Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. G. Wilson, “Vacuum System Design Considerations of the Los Alamos Accelerator Test Stand (ATS)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-34, pp. 125-127.
[n] S. S. Cha, Y. Kim, B. C. Lee, B. N. Lee, H. D. Park, and K. B. Song, “Advanced Automatic Frequency Control System for a Dual Energy S-band RF Electron Linear Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2459-2461. doi:10.18429/JACoW-IPAC2014-WEPME077
[n] C. S. Huang et al., “Development of Operating Alarm System at TPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2684-2686. doi:10.18429/JACoW-IPAC2019-WEPGW085
[n] D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
[n] A. Shor, D. Berkovits, I. Fishman, A. Grin, B. Kaizer, and L. Weissman, “Performance of Beam Chopper at SARAF via RF Deflector Before the RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB094, pp. 1038-1040.
[n] L. T. Sun et al., “ECRIS Developments Towards Intense High Brightness Highly-charged Ion Beams”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO2AB01, pp. 363-368.
[n] G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
[n] I. Eliyahu et al., “Control of the SARAF High Intensity CW Protron Beam Target Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS008, pp. 336-338.
[n] M. Aslaninejad et al., “Lattice and Component Design for the Front End Test Stand MEBT at RAL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1205-1207. doi:10.18429/JACoW-IPAC2014-TUPRO072
[n] E. Reinfeld et al., “SARAF Beam Lines Control Systems Design”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS006, pp. 329-332.
[n] V. Miltchev et al., “Transverse Emittance Measurements at the Photo Injector Test Facility at DESY Zeuthen (PITZ)”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT23, pp. XX-XX.
[n] A. Daly, C. W. Appelbee, and D. Bayley, “Current Monitor for the ISIS Synchrotron RF Cavity Bias Regulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN104, pp. 407-409.
[n] A. Webber-Date, C. Swain, J. Wolfenden, C. Welsch, and H. Zhang, “Characterisation and analysis of supersonic gas jets using interferometric measurement methods”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4588-4591. doi:10.18429/JACoW-IPAC2023-THPL068
[n] D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
[n] I. Eliyahu et al., “Use CR-39 Plastic Dosimeters for Beam Ion Halo Measurements”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 376-378. doi:10.18429/JACoW-IBIC2016-TUPG23
[n] A. Kurup, “An Automated Conditioning System for the MUCOOL Experiments at Fermilab”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ011, pp. 844-846.
[n] B. J. A. Shepherd, J. A. Clarke, A. Bartalesi, M. Modena, M. Struik, and N. A. Collomb, “Prototype Adjustable Permanent Magnet Quadrupoles For CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME043, pp. 3606-3608.
[n] F. Furuta, B. Elmore, A. C. Crawford, G. M. Ge, G. H. Hoffstaetter, and M. Liepe, “Multi-cell VEP Results: High Voltage, High Q, and Localized Temperature Analysis”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR045, pp. 1918-1920.
[n] R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
[n] M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD095, pp. 3320-3322.
[n] H. Haseroth et al., “Ion Acceleration in the CERN Linac 1”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-41, pp. 355-357.
[n] N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
[n] C. Bourat, H. Braun, and L. Rinolfi, “New Optics of the LEP Injector Linac for Positron Production”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 704-707.
[n] A. Kurup, P. Bonnal, B. Daudin, J. De Jonghe, and M. Dutour, “An Accelerator Design Tool for the International Design Study for the Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ010, pp. 841-843.
[n] A. Kreisel et al., “SARAF Phase-I Proton / Deuteron Linac Beam Operation Status”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB02, pp. 770-774.
[n] G. V. Dolbilov et al., “Project of SILUND-21 Linear Induction Accelerator for Generation of CLIC Driving Beam (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-01, pp. 357-359.
[n] Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
[n] B. J. A. Shepherd, J. A. Clarke, and N. A. Collomb, “Construction and Measurement of Novel Adjustable Permanent Magnet Quadrupoles for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD016, pp. 3530-3532.
[n] J. Y. Benitez, C. M. Lyneis, L. Phair, D. S. Todd, and D. Xie, “Recent Bremsstrahlung Measurements from the Superconducting Electron Cyclotron Resonance Ion Source VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 23-29. doi:10.18429/JACoW-ECRIS2016-MOCO04
[n] J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 693-697. doi:10.18429/JACoW-LINAC2016-TH1A04
[n] P. Buaphad et al., “6/9 MeV S-band Standing Wave Accelerating Structure for Container X-ray Inspection System at RTX”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1924-1926. doi:10.18429/JACoW-IPAC2016-TUPOY010
[n] X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
[n] A. Perry, Y. Ben Aliz, B. Kaizer, A. Kreisel, J. Rodnizki, and L. Weissman, “Status of SARAF Superconducting Acceleration Module”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO011, pp. 69-73.
[n] V. G. Dolbilov et al., “The KUTI-20 Accelerator First Stage Adjusting”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-47, pp. 367-370.
[n] M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP094, pp. 3584-3586.
For LaTeX
Use Complete Form
For BibTeX
References
- N. G. Wilson, “Vacuum System Design Considerations of the Los Alamos Accelerator Test Stand (ATS)”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-34, pp. 125-127.
- S. S. Cha, Y. Kim, B. C. Lee, B. N. Lee, H. D. Park, and K. B. Song, “Advanced Automatic Frequency Control System for a Dual Energy S-band RF Electron Linear Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2459-2461.
- C. S. Huang et al., “Development of Operating Alarm System at TPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2684-2686.
- D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 141-145.
- A. Shor, D. Berkovits, I. Fishman, A. Grin, B. Kaizer, and L. Weissman, “Performance of Beam Chopper at SARAF via RF Deflector Before the RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB094, pp. 1038-1040.
- L. T. Sun et al., “ECRIS Developments Towards Intense High Brightness Highly-charged Ion Beams”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO2AB01, pp. 363-368.
- G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
- I. Eliyahu et al., “Control of the SARAF High Intensity CW Protron Beam Target Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS008, pp. 336-338.
- M. Aslaninejad et al., “Lattice and Component Design for the Front End Test Stand MEBT at RAL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1205-1207.
- E. Reinfeld et al., “SARAF Beam Lines Control Systems Design”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS006, pp. 329-332.
- V. Miltchev et al., “Transverse Emittance Measurements at the Photo Injector Test Facility at DESY Zeuthen (PITZ)”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT23, pp. XX-XX.
- A. Daly, C. W. Appelbee, and D. Bayley, “Current Monitor for the ISIS Synchrotron RF Cavity Bias Regulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN104, pp. 407-409.
- A. Webber-Date, C. Swain, J. Wolfenden, C. Welsch, and H. Zhang, “Characterisation and analysis of supersonic gas jets using interferometric measurement methods”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL068, pp. 4588-4591.
- D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
- I. Eliyahu et al., “Use CR-39 Plastic Dosimeters for Beam Ion Halo Measurements”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 376-378.
- A. Kurup, “An Automated Conditioning System for the MUCOOL Experiments at Fermilab”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ011, pp. 844-846.
- B. J. A. Shepherd, J. A. Clarke, A. Bartalesi, M. Modena, M. Struik, and N. A. Collomb, “Prototype Adjustable Permanent Magnet Quadrupoles For CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME043, pp. 3606-3608.
- F. Furuta, B. Elmore, A. C. Crawford, G. M. Ge, G. H. Hoffstaetter, and M. Liepe, “Multi-cell VEP Results: High Voltage, High Q, and Localized Temperature Analysis”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR045, pp. 1918-1920.
- R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
- M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD095, pp. 3320-3322.
- H. Haseroth et al., “Ion Acceleration in the CERN Linac 1”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-41, pp. 355-357.
- N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
- C. Bourat, H. Braun, and L. Rinolfi, “New Optics of the LEP Injector Linac for Positron Production”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 704-707.
- A. Kurup, P. Bonnal, B. Daudin, J. De Jonghe, and M. Dutour, “An Accelerator Design Tool for the International Design Study for the Neutrino Factory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ010, pp. 841-843.
- A. Kreisel et al., “SARAF Phase-I Proton / Deuteron Linac Beam Operation Status”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB02, pp. 770-774.
- G. V. Dolbilov et al., “Project of SILUND-21 Linear Induction Accelerator for Generation of CLIC Driving Beam (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-01, pp. 357-359.
- Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
- B. J. A. Shepherd, J. A. Clarke, and N. A. Collomb, “Construction and Measurement of Novel Adjustable Permanent Magnet Quadrupoles for CLIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD016, pp. 3530-3532.
- J. Y. Benitez, C. M. Lyneis, L. Phair, D. S. Todd, and D. Xie, “Recent Bremsstrahlung Measurements from the Superconducting Electron Cyclotron Resonance Ion Source VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 23-29.
- J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 693-697.
- P. Buaphad et al., “6/9 MeV S-band Standing Wave Accelerating Structure for Container X-ray Inspection System at RTX”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1924-1926.
- X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
- A. Perry, Y. Ben Aliz, B. Kaizer, A. Kreisel, J. Rodnizki, and L. Weissman, “Status of SARAF Superconducting Acceleration Module”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO011, pp. 69-73.
- V. G. Dolbilov et al., “The KUTI-20 Accelerator First Stage Adjusting”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-47, pp. 367-370.
- M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP094, pp. 3584-3586.
Back to search