Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. J. Lamm et al., “A New Facility to Test Superconducting Accelerator Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P003, pp. 3395-3397.
[n] Y. W. Kang et al., “Design and High Power Processing of RFQ Input Power Couplers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS074, pp. 2505-2507.
[n] N. Li et al., “SPEAR3 Gradient Dipole Core Fabrication”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB061, pp. 2174-2176.
[n] L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
[n] W. W. Li, Z. G. He, Q. K. Jia, S. M. Jiang, L. Wang, and D. He, “Numerical Method for Longitudinal Dynamics of a Terahertz Cherenkov Free Electron Laser Driven by a Mev Picosecond Electron Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4614-4616. doi:10.18429/JACoW-IPAC2018-THPMK126
[n] M. Walter et al., “Alignment of Components at the University of Maryland Electron Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB075, pp. 2577-2579.
[n] R. R. Geraldes et al., “The Status of the New High-Dynamic DCM for Sirius”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 147-152. doi:10.18429/JACoW-MEDSI2018-WEOAMA01
[n] Cz. Golkowski, J. D. Ivers, J. A. Nation, P. Wang, and L. Schachter, “First Results from a High Power Ka Band TWT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA89, pp. 3603-3605.
[n] W. Xu et al., “RF and Mechanical Design of 647 MHz 5-Cell BNL4 Cavity for eRHIC ERL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2364-2366. doi:10.18429/JACoW-IPAC2016-WEPMR041
[n] A. V. Tollestrup, “Progress in Superconducting Magnet Technology for Accelerators/Storage Rings”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3198-3200.
[n] A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
[n] T. J. Shea et al., “SNS Accelerator Diagnostics: Progress and Challenges”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB001, pp. 512-516.
[n] J. P. Carneiro et al., “Beam Transport, Acceleration and Compression Studies in the Fermilab High-Brightness Photoinjector”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4049, pp. 878-880.
[n] D. Cheng et al., “Status of the PEP-II Low-Energy Ring Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P014, pp. 3619-3621.
[n] A. M. Porcellato et al., “Research and Development in the Field of SCRF at INFN-LNL”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP006, pp. 50-53.
[n] J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3908-3911. doi:10.18429/JACoW-IPAC2019-THPRB043
[n] G. Arduini et al., “The LHC Proton Beam in the CERN SPS: an Update”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB050, pp. 1718-1720.
[n] E. P. Chojnacki, R. D. Ehrlich, M. Liepe, J. Sears, and E. N. Smith, “DC Conductivity of RF Absorbing Materials”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO035, pp. 643-647.
[n] J. S. Berg and R. Palmer, “Cost Optimization of Non-Scaling FFAG Lattices for Muon Acceleration”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT158, pp. 902-904.
[n] S. Y. Zhang, “Thyristor Converter Simulation and Analysis”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1005-1008.
[n] D. Proch, “RF Superconductivity, A Status Review”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU1-03, pp. 216-220.
[n] M. Li, “Experience with Moving from DPA to Changes in Material Properties”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B05, pp. 468-471.
[n] W. Fischer et al., “eRHIC in Electron-Ion Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 738-741. doi:10.18429/JACoW-IPAC2019-MOPRB072
[n] M. A. Nozdrin et al., “Hollow Photocathode Prototype for e-Gun”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD84, pp. 242-244.
[n] X. Lu, S. W. Quan, and K. Zhao, “The Drive Laser System for DC-SC Injector”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS35, pp. XX-XX.
[n] W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596.
[n] J. Petter, J. Marriner, and J. McCarthy, “Transverse Beam Dampers for the FNAL Antiproton Rings”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 791-794.
[n] Y. H. Wu, D. Kayran, V. Litvinenko, and I. Pinayev, “Beam Dynamics Studies for Coherent Electron Cooling Experiment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3032-3035. doi:10.18429/JACoW-IPAC2016-WEPOY023
[n] C. Chen, K. Zhao, B. Zhang, L. Wang, and J. Song, “RD Efforts on Nb Superconducting RF Cavity at IHIP of Peking University”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89H01, pp. XX-XX.
[n] J. N. Corlett et al., “A Next Generation Light Source Facility at LBNL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCS5, pp. 775-777.
[n] R. W. Hanft et al., “Magnetic Performance of New Fermilabe High Gradient Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2233-2236.
[n] A. Novokhatski, J. Seeman, and M. K. Sullivan, “A Model of an Electrical Discharge in the Flange Contacts with Omega Seals at High Currents in PEP-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP054, pp. 1667-1669.
[n] T. Kosuge and Y. Nagatani, “STARS: Current Development Status”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO019, pp. 75-77.
[n] Y. Zhao et al., “The Penetrability of a Thin Metallic Film Inside the RF Field”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT049, pp. 3073-3075.
[n] Y. Luo et al., “Dynamic Aperture Evaluation for the RHIC 2009 Polarized Proton Runs”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP007, pp. 2492-2494.
[n] K.-U. Kasemir, X. H. Chen, E. Danilova, and J. D. Purcell, “SNS Online Display Technologies for EPICS”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUST01, pp. 1178-1181.
[n] D. A. Dimitrov et al., “Modeling Surface Roughness Effects and Emission Properties of Bulk and Layered Metallic Photocathode”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3515-3517. doi:10.18429/JACoW-IPAC2018-THPAK116
[n] Y. Yang et al., “Recent Beam Commissioning of LEAF at IMP”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2043-2045. doi:10.18429/JACoW-IPAC2019-TUPTS051
[n] R. K. Reece et al., “Operational Experience with Light Ions at BNL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1600-1602.
[n] H. Ishii, T. Kosuge, and H. Nitani, “The Development of Vacuum Gauge Monitoring and Control System using Web2CToolkit”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 96-98. doi:10.18429/JACoW-PCaPAC2018-WEP26
[n] D. Wang et al., “100 km CEPC Parameters and Lattice Design”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2958-2961. doi:10.18429/JACoW-IPAC2017-WEPIK017
[n] G. Marcus et al., “Sensitivity of LCLS Self-Seeded Pedestal Emission to Laser Heater Strength”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 126-126. doi:10.18429/JACoW-FEL2019-TUP035
[n] P. G. O'Shea et al., “The University of Maryland Electron Ring (UMER)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA008, pp. 159-163.
[n] J. P. Ozelis et al., “Initial results from Fermilab's vertical test stand for SRF cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP15, pp. XX-XX.
[n] M. McCarthy et al., “Response of the RF Power System to Off-Normal Conditions on APT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA1, pp. 1061-1063.
[n] M. J. Syphers, “Statistics of Dipole Steering in the Tevatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2362-2365.
[n] G. Westenskow et al., “Design of a Relativistic Klystron Two-Beam Accelerator Prototype”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC16, pp. 737-739.
[n] N. Solyak et al., “3.9 GHz Power Coupler Design and Tests for LCLS-II Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2727-2729. doi:10.18429/JACoW-IPAC2018-WEPML022
[n] A. Neumann et al., “Final Design for the BERLinPro Main Linac Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP070, pp. 217-220.
[n] Y. Kuno, “High Intensity Muon Beam Facilities with FFAG”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAC001, pp. 29-33.
[n] A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678.
[n] I. S. Uzun et al., “PandA Motion Project - A Collaboration Between SOLEIL and Diamond to Upgrade Their 'Position and Acquisition' Processing Platform”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 302-305. doi:10.18429/JACoW-ICALEPCS2015-MOPGF098
[n] S. Tripathi, R. K. Bhandari, S. Ghosh, D. Kanjilal, U. Lehnert, and M. Tischer, “Design of a Compact Hybrid Undulator for the THz Radiation Facility of Delhi Light Source (DLS)”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 532-534. doi:10.18429/JACoW-FEL2017-WEP057
[n] S. M. Wei, M. Li, C. Wang, M. Yin, T. J. Zhang, and X. Zheng, “Design and Construction of Combination Magnet for CYCIAE-100”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPSH002, pp. 221-223.
[n] J. Shin et al., “Timing Synchronization Activities for Drift-Free Operation of Ultrafast Electron Diffraction System at KAERI”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 385-387. doi:10.18429/JACoW-FEL2019-WEP031
[n] W. Scandale et al., “Controlling Field Quality in Magnet Production”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB009, pp. 173-175.
[n] E. McCrory, K. Carlson, T. Owens, C. Schmidt, and L. Wahl, “Observations of the Transverse and Longitudinal Nature of the Fermilab Linac Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1534-1536.
[n] Ph. Amstutz and M. Vogt, “Development of Efficient Tree-Based Computation Methods for the Simulation of Beam Dynamics in Sparsely Populated Phase Spaces”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3569-3572. doi:10.18429/JACoW-IPAC2018-THPAK138
[n] M. A. Green et al., “Progress on the Coupling Coil for the MICE Channel”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT059, pp. 3468-3470.
[n] C. D. Nantista, C. Adolphsen, and F. Wang, “A Dual-moded Cavity for RF Breakdown Studies”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA061, pp. 3813-3815.
[n] Y. Yan et al., “Developing Criteria for Laser Transverse Instability in LWFA Simulations”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 855-857. doi:10.18429/JACoW-NAPAC2019-WEPLO05
[n] N. Kamikubota et al., “Experience of Virtual Machines in J-PARC MR Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC131, pp. 417-419.
[n] A. O. Sidorin et al., “Design of the Nuclotron Booster in the NICA Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD007, pp. 681-683.
[n] Y. Hirata, J. Franco Campos, and A. Kasugai, “Retrieving Beam Current Waveforms from ACCT Output Using Experimental Response Function for Use in Long Pulse Accelerators”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 85-90. doi:10.18429/JACoW-IBIC2019-MOPP009
[n] M. Okamura et al., “Performance of the Low Charge State Laser Ion Source in BNL”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM1C03, pp. 274-276.
[n] D. Shuman, W. Barry, S. Prestemon, R. D. Schlueter, C. Steier, and G. D. Stover, “Stray Field Reduction in ALS Eddy Current Septum Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT067, pp. 3718-3720.
[n] L. Rivkin et al., “Accelerator Physics Measurements at the Damping Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2626-2629.
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Lamm et al., “A New Facility to Test Superconducting Accelerator Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P003, pp. 3395-3397.
- Y. W. Kang et al., “Design and High Power Processing of RFQ Input Power Couplers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS074, pp. 2505-2507.
- N. Li et al., “SPEAR3 Gradient Dipole Core Fabrication”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB061, pp. 2174-2176.
- L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
- W. W. Li, Z. G. He, Q. K. Jia, S. M. Jiang, L. Wang, and D. He, “Numerical Method for Longitudinal Dynamics of a Terahertz Cherenkov Free Electron Laser Driven by a Mev Picosecond Electron Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4614-4616.
- M. Walter et al., “Alignment of Components at the University of Maryland Electron Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB075, pp. 2577-2579.
- R. R. Geraldes et al., “The Status of the New High-Dynamic DCM for Sirius”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 147-152.
- Cz. Golkowski, J. D. Ivers, J. A. Nation, P. Wang, and L. Schachter, “First Results from a High Power Ka Band TWT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA89, pp. 3603-3605.
- W. Xu et al., “RF and Mechanical Design of 647 MHz 5-Cell BNL4 Cavity for eRHIC ERL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2364-2366.
- A. V. Tollestrup, “Progress in Superconducting Magnet Technology for Accelerators/Storage Rings”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3198-3200.
- A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2811-2814.
- T. J. Shea et al., “SNS Accelerator Diagnostics: Progress and Challenges”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB001, pp. 512-516.
- J. P. Carneiro et al., “Beam Transport, Acceleration and Compression Studies in the Fermilab High-Brightness Photoinjector”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4049, pp. 878-880.
- D. Cheng et al., “Status of the PEP-II Low-Energy Ring Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P014, pp. 3619-3621.
- A. M. Porcellato et al., “Research and Development in the Field of SCRF at INFN-LNL”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOP006, pp. 50-53.
- J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3908-3911.
- G. Arduini et al., “The LHC Proton Beam in the CERN SPS: an Update”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB050, pp. 1718-1720.
- E. P. Chojnacki, R. D. Ehrlich, M. Liepe, J. Sears, and E. N. Smith, “DC Conductivity of RF Absorbing Materials”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO035, pp. 643-647.
- J. S. Berg and R. Palmer, “Cost Optimization of Non-Scaling FFAG Lattices for Muon Acceleration”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT158, pp. 902-904.
- S. Y. Zhang, “Thyristor Converter Simulation and Analysis”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1005-1008.
- D. Proch, “RF Superconductivity, A Status Review”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TU1-03, pp. 216-220.
- M. Li, “Experience with Moving from DPA to Changes in Material Properties”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B05, pp. 468-471.
- W. Fischer et al., “eRHIC in Electron-Ion Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 738-741.
- M. A. Nozdrin et al., “Hollow Photocathode Prototype for e-Gun”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD84, pp. 242-244.
- X. Lu, S. W. Quan, and K. Zhao, “The Drive Laser System for DC-SC Injector”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS35, pp. XX-XX.
- W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596.
- J. Petter, J. Marriner, and J. McCarthy, “Transverse Beam Dampers for the FNAL Antiproton Rings”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 791-794.
- Y. H. Wu, D. Kayran, V. Litvinenko, and I. Pinayev, “Beam Dynamics Studies for Coherent Electron Cooling Experiment”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3032-3035.
- C. Chen, K. Zhao, B. Zhang, L. Wang, and J. Song, “RD Efforts on Nb Superconducting RF Cavity at IHIP of Peking University”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89H01, pp. XX-XX.
- J. N. Corlett et al., “A Next Generation Light Source Facility at LBNL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOCS5, pp. 775-777.
- R. W. Hanft et al., “Magnetic Performance of New Fermilabe High Gradient Quadrupoles”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2233-2236.
- A. Novokhatski, J. Seeman, and M. K. Sullivan, “A Model of an Electrical Discharge in the Flange Contacts with Omega Seals at High Currents in PEP-II”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP054, pp. 1667-1669.
- T. Kosuge and Y. Nagatani, “STARS: Current Development Status”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO019, pp. 75-77.
- Y. Zhao et al., “The Penetrability of a Thin Metallic Film Inside the RF Field”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT049, pp. 3073-3075.
- Y. Luo et al., “Dynamic Aperture Evaluation for the RHIC 2009 Polarized Proton Runs”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP007, pp. 2492-2494.
- K.-U. Kasemir, X. H. Chen, E. Danilova, and J. D. Purcell, “SNS Online Display Technologies for EPICS”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THBHAUST01, pp. 1178-1181.
- D. A. Dimitrov et al., “Modeling Surface Roughness Effects and Emission Properties of Bulk and Layered Metallic Photocathode”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3515-3517.
- Y. Yang et al., “Recent Beam Commissioning of LEAF at IMP”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2043-2045.
- R. K. Reece et al., “Operational Experience with Light Ions at BNL”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1600-1602.
- H. Ishii, T. Kosuge, and H. Nitani, “The Development of Vacuum Gauge Monitoring and Control System using Web2CToolkit”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 96-98.
- D. Wang et al., “100 km CEPC Parameters and Lattice Design”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2958-2961.
- G. Marcus et al., “Sensitivity of LCLS Self-Seeded Pedestal Emission to Laser Heater Strength”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 126-126.
- P. G. O'Shea et al., “The University of Maryland Electron Ring (UMER)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA008, pp. 159-163.
- J. P. Ozelis et al., “Initial results from Fermilab's vertical test stand for SRF cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP15, pp. XX-XX.
- M. McCarthy et al., “Response of the RF Power System to Off-Normal Conditions on APT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA1, pp. 1061-1063.
- M. J. Syphers, “Statistics of Dipole Steering in the Tevatron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2362-2365.
- G. Westenskow et al., “Design of a Relativistic Klystron Two-Beam Accelerator Prototype”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC16, pp. 737-739.
- N. Solyak et al., “3.9 GHz Power Coupler Design and Tests for LCLS-II Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2727-2729.
- A. Neumann et al., “Final Design for the BERLinPro Main Linac Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP070, pp. 217-220.
- Y. Kuno, “High Intensity Muon Beam Facilities with FFAG”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAC001, pp. 29-33.
- A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678.
- I. S. Uzun et al., “PandA Motion Project - A Collaboration Between SOLEIL and Diamond to Upgrade Their 'Position and Acquisition' Processing Platform”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 302-305.
- S. Tripathi, R. K. Bhandari, S. Ghosh, D. Kanjilal, U. Lehnert, and M. Tischer, “Design of a Compact Hybrid Undulator for the THz Radiation Facility of Delhi Light Source (DLS)”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 532-534.
- S. M. Wei, M. Li, C. Wang, M. Yin, T. J. Zhang, and X. Zheng, “Design and Construction of Combination Magnet for CYCIAE-100”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPSH002, pp. 221-223.
- J. Shin et al., “Timing Synchronization Activities for Drift-Free Operation of Ultrafast Electron Diffraction System at KAERI”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 385-387.
- W. Scandale et al., “Controlling Field Quality in Magnet Production”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAB009, pp. 173-175.
- E. McCrory, K. Carlson, T. Owens, C. Schmidt, and L. Wahl, “Observations of the Transverse and Longitudinal Nature of the Fermilab Linac Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1534-1536.
- Ph. Amstutz and M. Vogt, “Development of Efficient Tree-Based Computation Methods for the Simulation of Beam Dynamics in Sparsely Populated Phase Spaces”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3569-3572.
- M. A. Green et al., “Progress on the Coupling Coil for the MICE Channel”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT059, pp. 3468-3470.
- C. D. Nantista, C. Adolphsen, and F. Wang, “A Dual-moded Cavity for RF Breakdown Studies”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA061, pp. 3813-3815.
- Y. Yan et al., “Developing Criteria for Laser Transverse Instability in LWFA Simulations”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 855-857.
- N. Kamikubota et al., “Experience of Virtual Machines in J-PARC MR Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC131, pp. 417-419.
- A. O. Sidorin et al., “Design of the Nuclotron Booster in the NICA Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD007, pp. 681-683.
- Y. Hirata, J. Franco Campos, and A. Kasugai, “Retrieving Beam Current Waveforms from ACCT Output Using Experimental Response Function for Use in Long Pulse Accelerators”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 85-90.
- M. Okamura et al., “Performance of the Low Charge State Laser Ion Source in BNL”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper THM1C03, pp. 274-276.
- D. Shuman, W. Barry, S. Prestemon, R. D. Schlueter, C. Steier, and G. D. Stover, “Stray Field Reduction in ALS Eddy Current Septum Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT067, pp. 3718-3720.
- L. Rivkin et al., “Accelerator Physics Measurements at the Damping Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2626-2629.
Back to search