Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. M. Pischalnikov et al., “Operation of an SRF Cavity Tuner Submerged into Liquid He”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 660-663. doi:10.18429/JACoW-SRF2019-TUP085
[n] P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX.
[n] G. Dutto et al., “Recent Progress at TRIUMF”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-03, pp. 342-346.
[n] C. Cao et al., “Probing Hot Spot and Cold Spot of SRF Cavities with Tunneling and Raman Spectroscopies”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP019, pp. 466-468.
[n] M. P. Kelly, D. J. Bice, S. M. Gerbick, and G. Wu, “Electropolishing at ANL/FNAL”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO066, pp. 765-768.
[n] M. A. Fraser et al., “Feasibility of Slow-Extracted High-Energy Ions From the CERN Proton Synchrotron for CHARM”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1703-1706. doi:10.18429/JACoW-IPAC2022-WEPOST012
[n] P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3195-3197. doi:10.18429/JACoW-IPAC2016-THOBB02
[n] J. Antony and R. Kumar, “Multichannel High Voltage Power Supply Controls Solution Using Compact Distributed Ethernet Based Boards and Qt Based GUI”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD15, pp. 169-171.
[n] G. Devanz et al., “ESS Elliptical Cavities and Cryomodules”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOC02, pp. 1218-1222.
[n] J. Sears, H. Padamsee, M. Tigner, K. Akai, J. Kirchgessner, and D. Moffat, “Development of Crab Cavity for CESR-B”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 769-772.
[n] S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
[n] H. Padamsee et al., “Design Challenges for High Current Storage Rings”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91C02, pp. XX-XX.
[n] D. Jeon et al., “The Laser Emittance Scanner for 1 GeV H- Beam”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP099, pp. 3684-3686.
[n] R. Worsham, D. A. Dohan, G. Dutto, K. Fong, R. Poirier, and G. Stanford, “Improved Reliability of the TRIUMF Resonator System through Installation of New Resonator Panels”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-07, pp. 353-356.
[n] H. J. Cha, Y. U. Jeong, B. C. Lee, and S.-H. Park, “FTIR Spectroscopy on Basic Materials in THz Region for Compact FEL-Based Imaging”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP061, pp. XX-XX.
[n] P. Oddo et al., “Dynamically Tuned High-Q AC-Dipole Implementation”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM070, pp. 338-340.
[n] E. Haebel and J. Kirchgessner, “Working Group 5B: Mechanical Considerations and Costs”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91I04, pp. XX-XX.
[n] R. Miyamoto et al., “First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1118-1121. doi:10.18429/JACoW-IPAC2019-MOPTS103
[n] B. Lorentz, A. Lehrach, R. Maier, D. Prasuhn, H. Stockhorst, and R. T?Âlle, “HESR Linear Lattice Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC112, pp. 325-327.
[n] D. Reggiani et al., “A Macro-Pulsed 1.2 MW Proton Beam for the PSI Ultra Cold Neutron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP086, pp. 1748-1750.
[n] R. C. Emery and E. F. Dorman, “Operational Status of the University of Washington Medical Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 351-352. doi:10.18429/JACoW-Cyclotrons2016-THP19
[n] R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 286-291.
[n] S. C. Duarte Pinto, O. R. Jones, L. Ropelewski, J. Spanggaard, and G. Tranquille, “Gas Electron Multipliers for the Antiproton Decelerator”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD63, pp. 449-451.
[n] L. D. Hansborough, J. M. Potter, and N. G. Wilson, “Mechanical Design of RFQ Resonator Cavities in the 400-MHz Frequency Range”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper I03, pp. 329-331.
[n] J. Bosser, K. Gnanvo, J. Spanggaard, and G. Tranquille, “New Beam Profile Monitor Based on GEM Detector for the AD Transfer and Experimental Lines”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT007, pp. 2472-2474.
[n] T. Tajima et al., “Q Disease: Insights from 350 MHz Spoke Cavities Tests and ERD Analyses of Hydrogen in Niobium”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP19, pp. 655-657.
[n] J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1687-1690. doi:10.18429/JACoW-IPAC2024-TUPS26
[n] R. Bossart, “Resonant Beam Position Monitor for Low Intensity Ion Beams”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 979-982.
[n] B. K. Stillwell et al., “Conceptual Design and Analysis of a Storage Ring Beam Position Monitor for the APS Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1170-1172. doi:10.18429/JACoW-IPAC2015-MOPWI012
[n] J. Martin, “Beam Detector Impedance Calculation Using Circuit Models”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1127-1130.
[n] S. J. Lee et al., “PAL-XFEL Cavity BPM Prototype Beam Test at ITF”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 468-470. doi:10.18429/JACoW-FEL2015-TUP043
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, and J. Chen, “A Success-History Based Learning Procedure to Optimize Server Throughput in Large Distributed Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1182-1189. doi:10.18429/JACoW-ICALEPCS2017-THCPL03
[n] P. Junior, H. Deitinghoff, K. D. Halfmann, W. Neumann, and N. Zoubek, “Design Considerations on Peak Electrical Fields and Maximum Beam Currents for Heavy Ion RFQ Linacs”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2639-2642.
[n] A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
[n] S. Matsuba, K. Harada, M. Katoh, K. Kawase, and K. S. Shimada, “Design Study of an Electron Storage Ring for the Future Plan of Hiroshima Synchrotron Radiation Center.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 200-202. doi:10.18429/JACoW-IPAC2019-MOPGW048
[n] J. C. Sheppard, J. E. Clendenin, M. B. James, R. H. Miller, and M. C. Ross, “Real Time Bunch Length Measurements in the SLC Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2006-2009.
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1148-1151.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. M. Pischalnikov et al., “Operation of an SRF Cavity Tuner Submerged into Liquid He”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 660-663.
- P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX.
- G. Dutto et al., “Recent Progress at TRIUMF”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-03, pp. 342-346.
- C. Cao et al., “Probing Hot Spot and Cold Spot of SRF Cavities with Tunneling and Raman Spectroscopies”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP019, pp. 466-468.
- M. P. Kelly, D. J. Bice, S. M. Gerbick, and G. Wu, “Electropolishing at ANL/FNAL”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO066, pp. 765-768.
- M. A. Fraser et al., “Feasibility of Slow-Extracted High-Energy Ions From the CERN Proton Synchrotron for CHARM”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1703-1706.
- P. N. Koufalis et al., “Impurity Doping of Superconducting Radio Frequency Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3195-3197.
- J. Antony and R. Kumar, “Multichannel High Voltage Power Supply Controls Solution Using Compact Distributed Ethernet Based Boards and Qt Based GUI”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD15, pp. 169-171.
- G. Devanz et al., “ESS Elliptical Cavities and Cryomodules”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOC02, pp. 1218-1222.
- J. Sears, H. Padamsee, M. Tigner, K. Akai, J. Kirchgessner, and D. Moffat, “Development of Crab Cavity for CESR-B”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 769-772.
- S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
- H. Padamsee et al., “Design Challenges for High Current Storage Rings”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91C02, pp. XX-XX.
- D. Jeon et al., “The Laser Emittance Scanner for 1 GeV H- Beam”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP099, pp. 3684-3686.
- R. Worsham, D. A. Dohan, G. Dutto, K. Fong, R. Poirier, and G. Stanford, “Improved Reliability of the TRIUMF Resonator System through Installation of New Resonator Panels”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-07, pp. 353-356.
- H. J. Cha, Y. U. Jeong, B. C. Lee, and S.-H. Park, “FTIR Spectroscopy on Basic Materials in THz Region for Compact FEL-Based Imaging”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP061, pp. XX-XX.
- P. Oddo et al., “Dynamically Tuned High-Q AC-Dipole Implementation”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM070, pp. 338-340.
- E. Haebel and J. Kirchgessner, “Working Group 5B: Mechanical Considerations and Costs”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91I04, pp. XX-XX.
- R. Miyamoto et al., “First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1118-1121.
- B. Lorentz, A. Lehrach, R. Maier, D. Prasuhn, H. Stockhorst, and R. T?Âlle, “HESR Linear Lattice Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC112, pp. 325-327.
- D. Reggiani et al., “A Macro-Pulsed 1.2 MW Proton Beam for the PSI Ultra Cold Neutron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP086, pp. 1748-1750.
- R. C. Emery and E. F. Dorman, “Operational Status of the University of Washington Medical Cyclotron Facility”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 351-352.
- R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 286-291.
- S. C. Duarte Pinto, O. R. Jones, L. Ropelewski, J. Spanggaard, and G. Tranquille, “Gas Electron Multipliers for the Antiproton Decelerator”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD63, pp. 449-451.
- L. D. Hansborough, J. M. Potter, and N. G. Wilson, “Mechanical Design of RFQ Resonator Cavities in the 400-MHz Frequency Range”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper I03, pp. 329-331.
- J. Bosser, K. Gnanvo, J. Spanggaard, and G. Tranquille, “New Beam Profile Monitor Based on GEM Detector for the AD Transfer and Experimental Lines”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT007, pp. 2472-2474.
- T. Tajima et al., “Q Disease: Insights from 350 MHz Spoke Cavities Tests and ERD Analyses of Hydrogen in Niobium”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP19, pp. 655-657.
- J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS26, pp. 1687-1690.
- R. Bossart, “Resonant Beam Position Monitor for Low Intensity Ion Beams”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 979-982.
- B. K. Stillwell et al., “Conceptual Design and Analysis of a Storage Ring Beam Position Monitor for the APS Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1170-1172.
- J. Martin, “Beam Detector Impedance Calculation Using Circuit Models”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1127-1130.
- S. J. Lee et al., “PAL-XFEL Cavity BPM Prototype Beam Test at ITF”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 468-470.
- Y. Gao, T. G. Robertazzi, K. A. Brown, and J. Chen, “A Success-History Based Learning Procedure to Optimize Server Throughput in Large Distributed Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1182-1189.
- P. Junior, H. Deitinghoff, K. D. Halfmann, W. Neumann, and N. Zoubek, “Design Considerations on Peak Electrical Fields and Maximum Beam Currents for Heavy Ion RFQ Linacs”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2639-2642.
- A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
- S. Matsuba, K. Harada, M. Katoh, K. Kawase, and K. S. Shimada, “Design Study of an Electron Storage Ring for the Future Plan of Hiroshima Synchrotron Radiation Center.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 200-202.
- J. C. Sheppard, J. E. Clendenin, M. B. James, R. H. Miller, and M. C. Ross, “Real Time Bunch Length Measurements in the SLC Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2006-2009.
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1148-1151.
Back to search