JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Bahrdt et al., “Cryogenic Design of a PrFeB-Based Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD012, pp. 3111-3113. 
[n]	S. Koda et al., “Feasibility Study on Introducing a Superconducting Wiggler to Saga Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE006, pp. 1021-1023. 
[n]	M. Apollonio, A. P. Blondel, and D. J. Kelliher, “Muon Polarimeter in a Neutrino Factory Decay Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE053, pp. 3464-3466. 
[n]	J. M. J. Madey, W. M. Fairbank, and H. A. Schwettman, “A Free Electron Laser”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 980-984. 
[n]	J. Sekutowicz et al., “Cold- and Beam Test of the First Prototypes of the Superstructure for the TESLA Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA003, pp. 467-469. 
[n]	J. Kewisch and X. Chang, “Emittance Compensation for Magnetized Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS088, pp. 3190-3192. 
[n]	M. S. Rosenthal et al., “Muon Background Studies for Beam Dump Operation of the K12 Beam Line at CERN”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 93-98. doi:10.18429/JACoW-ICAP2018-SUPAG05
[n]	M. K. Craddock, D. I. Kaltchev, and R. V. Servranckx, “Optimization of Collimator Jaw Locations for the LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP109G, pp. 1432-1434. 
[n]	G. M. Ge, G. H. Hoffstaetter, M. Liepe, H. Padamsee, and V. D. Shemelin, “Extracting Superconducting Parameters from Surface Resistivity by Using Inside Temperature of SRF Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP016, pp. 80-83. 
[n]	M. Petrichenkov et al., “The Project of Accelerator Mass-Spectrometer at BINP”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF052, pp. 2389-2391. 
[n]	H. Kobayashi et al., “Test Linac Facility at Photon Factory, KEK”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH406, pp. 596-598. 
[n]	A. Castilla, J. R. Delayen, and H. Park, “Cryogenic Test of a 750 MHz Superconducting RF Dipole Crabbing Cavity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2672-2674. doi:10.18429/JACoW-IPAC2014-WEPRI077
[n]	R. Pakter, Y. Levin, and T. N. Teles, “Collisionless Relaxation in the Transport of Space Charge Dominated Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC100, pp. 3209-3211. 
[n]	S. Baird et al., “Stochastic Cooling and Storage Tests with Oxygen Ions in LEAR”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 645-648. 
[n]	P. N. Juranic et al., “PALM Concepts and Considerations”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 848-851. doi:10.18429/JACoW-IBIC2016-THAL01
[n]	M. Aslaninejad et al., “Lattice and Component Design for the Front End Test Stand MEBT at RAL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1205-1207. doi:10.18429/JACoW-IPAC2014-TUPRO072
[n]	W. Zhang et al., “Research and Development of RHIC Injection Kicker Upgrade with Nano Second FID Pulse Generator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD085, pp. 3716-3718. 
[n]	B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1046-1048. 
[n]	T. Satogata et al., “RHIC BPM System Modifications and Performance”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT028, pp. 2021-2023. 
[n]	T. Sokollik et al., “A High Repetition Plasma Mirror for Staged Electron Acceleration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP084, pp. 256-258. 
[n]	M. Woodley, J. Nelson, M. C. Ross, and A. Wolski, “Analysis of KEK-ATF Optics and Coupling Using LOCO”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT142, pp. 872-874. 
[n]	M. Hess, “Parametric Study of a Novel Coaxial Bunched Beam Space-charge Limit”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD023, pp. 493-495. 
[n]	V. F. Boldyshev et al., “A Design of 3 GeV CW Electron Accelerator Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 883-887. 
[n]	L. S. Cowie, B. L. Militsyn, G. Burt, J. A. Mitchell, and M. D. Roper, “VELA Photoinjector Cavity RF Investigations”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3968-3970. doi:10.18429/JACoW-IPAC2016-THPOW017
[n]	A. Morita, H. Koiso, K. Ohmi, Y. Ohnishi, H. Sugimoto, and D. Zhou, “Optics Corrections including IP Local Coupling at SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 63. doi:10.18429/JACoW-eeFACT2018-TUOAB04
[n]	E. Bravin et al., “Beam Instrumentation for the HIE-ISOLDE Linac at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR048, pp. 891-893. 
[n]	M. Liepe et al., “The CW Cornell ERL Injector Cryomodule”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP41, pp. 557-557. 
[n]	C. M. Zimmer, D. Chabot, W. S. Colocho, Y. Ding, and J. Nelson, “Longitudinal Feedback for the LCLS-II Superconducting Linear Accelerator at SLAC”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 895-898. doi:10.18429/JACoW-ICALEPCS2023-TUPDP131
[n]	M. A. Allen, Z. D. Farkas, H. A. Hogg, E. W. Hoyt, and P. B. Wilson, “Superconducting Niobium Cavity Measurements at SLAC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 168-173. 
[n]	G. Bellodi et al., “Longitudinal Beam Profile Measurements in Linac4 Commissioning”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP025, pp. 108-110. 
[n]	K. Nakamura et al., “Experimental Study of Self-Trapping in Capillary Discharge Guided Laser Wakefield Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP076, pp. 2973-2975. 
[n]	L. Bellan et al., “Source and LEBT Beam Preparation for IFMIF-EVEDA RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 420-423. doi:10.18429/JACoW-LINAC2016-TUPRC005
[n]	A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and J. Watson, “Quantum Yield Measurements of Photocathodes Illuminated by Pulsed Ultraviolet Laser Radiation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1993-1996. 
[n]	K. Sakaue et al., “Laser-Compton Scattering X-ray Source Based on Normal Conducting Linac and Optical Enhancement Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1635-1637. doi:10.18429/JACoW-IPAC2015-TUPJE011
[n]	Y. C. Liao, C. Y. Li, X. Liu, B. Qin, W. Wang, and R. X. Zhao, “CSPT: A GPU-Accelerated Lattice Design Toolkit Especially for CCT”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO004, pp. 299-302. doi:10.18429/JACoW-CYCLOTRONS2022-THPO004
[n]	B. Kaizer et al., “Study and Development of CW Room Temperature Rebuncher for SARAF Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 244-247. doi:10.18429/JACoW-LINAC2016-MOPLR050
[n]	D. A. Shkitov, A. Potylitsyn, A. S. Aryshev, and J. Urakawa, “Double Diffraction Radiation Target Interferometry for Micro-train Beam Diagnostics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3635-3637. doi:10.18429/JACoW-IPAC2014-THPME159
[n]	J.-P. Lavieville, P. Lebasque, W. Beeckman, and O. Cosson, “Adjustable Pulse Duration Fast Kicker for the CRYRING Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD069, pp. 3671-3673. 
[n]	R. Calaga, L. Ficcadenti, E. Métral, R. Tomas, J. Tuckmantel, and F. Zimmermann, “Proton-Beam Emittance Growth in SPS Coasts”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP007, pp. 3737-3739. 
[n]	M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD095, pp. 3320-3322. 
[n]	V. V. Kolotiy et al., “The Kiev 240 cm Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 87-95. 
[n]	M. E. Schulze et al., “Development of a Commissioning Plan for the APT Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA82, pp. 3582-3584. 
[n]	J. A. Hulbert et al., “Invited Paper: First Year's Operation of the Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper A-01, pp. XX-XX. 
[n]	T. Higo et al., “Linac Upgrade in Intensity and Emittance for SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR005, pp. 1819-1821. 
[n]	R. Alves Pires, D. Moehl, Y. Orlov, F. Pedersen, A. Poncet, and S. van der Meer, “On the Theory of Coherent Instabilities Due to Coupling between a Dense Cooled Beam and Charged Particles from the Residual Gas”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 800-803. 
[n]	D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212. 
[n]	D. Reschke, “Performance of Superconducting Cavities for the European XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3186-3191. doi:10.18429/JACoW-IPAC2016-THYB01
[n]	M. C. Ross et al., “Very High Resolution RF Cavity BPM”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB061, pp. 2545-2547. 
[n]	R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757. 
[n]	H. Okamoto, D. Moehl, and A. Sessler, “Three-dimensional Laser Cooling”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1205-1208. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search