Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Wroe and N. D. West, “High Current Commissioning of the H- Ion Accelerating Column of the ISIS Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1439-1442.
[n] J. Choi, K. M. Ha, and J. M. Kim, “Control System Development for the KOMAC Vacuum System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP522, pp. XX-XX.
[n] G. Orlandi, C. Benvenuti, S. Calatroni, and F. Scalambrin, “Expected Dependence of Nb-Coated RF Cavity Performance on the Characteristics of Niobium”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I19, pp. XX-XX.
[n] P. J. Bell, V. H. Hardion, and V. Michel, “100Hz Data Acquisition in the TANGO Control System at the Max IV Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 209-211. doi:10.18429/JACoW-ICALEPCS2015-MOPGF049
[n] W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1593-1598.
[n] A. Sytov et al., “Full simulation model of crystal-based extraction from an accelerator using BDSim and Geant4 G4ChannelingFastSimModel”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS124, unpublished.
[n] K. I. Kuzmenkov et al., “Production of Metal Ion Beams from ECR Ion Sources by MIVOC Method”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC47, pp. 432-434.
[n] E. Kako et al., “High Gradient Tests of 1.3 GHz Superconducting Cavities”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-77, pp. 251-253.
[n] I. Vladimirov et al., “Performance of the Magnetic System of a 12 MeV UPC Race-Track Microtron”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC014, pp. 472-474.
[n] C. J. Gardner et al., “Setup and Performance of RHIC for the 2008 Run with Deuteron and Gold Collisions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP011, pp. 2548-2550.
[n] R. Bartolini et al., “Optimisation of a Single-Pass Superconducting Linac as a FEL Driver for the NLS Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEOB02, pp. 480-487.
[n] K. Kishiyama, S. Shen, D. Behne, N. G. Wilson, D. Schrage, and R. Valdiviez, “Testing of Vacuum Pumps for the APT/LEDA RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4095, pp. 624-626.
[n] E. R. Lamb, F. Asvesta, H. Bartosik, and G. Sterbini, “Measurement of Transverse Statistical Dependence for Non-Gaussian Beam Distributions via Resonances in the CERN PSB”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 231-235. doi:10.18429/JACoW-HB2023-WEA2C2
[n] D. Leroy, M. Castiglioni, and D. Hagedorn, “A 5m Long Impregnated NbTi Dipole Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3701-3704.
[n] K. MacKenzie, L. Kanstein, R. Sorensen, L. Glasgow, and J. Vale, “The Berkeley Synchrocyclotron Improvement Programme”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H02, pp. XX-XX.
[n] J. Hu, H.-S. Kang, and H.-S. Lee, “Development Activites Related to RF Cables for Good Phase Stability”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 654-657. doi:10.18429/JACoW-FEL2015-WEP037
[n] J. Y. Huang et al., “Beam Diagnostic System for PAL-XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP044, pp. XX-XX.
[n] M. L. Friend, “Beam Diagnosis and Soundness Check System for Neutrino Production Targets”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper WEC1I2, unpublished.
[n] J. Hormes, “Wednesday Welcome by Josef Hormes”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WETA01, pp. XX-XX.
[n] D. Kayran et al., “Status of High Current R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP006, pp. 2148-2150.
[n] G. Burt et al., “Manufacture of a Compact Prototype 4R Crab Cavity for HL-LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO051, pp. 2420-2422.
[n] M. Haj Tahar et al., “Proton Beamline Simulations for the High Intensity Muon Beamline at PSI”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2036-2039. doi:10.18429/JACoW-IPAC2022-WEPOTK006
[n] A. Crisol et al., “ALBA BL20 New Monochromator Design”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 14. doi:10.18429/JACoW-MEDSI2020-MOOB02
[n] G. T. Semissatto, H. F. Canova, F. H. Cardoso, and J. Souza, “Beamline Supervisory System Using a Low-Cost Single-Board Computer”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 50-52. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO23
[n] J. Y. Huang, C. Kim, I. S. Ko, and Y. W. Parc, “Comparative Study of Electro-Optic Effect between Simulation and Measurement”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH041, pp. 104-106.
[n] M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3827-3829. doi:10.18429/JACoW-IPAC2024-THPS41
[n] S. C. P. Albright, C. H. Grindheim, A. Lasheen, and A. H. C. Lu, “Recent Developments in Longitudinal Phase Space Tomography”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 347-350. doi:10.18429/JACoW-IPAC2022-MOPOPT043
[n] L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2961-2964.
[n] R. von Hahn et al., “The 7-Gap Resonators for the High Current Injector of the Heidelberg Test Storage Ring TSR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1313-1316.
[n] R. Tom?ís, M. Aiba, R. Calaga, A. Morita, G. Vanbavinckhove, and J. Wenninger, “Beta-Beating Corrections in the SPS as a Testbed for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP022, pp. 2534-2536.
[n] S. Calatroni, C. Benvenuti, and V. Ruzinov, “Diffusion of Oxygen in Niobium during Bake-out”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR025, pp. XX-XX.
[n] T.-C. Tseng et al., “A vibrating wire system for multipole magnets alignment in TPS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB014, unpublished.
[n] W.-Y. Lai et al., “Design and fabrication of the automation system in TLS BL07A end station”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3785-3787. doi:10.18429/JACoW-IPAC2024-THPS23
[n] C. Benvenuti, “Extreme High Vacuum Technology for Particle Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPB002, pp. 602-606.
[n] M. Schwarz et al., “Flat-Bottom Instabilities in the CERN SPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3224-3227. doi:10.18429/JACoW-IPAC2019-WEPTS049
[n] S. Fartoukh and J. P. Koutchouk, “Chromatic Coupling in LHC and its Correction”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B11, pp. 1486-1488.
[n] I. Zagorodnov, “Ultra-Short Low Charge Operation at FLASH and the European XFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOBI2, pp. 345-352.
[n] K. Watanabe et al., “Recent Result of Cavity Inspection for the Superconducting Cavities at KEK-STF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP073, pp. 993-995.
[n] S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 407-409. doi:10.18429/JACoW-IPAC2022-MOPOPT063
[n] T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1076-1079.
[n] N. Yu. Peskov et al., “Development of Powerful Long-Pulse THz-Band FEL Driven by Linear Induction Accelerator”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 58-60. doi:10.18429/JACoW-RuPAC2021-TUC03
[n] A. van Steenbergen, “AGS Preinjector Beam Emittance Area and Emittance Area Density Distribution Measurements”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper D-08, pp. 338-380.
[n] W. Qin et al., “Dechirper System for Fresh-slice Applications at the European XFEL”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH2A1, unpublished.
[n] D. J. Clark et al., “Beams for Gammasphere at the LBNL 88-Inch Cyclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W024, pp. 1051-1053.
[n] P. A. Thompson et al., “Status of the Quadrupoles for RHIC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 503-506.
[n] R. Calaga, “Some Aspects of 704 MHz Superconducting RF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO003, pp. 514-518.
[n] H. Nissen and S. Grau, “Why Should You Invest in Asset Management? A Fire and Gas Use Case”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1042. doi:10.18429/JACoW-ICALEPCS2019-WEMPR004
[n] A. Latina, “The Tracking Code RF-Track and Its Application”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 245-248. doi:10.18429/JACoW-HB2023-WEA3C1
[n] W. H. Strong, P. A. Gurd, J. D. Creel, and B. Bevins, “The SNS Cryogenic Control System: Experiences in Collaboration”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP013, pp. XX-XX.
[n] D. Bloess et al., “Manufacturing and Testing of the First Four Superconducting Nb Cavities for LEP”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G06, pp. XX-XX.
[n] J. J. Guo et al., “Beam Loss Study for the Implementation of Dechirper at the European XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1670-1673. doi:10.18429/JACoW-IPAC2021-TUPAB119
[n] J. Preble, J. Marshall, and W. Schneider, “Superconducting Cavity Tuner Performance of CEBAF”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1396-1399.
[n] I. H. Yu et al., “The Digital Feedback RF Control System of the RFQ and DTL1 for 100 MeV Proton Linac of PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT015, pp. 1443-1445.
[n] J. H. Tan, W. Fang, Q. Gu, X. X. Huang, and Z. T. Zhao, “Design, Fabricate, and Tuning of X-Band Deflecting Structure for CERN”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2915-2917. doi:10.18429/JACoW-IPAC2019-WEPRB048
[n] M. P. Kelly et al., “Superconducting Harmonic Cavity for the Advanced Photon Source Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3267-3269. doi:10.18429/JACoW-IPAC2015-WEPTY008
[n] B. Bevins and Y. Roblin, “The Evolution of the Generic Lock System at Jefferson Lab”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MO615, pp. XX-XX.
[n] C. R. Ader, R. E. Reilly, and J. H. Wilson, “Mechanical Design of Ceramic Beam Tube Braze Joints for NOvA Kicker Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC043, pp. 4155-4157.
[n] A. Halavanau et al., “Population Inversion X-ray Laser Oscillator at LCLS and LCLS-II”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper WE2C1, unpublished.
[n] J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-01, pp. 376-379.
[n] I. L. Strydom, “An Overview of the South African Isotope Facility (SAIF) Project”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBI01, pp. 170-175. doi:10.18429/JACoW-CYCLOTRONS2022-WEBI01
[n] A. H. Barnard, “Design of a Spiral Inflector at iThemba LABS for Injecting the Beam into a Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRBI02, pp. 373-377. doi:10.18429/JACoW-CYCLOTRONS2022-FRBI02
[n] J. E. Dey and D. W. Wildman, “Wideband RF System for the Fermilab Recycler Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP85, pp. 869-871.
[n] I. H. Yu, Y.-S. Cho, D. T. Kim, S.-C. Kim, I.-S. Park, and S. J. Park, “Prototype Digital Beam Position and Phase Monitor for the 100-MeV Proton Linac of PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT008, pp. 1120-1122.
[n] S. Calatroni et al., “Influence of Copper Substrate Treatments on Properties of Niobium Coatings”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I16, pp. 49-66.
[n] B. Aune, M. Juillard, and F. Netter, “The 500 MeV Intense Positron Source of the Saclay Linac”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3773-3775.
[n] R. P. Fliller et al., “Beam Transport and Diagnostics for the NSLS-II Injection System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP006, pp. 1096-1098.
[n] V. Wu, C. M. Bhat, B. Chase, J. E. Dey, and K. G. Meisner, “Experimental Test of a New Antiproton Acceleration Scheme in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE012, pp. 1303-1305.
[n] S. K. Sharma, “A Comparison of Front-End Design Requirements”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 53. doi:10.18429/JACoW-MEDSI2020-MOPB15
[n] I. H. Yu et al., “RFQ Low Level RF System for the PEFP 100MeV Proton Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT096, pp. 1381-1383.
[n] B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “A Proposal to Pulse the Bevatron/Bevalac Main Guide Field Magnet with SCR Power Supplies”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1893-1896.
[n] M. Sakieldien, “Exploratory investigation into the causes of beam instabilities using Machine Learning”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM044, unpublished.
[n] O. Bagnato, R. Defavari, F. Francisco, and D. Kakizaki, “Characterization of Sn100cv filler metal in UNS C10700 copper silver alloy vacuum soldering for Sirius vacuum chamber manufacturing”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM014, unpublished.
[n] A. Perillo Marcone, “Beam Intercepting Device Challenges for High Intensity Accelerators - a Global Perspective”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper WEC2I1, unpublished.
[n] C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
[n] D. L. Turner, “eDT and Model-based Configuration of 12 GeV CEBAF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1259-1261. doi:10.18429/JACoW-IPAC2015-MOPWI046
[n] L. M. Gu, S. F. Lin, P. Lu, C. B. Shen, and B. Sun, “Signal Processing Methods for the Staggered Pair Photon Beam Position Monitor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP055, pp. 4078-4080.
[n] M. Wiseman et al., “Commissioning of the CEBAF Cryomodules”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 841-844.
[n] D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 112-115.
[n] M. A. L. Moraes et al., “A Control Architecture Proposal for Sirius Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1947-1952. doi:10.18429/JACoW-ICALEPCS2017-THPHA215
[n] A. Chen et al., “Automation of sample alignment for neutron beamlines”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS070, unpublished.
[n] S. J. Burger et al., “The Electrolytic Tank Facility at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B12, pp. 63-66.
[n] A. Barty, “Ultrafast Single-Shot Diffraction Imaging of Nanoscale Dynamics”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROBI1, pp. 715-715.
[n] J.-M. Lagniel, “Synchronous Phases and Transit Time Factor”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 241-244. doi:10.18429/JACoW-HB2023-WEA3I1
[n] D. Peterson and J. Marriner, “A Frequency Tracking Synthesizer for Beam Diagnostic Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1228-1231.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Wroe and N. D. West, “High Current Commissioning of the H- Ion Accelerating Column of the ISIS Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1439-1442.
- J. Choi, K. M. Ha, and J. M. Kim, “Control System Development for the KOMAC Vacuum System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP522, pp. XX-XX.
- G. Orlandi, C. Benvenuti, S. Calatroni, and F. Scalambrin, “Expected Dependence of Nb-Coated RF Cavity Performance on the Characteristics of Niobium”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I19, pp. XX-XX.
- P. J. Bell, V. H. Hardion, and V. Michel, “100Hz Data Acquisition in the TANGO Control System at the Max IV Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 209-211.
- W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1593-1598.
- A. Sytov et al., “Full simulation model of crystal-based extraction from an accelerator using BDSim and Geant4 G4ChannelingFastSimModel”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS124, this conference.
- K. I. Kuzmenkov et al., “Production of Metal Ion Beams from ECR Ion Sources by MIVOC Method”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC47, pp. 432-434.
- E. Kako et al., “High Gradient Tests of 1.3 GHz Superconducting Cavities”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-77, pp. 251-253.
- I. Vladimirov et al., “Performance of the Magnetic System of a 12 MeV UPC Race-Track Microtron”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC014, pp. 472-474.
- C. J. Gardner et al., “Setup and Performance of RHIC for the 2008 Run with Deuteron and Gold Collisions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP011, pp. 2548-2550.
- R. Bartolini et al., “Optimisation of a Single-Pass Superconducting Linac as a FEL Driver for the NLS Project”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEOB02, pp. 480-487.
- K. Kishiyama, S. Shen, D. Behne, N. G. Wilson, D. Schrage, and R. Valdiviez, “Testing of Vacuum Pumps for the APT/LEDA RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4095, pp. 624-626.
- E. R. Lamb, F. Asvesta, H. Bartosik, and G. Sterbini, “Measurement of Transverse Statistical Dependence for Non-Gaussian Beam Distributions via Resonances in the CERN PSB”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA2C2, pp. 231-235.
- D. Leroy, M. Castiglioni, and D. Hagedorn, “A 5m Long Impregnated NbTi Dipole Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3701-3704.
- K. MacKenzie, L. Kanstein, R. Sorensen, L. Glasgow, and J. Vale, “The Berkeley Synchrocyclotron Improvement Programme”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69H02, pp. XX-XX.
- J. Hu, H.-S. Kang, and H.-S. Lee, “Development Activites Related to RF Cables for Good Phase Stability”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 654-657.
- J. Y. Huang et al., “Beam Diagnostic System for PAL-XFEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP044, pp. XX-XX.
- M. L. Friend, “Beam Diagnosis and Soundness Check System for Neutrino Production Targets”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC1I2, unpublished.
- J. Hormes, “Wednesday Welcome by Josef Hormes”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WETA01, pp. XX-XX.
- D. Kayran et al., “Status of High Current R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP006, pp. 2148-2150.
- G. Burt et al., “Manufacture of a Compact Prototype 4R Crab Cavity for HL-LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO051, pp. 2420-2422.
- M. Haj Tahar et al., “Proton Beamline Simulations for the High Intensity Muon Beamline at PSI”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2036-2039.
- A. Crisol et al., “ALBA BL20 New Monochromator Design”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 14.
- G. T. Semissatto, H. F. Canova, F. H. Cardoso, and J. Souza, “Beamline Supervisory System Using a Low-Cost Single-Board Computer”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 50-52.
- J. Y. Huang, C. Kim, I. S. Ko, and Y. W. Parc, “Comparative Study of Electro-Optic Effect between Simulation and Measurement”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH041, pp. 104-106.
- M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS41, pp. 3827-3829.
- S. C. P. Albright, C. H. Grindheim, A. Lasheen, and A. H. C. Lu, “Recent Developments in Longitudinal Phase Space Tomography”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 347-350.
- L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2961-2964.
- R. von Hahn et al., “The 7-Gap Resonators for the High Current Injector of the Heidelberg Test Storage Ring TSR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1313-1316.
- R. Tom?ís, M. Aiba, R. Calaga, A. Morita, G. Vanbavinckhove, and J. Wenninger, “Beta-Beating Corrections in the SPS as a Testbed for the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP022, pp. 2534-2536.
- S. Calatroni, C. Benvenuti, and V. Ruzinov, “Diffusion of Oxygen in Niobium during Bake-out”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR025, pp. XX-XX.
- T.-C. Tseng et al., “A vibrating wire system for multipole magnets alignment in TPS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB014, this conference.
- W.-Y. Lai et al., “Design and fabrication of the automation system in TLS BL07A end station”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS23, pp. 3785-3787.
- C. Benvenuti, “Extreme High Vacuum Technology for Particle Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPB002, pp. 602-606.
- M. Schwarz et al., “Flat-Bottom Instabilities in the CERN SPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3224-3227.
- S. Fartoukh and J. P. Koutchouk, “Chromatic Coupling in LHC and its Correction”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B11, pp. 1486-1488.
- I. Zagorodnov, “Ultra-Short Low Charge Operation at FLASH and the European XFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOBI2, pp. 345-352.
- K. Watanabe et al., “Recent Result of Cavity Inspection for the Superconducting Cavities at KEK-STF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP073, pp. 993-995.
- S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 407-409.
- T. Y. T. Kuo, J. Conti, J. S. Laughlin, R. Lee, and M. Shufer, “The Use of Digital Techniques for Automatic RF Control of the CS-15 Compact Clyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1076-1079.
- N. Yu. Peskov et al., “Development of Powerful Long-Pulse THz-Band FEL Driven by Linear Induction Accelerator”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 58-60.
- A. van Steenbergen, “AGS Preinjector Beam Emittance Area and Emittance Area Density Distribution Measurements”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper D-08, pp. 338-380.
- W. Qin et al., “Dechirper System for Fresh-slice Applications at the European XFEL”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH2A1, unpublished.
- D. J. Clark et al., “Beams for Gammasphere at the LBNL 88-Inch Cyclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W024, pp. 1051-1053.
- P. A. Thompson et al., “Status of the Quadrupoles for RHIC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 503-506.
- R. Calaga, “Some Aspects of 704 MHz Superconducting RF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO003, pp. 514-518.
- H. Nissen and S. Grau, “Why Should You Invest in Asset Management? A Fire and Gas Use Case”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1042.
- A. Latina, “The Tracking Code RF-Track and Its Application”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA3C1, pp. 245-248.
- W. H. Strong, P. A. Gurd, J. D. Creel, and B. Bevins, “The SNS Cryogenic Control System: Experiences in Collaboration”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP013, pp. XX-XX.
- D. Bloess et al., “Manufacturing and Testing of the First Four Superconducting Nb Cavities for LEP”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G06, pp. XX-XX.
- J. J. Guo et al., “Beam Loss Study for the Implementation of Dechirper at the European XFEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1670-1673.
- J. Preble, J. Marshall, and W. Schneider, “Superconducting Cavity Tuner Performance of CEBAF”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1396-1399.
- I. H. Yu et al., “The Digital Feedback RF Control System of the RFQ and DTL1 for 100 MeV Proton Linac of PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT015, pp. 1443-1445.
- J. H. Tan, W. Fang, Q. Gu, X. X. Huang, and Z. T. Zhao, “Design, Fabricate, and Tuning of X-Band Deflecting Structure for CERN”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2915-2917.
- M. P. Kelly et al., “Superconducting Harmonic Cavity for the Advanced Photon Source Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3267-3269.
- B. Bevins and Y. Roblin, “The Evolution of the Generic Lock System at Jefferson Lab”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MO615, pp. XX-XX.
- C. R. Ader, R. E. Reilly, and J. H. Wilson, “Mechanical Design of Ceramic Beam Tube Braze Joints for NOvA Kicker Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC043, pp. 4155-4157.
- A. Halavanau et al., “Population Inversion X-ray Laser Oscillator at LCLS and LCLS-II”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE2C1, unpublished.
- J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-01, pp. 376-379.
- I. L. Strydom, “An Overview of the South African Isotope Facility (SAIF) Project”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEBI01, pp. 170-175.
- A. H. Barnard, “Design of a Spiral Inflector at iThemba LABS for Injecting the Beam into a Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper FRBI02, pp. 373-377.
- J. E. Dey and D. W. Wildman, “Wideband RF System for the Fermilab Recycler Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP85, pp. 869-871.
- I. H. Yu, Y.-S. Cho, D. T. Kim, S.-C. Kim, I.-S. Park, and S. J. Park, “Prototype Digital Beam Position and Phase Monitor for the 100-MeV Proton Linac of PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT008, pp. 1120-1122.
- S. Calatroni et al., “Influence of Copper Substrate Treatments on Properties of Niobium Coatings”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I16, pp. 49-66.
- B. Aune, M. Juillard, and F. Netter, “The 500 MeV Intense Positron Source of the Saclay Linac”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3773-3775.
- R. P. Fliller et al., “Beam Transport and Diagnostics for the NSLS-II Injection System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP006, pp. 1096-1098.
- V. Wu, C. M. Bhat, B. Chase, J. E. Dey, and K. G. Meisner, “Experimental Test of a New Antiproton Acceleration Scheme in the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE012, pp. 1303-1305.
- S. K. Sharma, “A Comparison of Front-End Design Requirements”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 53.
- I. H. Yu et al., “RFQ Low Level RF System for the PEFP 100MeV Proton Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT096, pp. 1381-1383.
- B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “A Proposal to Pulse the Bevatron/Bevalac Main Guide Field Magnet with SCR Power Supplies”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1893-1896.
- M. Sakieldien, “Exploratory investigation into the causes of beam instabilities using Machine Learning”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM044, unpublished.
- O. Bagnato, R. Defavari, F. Francisco, and D. Kakizaki, “Characterization of Sn100cv filler metal in UNS C10700 copper silver alloy vacuum soldering for Sirius vacuum chamber manufacturing”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM014, unpublished.
- A. Perillo Marcone, “Beam Intercepting Device Challenges for High Intensity Accelerators - a Global Perspective”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC2I1, unpublished.
- C. M. Merry and J. C. Cornell, “An Orthogonal Quadrupole System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-35, pp. 509-511.
- D. L. Turner, “eDT and Model-based Configuration of 12 GeV CEBAF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1259-1261.
- L. M. Gu, S. F. Lin, P. Lu, C. B. Shen, and B. Sun, “Signal Processing Methods for the Staggered Pair Photon Beam Position Monitor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP055, pp. 4078-4080.
- M. Wiseman et al., “Commissioning of the CEBAF Cryomodules”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 841-844.
- D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 112-115.
- M. A. L. Moraes et al., “A Control Architecture Proposal for Sirius Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1947-1952.
- A. Chen et al., “Automation of sample alignment for neutron beamlines”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS070, this conference.
- S. J. Burger et al., “The Electrolytic Tank Facility at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B12, pp. 63-66.
- A. Barty, “Ultrafast Single-Shot Diffraction Imaging of Nanoscale Dynamics”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROBI1, pp. 715-715.
- J.-M. Lagniel, “Synchronous Phases and Transit Time Factor”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA3I1, pp. 241-244.
- D. Peterson and J. Marriner, “A Frequency Tracking Synthesizer for Beam Diagnostic Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1228-1231.
Back to search