Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Bernardini, “Physics of Meson Factories”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63C02, pp. XX-XX.
[n] F. Scantamburlo et al., “Beam Induced Damage Studies of the IFMIF/EVEDA 125 mA CW 9 MeV D+ Linear Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2373-2376. doi:10.18429/JACoW-IPAC2016-WEPMR044
[n] A. Lieberwirth et al., “Test of the Imaging Properties of Inorganic Scintillation Screens Using Fast and Slow Extracted Ion Beams”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 516-519. doi:10.18429/JACoW-IBIC2016-TUPG70
[n] A. B. Plotnikov, E. Mustafin, N. Pyka, and P. J. Spiller, “Investigation of Lifetime of the Electronics and the Fiber Optics inside the Niche and the Tunnel in the Slow Extraction Area of SIS100”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP101, pp. 3599-3601.
[n] K. W. Smolenski, B. M. Dunham, D. L. Barth, M. Muehlbauer, S. Wacker, and J. M. Maxson, “Successful Laboratory-Industrial Partnerships: the Cornell-Friatec Segmented Insulator for High Voltage DC Photocathode Guns”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 405-407. doi:10.18429/JACoW-NAPAC2016-TUPOA59
[n] S. Lamprecht et al., “Conditioning of the Frontline Cavities of the MYRRHA Injector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 895-897. doi:10.18429/JACoW-IPAC2019-MOPTS023
[n] G. Mouchaty, D. P. May, R. C. Rogers, and P. Smelser, “Performance of the Texas AM ECRIS”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-17, pp. 369-371.
[n] D. M?ñder et al., “Status and Development of the MYRRHA Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 432-434. doi:10.18429/JACoW-IPAC2018-MOPML017
[n] R. Modic, M. Pavleski, T. Zagar, J. Belmans, P. Della Faille, and D. Vandeplassche, “MYRRHA Control System Development”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4823-4825. doi:10.18429/JACoW-IPAC2018-THPML075
[n] Y. X. Xu, D. P. May, and R. C. Rogers, “New Design for a Central Region of the K500 Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-04, pp. 342-345.
[n] M. Comunian, L. Bellan, A. Pisent, and A. V. Ziiatdinova, “Beam Dynamic Simulation for the Beam Line from Charge Breeder to ALPI for SPES Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3255-3257. doi:10.18429/JACoW-IPAC2018-THPAK022
For LaTeX
Use Complete Form
For BibTeX
References
- G. Bernardini, “Physics of Meson Factories”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63C02, pp. XX-XX.
- F. Scantamburlo et al., “Beam Induced Damage Studies of the IFMIF/EVEDA 125 mA CW 9 MeV D+ Linear Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2373-2376.
- A. Lieberwirth et al., “Test of the Imaging Properties of Inorganic Scintillation Screens Using Fast and Slow Extracted Ion Beams”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 516-519.
- A. B. Plotnikov, E. Mustafin, N. Pyka, and P. J. Spiller, “Investigation of Lifetime of the Electronics and the Fiber Optics inside the Niche and the Tunnel in the Slow Extraction Area of SIS100”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP101, pp. 3599-3601.
- K. W. Smolenski, B. M. Dunham, D. L. Barth, M. Muehlbauer, S. Wacker, and J. M. Maxson, “Successful Laboratory-Industrial Partnerships: the Cornell-Friatec Segmented Insulator for High Voltage DC Photocathode Guns”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 405-407.
- S. Lamprecht et al., “Conditioning of the Frontline Cavities of the MYRRHA Injector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 895-897.
- G. Mouchaty, D. P. May, R. C. Rogers, and P. Smelser, “Performance of the Texas AM ECRIS”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-17, pp. 369-371.
- D. M?ñder et al., “Status and Development of the MYRRHA Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 432-434.
- R. Modic, M. Pavleski, T. Zagar, J. Belmans, P. Della Faille, and D. Vandeplassche, “MYRRHA Control System Development”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4823-4825.
- Y. X. Xu, D. P. May, and R. C. Rogers, “New Design for a Central Region of the K500 Superconducting Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-04, pp. 342-345.
- M. Comunian, L. Bellan, A. Pisent, and A. V. Ziiatdinova, “Beam Dynamic Simulation for the Beam Line from Charge Breeder to ALPI for SPES Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3255-3257.
Back to search