JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Favourites


For Word

[n]	N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4376-4379. doi:10.18429/JACoW-IPAC2019-FRXXPLS3
[n]	A. M. Marendziak, M. Rozwadowski, T. Sobol, M. J. Stankiewicz, and A. I. Wawrzyniak, “Three Years of Operational Experience With the Solaris Vacuum System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3888-3890. doi:10.18429/JACoW-IPAC2018-THPAL107
[n]	Y. M. Pischalnikov et al., “A Technique for Monitoring Fast Tuner Piezoactuator Preload Forces for Superconducting RF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN108, pp. 2289-2291. 
[n]	F. Valentini, M. Munoz-Codoceo, and P. Ninin, “Versatile Service for the Protection of Experimental Areas at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1634-1638. doi:10.18429/JACoW-ICALEPCS2017-THPHA108
[n]	L. L. Reginato et al., “Advanced Test Accelerator (ATA) Pulse Power Technology Development”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2758-2761. 
[n]	P. K. Den Hartog, J. Gagliano, G. A. Goeppner, J. Noonan, E. Trakhtenberg, and G. Wiemerslage, “Vacuum System of the APS: Operation Experience and Status Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPB003, pp. 607-609. 
[n]	V. Kamerdzhiev, C. B?Âhme, J. Dietrich, P. Forck, T. Giacomini, and D. A. Liakin, “Beam Test of the FAIR IPM Prototype in COSY”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB12, pp. 191-193. 
[n]	C. A. Ludemann, J. M. Domaschko, K. Hagemann, and S. W. Mosko, “Computer Control of the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 618-621. 
[n]	J. Lee et al., “Emittance Measurements at the PAL-XFEL Injector Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 690-693. doi:10.18429/JACoW-FEL2015-WEP058
[n]	T. Fanselow, J. Bundesmann, A. Denker, A. Dittwald, and U. Hiller, “Design and Operation of the New Fast Beam Chopper between Tandetron and Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO011, pp. 76-79. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO011
[n]	D. Birx et al., “The Application of Magnetic Switches as Pulse Sources for Induction Linacs”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2763-2769. 
[n]	X. D. Yang et al., “Investigation on the Suppression of Intrabeam Scattering in the High Intensity Heavy Ion Beam with the Help of Double-bunch of Electron”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 67-69. doi:10.18429/JACoW-SAP2017-MOPH18
[n]	A. Blednykh et al., “Impedance Modeling for eRHIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1309-1311. doi:10.18429/JACoW-IPAC2018-TUPMF027
[n]	M. Chung et al., “Longitudinal Electron Bunch Shaping Experiments at the PAL-ITF”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 694-697. doi:10.18429/JACoW-FEL2015-WEP060
[n]	A. V. Zlobin, V. V. Kashikhin, and J. B. Strait, “Aperture Limitations for 2nd Generation Nb3Sn LHC IR Quadrupoles”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE018, pp. 1975-1977. 
[n]	S. Brooks, “Non-scaling fixed-field proton accelerator with constant tunes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2257-2260. doi:10.18429/JACoW-IPAC2023-TUPM031
[n]	G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 277-279. doi:10.18429/JACoW-MEDSI2018-WEPH32
[n]	W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145. 
[n]	E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649. 
[n]	H. O. Moser et al., “ANKA, A Synchrotron Light Source for Microstructure Fabrication and Analysis”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR06, pp. 272-274. 
[n]	C. A. Ludemann, J. M. Domaschko, and S. W. Mosko, “Computer Control System for ORIC”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 500-510. 
[n]	G. Ambrosio et al., “Design and Development of Nb3Sn Single-Layer Common Coil Dipole Magnet for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH079, pp. 3409-3411. 
[n]	B. H. Choi, K. S. Kim, Y. S. Cho, J. M. Han, W. S. Song, and Y. J. Kim, “A 3.0MeV KOMAC/KTF RFQ Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD01, pp. 542-544. 
[n]	M. Lieuvin, “The R.I.B. Facility under Construction at GANIL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 563-566. 
[n]	D. Walters, J. Noonan, J. Gagliano, G. Harris, and V. Svirtun, “An Ancillary Pumping System for the APS Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P001, pp. 3580-3582. 
[n]	P. J. Tallerico, “Invited Paper- Advances in High-Power RF Amplifiers”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3877-3882. 
[n]	J. B. Ball, E. D. Hudson, R. S. Lord, J. A. Martin, G. S. McNeilly, and S. W. Mosko, “Invited Paper: Status of the Holifield Heavy Ion Research Facility Phase II Booster”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-04, pp. 2055-2060. 
[n]	W. T. Kitka et al., “Heating Unit Controller at NSRC SOLARIS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3885-3887. doi:10.18429/JACoW-IPAC2018-THPAL106
[n]	V. P. Voevodin, “Logging Actions of Operators in the IHEP U-70 Accelerator Complex Control System”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB035, pp. 248-250. 
[n]	S. Delchamps et al., “SSC Collider Dipole Magnet End Mechanical Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2185-2188. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search