JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. M. Brennan, C. E. Chen, J. W. Noe, P. Paul, A. Scholldorf, and G. D. Sprouse, “Bunching System for the Stony Brook Tandem Linac Heavy-Ion Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2798-2801. 
[n]	J. Rodnizki et al., “Steering-corrected 88 MHz QWRs for SARAF Phase II”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC012, pp. 2028-2030. 
[n]	M. Kuriki et al., “Effect of Initial Parameters on the Super Flat Beam Generation with the Phase-Space Rotation for Linear Colliders”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 442-444. doi:10.18429/JACoW-IPAC2019-MOPMP009
[n]	M. Dominiczak, F. Bouly, N. Gandolfo, and C. Joly, “Modeling of Superconducting Spoke Cavity with its Control Loops Systems for the MYRRHA Linac Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 387-391. doi:10.18429/JACoW-SRF2019-TUP002
[n]	P. N. Ostroumov et al., “Recombination of Analyzed Multiple-Charge State Heavy-Ion Beams Extracted from an ECR Ion Source”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper THCO-C02, pp. 229-229. 
[n]	C. R. Prokop, P. Piot, B. E. Carlsten, and M. D. Church, “Performance Comparisons of Emittance-exchanger Beamlines”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC21, pp. 496-498. 
[n]	S. Barbanotti, H. Hintz, K. Jensch, and W. Maschmann, “Quality Control of the Vessel and Cold Mass Production for the 1.3 GHz XFEL Cryomodules”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP031, pp. 168-170. 
[n]	F. P?®rez et al., “3HC - Third Harmonic Normal Conducting Active Cavity Collaboration Between HZB, DESY and ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1471-1474. doi:10.18429/JACoW-IPAC2022-TUPOMS028
[n]	E. Acerbi et al., “Invited Paper: The Milan Superconducting Cyclotron Project”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F02, pp. 251-256. 
[n]	A. L. Romanov et al., “CORRECTING THE ROUND BEAM LATTICE OF VEPP-2000 COLLIDER USING ORBIT RESPONSE TECHNIQUE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH27, pp. XX-XX. 
[n]	D. Toprek and Lj. Milinkovi, “Design of the Central Region for the Axial Injection in the VINCY Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2361-2364. 
[n]	J. Zeigler, R. Carcagno, and M. Weichold, “Experimental Measurements of Radiation Damage to Power Diodes at Cryogenic Temperature”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1537-1540. 
[n]	D. W. Cooke et al., “RF Superconductivity Research and Development at Los Alamos National Laboratory”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89B04, pp. XX-XX. 
[n]	T. V. Bondarenko et al., “Carbon Field Emission Strip Cathode Electron Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP129, pp. XX-XX. 
[n]	M. A. Harrison et al., “Removal of Residual Chirp in Compressed Beams Using a Passive Wakefield Technique”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO25, pp. 291-293. 
[n]	V. Bykovskiy et al., “POSITRON SOURCE FOR THE LEPTA PROJECT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP16, pp. XX-XX. 
[n]	J. Sauza-Bedolla, S. Atieh, and N. Catalan-Lasheras, “Manufacturing of X-band Accelerating Structures: Metrology Analysis and Process Capability”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 374-376. doi:10.18429/JACoW-LINAC2018-TUPO022
[n]	C. Mcguinness et al., “Timing Stability and Control at the E163 Laser Acceleration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS072, pp. 4195-4197. 
[n]	P. Castro et al., “Comparative Precision Emittance Measurments in LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1637-1640. 
[n]	M. C. Ross, R. K. Jobe, J. T. Seeman, J. C. Sheppard, and R. F. Stiening, “High Resolution Beam Profile Monitors in the SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2003-2006. 
[n]	J. W. No?® et al., “RF Superconductivity Research and Development at Stony Brook”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B07, pp. XX-XX. 
[n]	L. Barbagelata et al., “Field Integral Measurements on a Hybrid Permanent Magnet Undulator for F. E. L.”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1356-1359. 
[n]	E. Magori, N. Balal, and V. Bratman, “Helical undulators of magnetized helices and ring sectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1775-1777. doi:10.18429/JACoW-IPAC2023-TUPL002
[n]	F. Gerardin et al., “Space Charge Compensation in Low Energy Beam Lines”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3055-3057. doi:10.18429/JACoW-IPAC2016-WEPOY033
[n]	T. Bergmark et al., “Operations with Internal Targets and Electron Cooling at CELSIUS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 465-468. 
[n]	G.-H. Luo, C. K. Kuan, T. H. Lee, and D.-J. Wang, “Beam Parameters Measurement by a Pinhole Detector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI095, pp. 1930-1932. 
[n]	A. van Steenbergen, “AGS Injector and Preinjector Beam Studies”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 7-03, pp. 248-266. 
[n]	Y. Zhao et al., “Optimisation of the FCC-ee Positron Source Using a HTS Solenoid Matching Device”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2003-2006. doi:10.18429/JACoW-IPAC2022-WEPOPT062
[n]	V. Fusco, M. Ferrario, C. Ronsivalle, and C. R. Frascati, “Spatial Autocorrelation for Transverse Beam Quality Characterization”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC027, pp. 1107-1109. 
[n]	M. E. Angoletta et al., “An Ultra Low-Noise AC Beam Transformer and Digital Signal Processing System for CERN's ELENA Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF27, pp. 571-574. 
[n]	J. D. Fox, E. Linstadt, and R. Melen, “Application of Local Area Networks to Accelerator Control Systems at the Stanford Linear Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2317-2320. 
[n]	C. Wang et al., “Insertion Device Magnet Measurements for the Advanced Light Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1575-1578. 
[n]	P. Piot, D. Mihalcea, T. J. Campese, A. Y. Murokh, and J. Ruan, “Coherent Stacking Scheme for Inverse-Compton Scattering at MHz Repetition Rates”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4103-4106. doi:10.18429/JACoW-IPAC2018-THPMF028
[n]	C. Bovet and C. Fischer, “Precise Determination of the Amplitude Functions in Collider Insertions with an Application to LEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1301-1304. 
[n]	R. B. Wilcox, L. R. Doolittle, and J. W. Staples, “A Fiber Optic Synchronization System for LUX”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF077, pp. 2445-2447. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search