Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Schuett, U. Ratzinger, and M. Syha, “Progress of the Modulated 325 MHz Ladder RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 952-954. doi:10.18429/JACoW-IPAC2018-TUPAK001
[n] S. A. Whitehead, P. G. Barnes, G. M. Cross, S. J. Payne, and A. Pertica, “Multi-Channeltron Based Profile Monitor at the ISIS Proton Synchrotron”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM007, pp. 106-110.
[n] S. J. Pasky et al., “A New SLED Test Stand in the APS Injector Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP003, pp. 806-808.
[n] E. Zaplatin, R. Eichhorn, F. M. Esser, B. Laatsch, and R. Stassen, “COSY SC HWR Investigations”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP45, pp. 437-441.
[n] J. Staples et al., “A Wider?Âe Pre-Accelerator for the Superhilac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B05, pp. 81-85.
[n] N. Mueller, U. Bartz, M. Baschke, A. Schempp, and J. S. Schmidt, “Beam measurements at the Frankfurt Funneling Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD034, pp. 759-761.
[n] B. Parker et al., “A Review of Progress and Future Prospects for BNL Direct Wind Superconducting Magnet Technology”, in Proc. IPAC'20, Caen, France, May 2020, paper THYYPLS02, pp. XX-XX.
[n] O. Silveira and F. de Sá, “MENT algorithm for transverse phase space reconstruction at SIRIUS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM035, unpublished.
[n] M. Di Giacomo et al., “RF Commissioning of the SPIRAL2 RFQ in CW Mode and Beyond Nominal Field”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2804-2806. doi:10.18429/JACoW-IPAC2019-WEPRB007
[n] K.-H. Mebeta, “The Electrical Test of a Short String of Superconducting HERA Type Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1272-1275.
[n] A. Sitnikov, G. Kropachev, T. Kulevoy, D. N. Selesnev, and A. I. Semennikov, “The Tuning of RF Parameters of 40 MHz RFQ”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 139-141. doi:10.18429/JACoW-RuPAC2021-MOPSA04
[n] V. Musat, P. Burrows, S. Doebert, E. Granados, and A. Latina, “Photoinjector beam halo formation due to a secondary picosecond time-delayed laser pulse”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS010, unpublished.
[n] R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 515-516.
[n] M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710.
[n] A. Marchionni et al., “Performance of Antiproton Injection and Extraction Transfer Lines of the Recycler Ring at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB012, pp. 1649-1651.
[n] V. K. Bharadwaj, J. E. Griffin, D. J. Harding, and J. A. MacLachlan, “Beam Transfer from the Debuncher to the Stacking Orbit of the Accumulator Ring at Fermilab”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1025-1028.
[n] S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Schuett, U. Ratzinger, and M. Syha, “Progress of the Modulated 325 MHz Ladder RFQ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 952-954.
- S. A. Whitehead, P. G. Barnes, G. M. Cross, S. J. Payne, and A. Pertica, “Multi-Channeltron Based Profile Monitor at the ISIS Proton Synchrotron”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM007, pp. 106-110.
- S. J. Pasky et al., “A New SLED Test Stand in the APS Injector Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP003, pp. 806-808.
- E. Zaplatin, R. Eichhorn, F. M. Esser, B. Laatsch, and R. Stassen, “COSY SC HWR Investigations”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP45, pp. 437-441.
- J. Staples et al., “A Wider?Âe Pre-Accelerator for the Superhilac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B05, pp. 81-85.
- N. Mueller, U. Bartz, M. Baschke, A. Schempp, and J. S. Schmidt, “Beam measurements at the Frankfurt Funneling Experiment”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD034, pp. 759-761.
- B. Parker et al., “A Review of Progress and Future Prospects for BNL Direct Wind Superconducting Magnet Technology”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THYYPLS02, pp. XX-XX.
- O. Silveira and F. de Sá, “MENT algorithm for transverse phase space reconstruction at SIRIUS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM035, this conference.
- M. Di Giacomo et al., “RF Commissioning of the SPIRAL2 RFQ in CW Mode and Beyond Nominal Field”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2804-2806.
- K.-H. Mebeta, “The Electrical Test of a Short String of Superconducting HERA Type Magnets”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1272-1275.
- A. Sitnikov, G. Kropachev, T. Kulevoy, D. N. Selesnev, and A. I. Semennikov, “The Tuning of RF Parameters of 40 MHz RFQ”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 139-141.
- V. Musat, P. Burrows, S. Doebert, E. Granados, and A. Latina, “Photoinjector beam halo formation due to a secondary picosecond time-delayed laser pulse”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS010, this conference.
- R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 515-516.
- M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1707-1710.
- A. Marchionni et al., “Performance of Antiproton Injection and Extraction Transfer Lines of the Recycler Ring at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB012, pp. 1649-1651.
- V. K. Bharadwaj, J. E. Griffin, D. J. Harding, and J. A. MacLachlan, “Beam Transfer from the Debuncher to the Stacking Orbit of the Accumulator Ring at Fermilab”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1025-1028.
- S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
Back to search