Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Favourites
For Word
[n] K. Akai et al., “Commissioning of the KEKB RF System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A07, pp. 1939-1941.
[n] G. K. Sahoo, K. Balewski, H. Ehrlichmann, J. Keil, and R. Wanzenberg, “Dispersion and Beam Optic Parameter Measurements in the Transport Line (E-Weg) from DESY II to PETRA III”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 692-694. doi:10.18429/JACoW-IPAC2017-MOPIK071
[n] J. D. Gilpatrick, H. Marquez, J. Power, and V. Yuan, “Design and Operation of a Bunched-Beam, Phase-Spread Measurement”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-23, pp. 359-361.
[n] P. V. Tyagi et al., “Effect of Current Densities on Sulfur Generation at Electropolished Niobium Surface”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC092, pp. 292-294.
[n] M. Kuriki, L. Guo, M. Urano, A. Yokota, K. Negishi, and Y. Seimiya, “Substrate Dependence of CsK2Sb Cathode Performance”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1443-1445. doi:10.18429/JACoW-IPAC2017-TUPAB051
[n] T. Naito et al., “Damping Wiggler Study at KEK-ATF”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE044, pp. 2809-2811.
[n] W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 258-262. doi:10.18429/JACoW-Cyclotrons2016-WEB01
[n] L. Søby et al., “Elena Orbit and Schottky Measurement Systems”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1061-1064. doi:10.18429/JACoW-IPAC2015-MOPTY056
[n] J. T. Urban, L. J. Fields, and D. Sagan, “Linear Accelerator Simulations with BMAD”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP026, pp. 1937-1939.
[n] F. Curbis et al., “Seeded Coherent Harmonic Generation with in-line Gas Target”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD15, pp. 265-267.
[n] Z. C. Chen, Y. B. Leng, Y. Xiong, and W. M. Zhou, “Modeling and Performance Evaluation of DCCTs in SSRF”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB03, pp. 16-19.
[n] C. E. Peters, J. Reyna, and D. Stanton, “Asynchronous Driver Evaluation and Development for Digital Systems at the Argonne Tandem Linear Accelerating System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1372. doi:10.18429/JACoW-ICALEPCS2019-WEPHA119
[n] B. Feinberg, M. I. Green, K. Halbach, G. Koehler, and J. Tanabe, “Adjustable Rare Earth Quadrupole Drift Tube Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1419-1422.
[n] K. Beckert et al., “Operation of the ESR at Transition Energy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP03A, pp. 511-513.
[n] R. Müller et al., “Orbit Drift Correction Using Correctors with Ultra-High DAC Resolution”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH301, pp. 1180-1182.
[n] A. Sitnikov et al., “Effect of Tin Ion Implantation on the Properties of Amorphous Ge2Sb2Te5 Thin Films”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 230-232. doi:10.18429/JACoW-RUPAC2018-TUPSA41
[n] R. Stassen, R. Eichhorn, F. M. Esser, and H. Singer, “Superconducting RF Activities at FZ-Juelich”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO006, pp. 185-187.
[n] J. H. Shao, H. B. Chen, Y.-C. Du, Q. X. Jin, J. Shi, and H. Zha, “High Power Test of a C-band 6 MeV Standing-wave Linear Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA018, pp. 3666-3668.
[n] J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
[n] F. V. Podgorny, B. I. Grishanov, and A. S. Kasaev, “SOS-diode Based Pulser for the Injection System of the Collider VEPP-2000”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT089, pp. 743-745.
[n] B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
[n] D. Z. Cao et al., “Electromagnetic and Mechanical Design of High Gradient S-Band Accelerator in TTX”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4876-4878. doi:10.18429/JACoW-IPAC2018-THPML092
[n] F. J. Jia et al., “Beam Dynamics Design of a 325 MHz RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA022, pp. 1772-1774.
[n] L. Yang, X. Liu, Y. Q. Xiong, J. Yang, and T. Yu, “Study on Eddy Current Power Losses in Insulated Core Transformer Primary Coil”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD053, pp. 3632-3634.
[n] R. K. Jobe, M. J. Browne, and K. P. Slattery, “Hardware Upgrade for Klystrons in the SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2107-2110.
[n] C. P. Welsch, T. Cybulski, A. Jeff, V. Tzoganis, and H. D. Zhang, “Non-invasive Beam Profile Monitoring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 537-539. doi:10.18429/JACoW-IPAC2015-MOPMA005
[n] R. W. Assmann et al., “The Final Collimation System for the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUODFI01, pp. 986-988.
[n] R. J. Briggs, D. L. Birx, D. S. Prono, D. Prosnitz, and L. L. Reginato, “Induction Linac-Based FELs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 178-183.
[n] G. Trad, E. Bravin, A. Goldblatt, S. Mazzoni, F. Roncarolo, and T. M. Mitsuhashi, “Performance of the Upgraded Synchrotron Radiation Diagnostics at the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 306-309. doi:10.18429/JACoW-IPAC2016-MOPMR030
For LaTeX
Use Complete Form
For BibTeX
References
- K. Akai et al., “Commissioning of the KEKB RF System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A07, pp. 1939-1941.
- G. K. Sahoo, K. Balewski, H. Ehrlichmann, J. Keil, and R. Wanzenberg, “Dispersion and Beam Optic Parameter Measurements in the Transport Line (E-Weg) from DESY II to PETRA III”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 692-694.
- J. D. Gilpatrick, H. Marquez, J. Power, and V. Yuan, “Design and Operation of a Bunched-Beam, Phase-Spread Measurement”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-23, pp. 359-361.
- P. V. Tyagi et al., “Effect of Current Densities on Sulfur Generation at Electropolished Niobium Surface”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC092, pp. 292-294.
- M. Kuriki, L. Guo, M. Urano, A. Yokota, K. Negishi, and Y. Seimiya, “Substrate Dependence of CsK2Sb Cathode Performance”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1443-1445.
- T. Naito et al., “Damping Wiggler Study at KEK-ATF”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE044, pp. 2809-2811.
- W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 258-262.
- L. Søby et al., “Elena Orbit and Schottky Measurement Systems”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1061-1064.
- J. T. Urban, L. J. Fields, and D. Sagan, “Linear Accelerator Simulations with BMAD”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP026, pp. 1937-1939.
- F. Curbis et al., “Seeded Coherent Harmonic Generation with in-line Gas Target”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD15, pp. 265-267.
- Z. C. Chen, Y. B. Leng, Y. Xiong, and W. M. Zhou, “Modeling and Performance Evaluation of DCCTs in SSRF”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOCB03, pp. 16-19.
- C. E. Peters, J. Reyna, and D. Stanton, “Asynchronous Driver Evaluation and Development for Digital Systems at the Argonne Tandem Linear Accelerating System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1372.
- B. Feinberg, M. I. Green, K. Halbach, G. Koehler, and J. Tanabe, “Adjustable Rare Earth Quadrupole Drift Tube Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1419-1422.
- K. Beckert et al., “Operation of the ESR at Transition Energy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP03A, pp. 511-513.
- R. Müller et al., “Orbit Drift Correction Using Correctors with Ultra-High DAC Resolution”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH301, pp. 1180-1182.
- A. Sitnikov et al., “Effect of Tin Ion Implantation on the Properties of Amorphous Ge2Sb2Te5 Thin Films”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 230-232.
- R. Stassen, R. Eichhorn, F. M. Esser, and H. Singer, “Superconducting RF Activities at FZ-Juelich”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO006, pp. 185-187.
- J. H. Shao, H. B. Chen, Y.-C. Du, Q. X. Jin, J. Shi, and H. Zha, “High Power Test of a C-band 6 MeV Standing-wave Linear Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA018, pp. 3666-3668.
- J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
- F. V. Podgorny, B. I. Grishanov, and A. S. Kasaev, “SOS-diode Based Pulser for the Injection System of the Collider VEPP-2000”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT089, pp. 743-745.
- B. Quinn et al., “Design and Testing of a Fast Beam Position Monitor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB073, pp. 2571-2573.
- D. Z. Cao et al., “Electromagnetic and Mechanical Design of High Gradient S-Band Accelerator in TTX”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4876-4878.
- F. J. Jia et al., “Beam Dynamics Design of a 325 MHz RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA022, pp. 1772-1774.
- L. Yang, X. Liu, Y. Q. Xiong, J. Yang, and T. Yu, “Study on Eddy Current Power Losses in Insulated Core Transformer Primary Coil”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD053, pp. 3632-3634.
- R. K. Jobe, M. J. Browne, and K. P. Slattery, “Hardware Upgrade for Klystrons in the SLC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2107-2110.
- C. P. Welsch, T. Cybulski, A. Jeff, V. Tzoganis, and H. D. Zhang, “Non-invasive Beam Profile Monitoring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 537-539.
- R. W. Assmann et al., “The Final Collimation System for the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUODFI01, pp. 986-988.
- R. J. Briggs, D. L. Birx, D. S. Prono, D. Prosnitz, and L. L. Reginato, “Induction Linac-Based FELs”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 178-183.
- G. Trad, E. Bravin, A. Goldblatt, S. Mazzoni, F. Roncarolo, and T. M. Mitsuhashi, “Performance of the Upgraded Synchrotron Radiation Diagnostics at the LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 306-309.
Back to search