093, pp. 5095-5098.
- J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 196-201.
- A. Hanuka, “Accurate and Confident Prediction of Electron Beam Longitudinal Properties Using Spectral Virtual Diagnostics”, presented at the 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, paper TUIXGD1, unpublished.
- Z. Dong, Y. Tian, and Y. Sun, “Adaptive model-based reinforcement learning for orbit feedback control in NSLS-II storage ring”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1885-1892.
- A. I. Papash, G. A. Karamysheva, and L. M. Onischenko, “Compact Superconducting Synchrocyclotrons at Magnetic Field Level of up to 10 T for Proton and Carbon Therapy”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC037, pp. 393-395.
- W. H. Tan, P. Piot, and A. Zholents, “Start-to-End Simulation of the Drive-Beam Longitudinal Dynamics for Beam-Driven Wakefield Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 858-861.
- T. Konomi, “Overview on Worldwide Development of SRF-Gun Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THOTEV01, pp..
- E. Bulyak, “Ion Driven Effects in the Intence Electron Beam Circulating in Storage Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPA13, pp. 3226-3228.
- D. Wang, B. Binns, M. Kogan, and A. Zolfaghari, “Wire Setup Calibration of Beam Position Monitors”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB04, pp. 2536-2538.
- A. Warner, K. Carlson, G. M. Kazakevich, L. R. Prost, and M. Sutherland, “Electron Beam Temperature Measurements at the Fermilab Medium Energy Electron Cooler”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB18, pp. 268-270.
- Y.-S. Kim et al., “AC Power Supply for Wobbler Magnet of the MC-50 Cyclotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE062, pp. 3576-3578.
- K. Okamura, H. Kamezaki, and K. Takayama, “Development of a Fast-feedback Deflector Magnet Power Supply for The Next Generation Heavy Ion Therapy”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7666, this conference.
- F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
Back to search