Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. L. Chen et al., “Development of an IGBT Pulser for TPS LTB Kicker”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3191-3193. doi:10.18429/JACoW-IPAC2015-WEPHA035
[n] K. Woods, R. J. Clegg, R. Millward, F. Barnsely, and C. Jones, “Scalable High Demand Analytics Environments with Heterogeneous Clouds”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 170. doi:10.18429/JACoW-ICALEPCS2019-MOMPR007
[n] N. Li, A. Madur, and J. Jin, “Tightening the Tolerance Budget of Core Fabrication to Achieve Higher Magnet Performance”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO022, pp. 2448-2450.
[n] T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110.
[n] H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
[n] H. V. Smith, L. M. Young, J. D. Schneider, L. J. Rybarcyk, and M. Schulze, “High Power Operations of LEDA”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TU201, pp. 336-340.
[n] N. Hubert, L. Cassinari, J.-C. Denard, A. Nadji, L. S. N. Nadolski, and D. Pedeau, “Design of a Fast Orbit Feedback for SOLEIL”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT019, pp. XX-XX.
[n] W. Kells, F. Krienen, P. McIntyre, F. Mills, L. Oleksiuk, and J. Peoples, “Electron Cooling for the Fermilab pbar Source”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2583-2585.
[n] K. Saito, “Hydro Forming of TESLA Cavities at DESY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEOAF104, pp. 327-329.
[n] V. Alberti et al., “A Lean UX Approach for Developing Effective Monitoring and Control User Interfaces: A Case Study for the SKA CSP. LMC Subsystem”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1650-1656. doi:10.18429/JACoW-ICALEPCS2023-FR2BCO02
[n] M. Blaskiewicz, J. M. Brennan, and K. Mernick, “Longitudinal Impedance of RHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 746-747. doi:10.18429/JACoW-IPAC2015-MOPMN020
[n] K. F. Johnson et al., “Phase-Scan Analysis Results for the First Drift Tube Linac Module in the Ground Test Accelerator: Data Reproducibility and Comparison to Simulations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR19, pp. 1161-1163.
[n] K. L. F. Bane and G. V. Stupakov, “Resistive Wall Wakefield in the LCLS Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE057, pp. 3390-3392.
[n] C. D. Johnson, E. Jones, and T. R. Sherwood, “Antiproton Yield Expectations for the ACOL Project”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1749-1752.
[n] G. I. Batskikh, B. V. Bekhtev, V. A. Boiko, V. V. Elian, and A. V. Mishchenko, “Electron Accelerator for Transmutation of FIssion Products and Nuclear Fuel Cycle Actinides”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2601-2604.
[n] C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2877-2880. doi:10.18429/JACoW-IPAC2023-WEPA099
For LaTeX
Use Complete Form
For BibTeX
References
- C. L. Chen et al., “Development of an IGBT Pulser for TPS LTB Kicker”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3191-3193.
- K. Woods, R. J. Clegg, R. Millward, F. Barnsely, and C. Jones, “Scalable High Demand Analytics Environments with Heterogeneous Clouds”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 170.
- N. Li, A. Madur, and J. Jin, “Tightening the Tolerance Budget of Core Fabrication to Achieve Higher Magnet Performance”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO022, pp. 2448-2450.
- T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110.
- H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
- H. V. Smith, L. M. Young, J. D. Schneider, L. J. Rybarcyk, and M. Schulze, “High Power Operations of LEDA”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TU201, pp. 336-340.
- N. Hubert, L. Cassinari, J.-C. Denard, A. Nadji, L. S. N. Nadolski, and D. Pedeau, “Design of a Fast Orbit Feedback for SOLEIL”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT019, pp. XX-XX.
- W. Kells, F. Krienen, P. McIntyre, F. Mills, L. Oleksiuk, and J. Peoples, “Electron Cooling for the Fermilab pbar Source”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2583-2585.
- K. Saito, “Hydro Forming of TESLA Cavities at DESY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEOAF104, pp. 327-329.
- V. Alberti et al., “A Lean UX Approach for Developing Effective Monitoring and Control User Interfaces: A Case Study for the SKA CSP. LMC Subsystem”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper FR2BCO02, pp. 1650-1656.
- M. Blaskiewicz, J. M. Brennan, and K. Mernick, “Longitudinal Impedance of RHIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 746-747.
- K. F. Johnson et al., “Phase-Scan Analysis Results for the First Drift Tube Linac Module in the Ground Test Accelerator: Data Reproducibility and Comparison to Simulations”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR19, pp. 1161-1163.
- K. L. F. Bane and G. V. Stupakov, “Resistive Wall Wakefield in the LCLS Undulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE057, pp. 3390-3392.
- C. D. Johnson, E. Jones, and T. R. Sherwood, “Antiproton Yield Expectations for the ACOL Project”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1749-1752.
- G. I. Batskikh, B. V. Bekhtev, V. A. Boiko, V. V. Elian, and A. V. Mishchenko, “Electron Accelerator for Transmutation of FIssion Products and Nuclear Fuel Cycle Actinides”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2601-2604.
- C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA099, pp. 2877-2880.
Back to search