Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. J. Summers, J. S. Berg, A. A. Garren, and R. B. Palmer, “A Very Fast Ramping Muon Synchrotron for a Neutrino Factory”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB092, pp. 1804-1806.
[n] M. Kuriki et al., “FEL Enhancement by Microbuch Structure Made with Phase-Space Rotation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1570-1572. doi:10.18429/JACoW-IPAC2015-TUPWA063
[n] M. Schaumann and J. M. Jowett, “Bunch-by-Bunch Analysis of the LHC Heavy-Ion Luminosity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI025, pp. 1391-1393.
[n] F. E. Mills, “ISABELLE Design Study”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1036-1039.
[n] S. Takano et al., “Beam-Based Calibration of Sextupole Magnet Displacement with Betatron Tune Shift”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 192-195. doi:10.18429/JACoW-IBIC2022-TU1C3
[n] O. Naumann and J. Jacob, “Fractional Filling Induced Landau Damping of Longitudinal Instabilities at the ESRF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B007, pp. 1551-1553.
[n] V. Veshcherevich and S. Belomestnykh, “Buncher Cavity for ERL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB008, pp. 1198-1200.
[n] F. Lucas Rodriguez, I. Atanassov, P. Palazzi, and F. Ravotti, “The TOTEM Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP049, pp. 197-199.
[n] J. W. Kim and H. Kim, “Quality Factor Measurement Method Using Multi Decay Time Constants on Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1011-1013. doi:10.18429/JACoW-LINAC2016-THPLR069
[n] Y. Mori, S. Fukumoto, K. Ikegami, and A. Takagi, “KEK Optically Pumped Polarized H- Ion Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1779-1782.
[n] A. Andrighetto et al., “The SPES RIB Production Complex”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUA2C03, pp. 160-162.
[n] J. D. Fox et al., “A 4.2 GS/s Synchronized Vertical Excitation System for SPS Studies - Steps Toward Wideband Feedback”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR090, pp. 3144-3146.
[n] J. Blanco, R. Schmidt, and N. A. Tahir, “An Experiment at SPS-HiRadMat as a Tool to Study Beam-Matter Interaction”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD67, pp. 259-262.
[n] J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
[n] B. Bolzon et al., “Linear Collider Final Doublet Considerations: ATF2 Vibration Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP087, pp. 3654-3656.
[n] C. Carli, M. Aiba, M. Chanel, B. Goddard, M. Martini, and W. J. M. Weterings, “Lattice Issues of the CERN PSB with H- Charge Exchange Injection Hardware”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP036, pp. 3781-3783.
[n] D. Raparia, Y. Y. Lee, W. T. Weng, and J. Wei, “Procedure for Setting Up The Transfer Lines for The SNS”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU415, pp. 338-340.
[n] S. Mallows, E. B. Holzer, and J. W. van Hoorne, “Fiber Based BLM System Research and Development at CERN”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3C05, pp. 596-600.
[n] N. Iida, T. Kamitani, M. Kikuchi, Y. Ogawa, and K. Oide, “Design of the Positron Transport System for SuperKEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD004, pp. 4284-4286.
[n] N. Chauvin, O. Delferriere, R. Gobin, P. A. P. Nghiem, D. Uriot, and R. D. Duperrier, “Simulations and Measurements in High Intensity LEBT with Space Charge Compensation”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3A03, pp. 507-510.
[n] N. Mahdizadeh and F. M. Aghamir, “Comparison of Growth Rates of Two-Stream Free Electron Lasers (TSFEL) with Planar Wiggler Magnet and AC Electrical Wiggler Pumps”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC21, pp. 136-137.
[n] F. Asvesta et al., “Characterization of transverse profiles along the LHC injector chain at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3490-3493. doi:10.18429/JACoW-IPAC2023-WEPL158
[n] K. Yajima et al., “Generation of Quasimonochromatic Resonant Transition”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D012, pp. 695-697.
[n] N. M. Lockmann, C. Gerth, P. Peier, B. Schmidt, and S. Wesch, “A Non-Invasive THz Spectrometer for Bunch Length Characterization at European XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2495-2497. doi:10.18429/JACoW-IPAC2019-WEPGW014
[n] I. Ben-Zvi and F. Gerigk, “ERL17 Workshop, WG4 Summary: Superconducting RF”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 81-82. doi:10.18429/JACoW-ERL2017-FRIBCC004
[n] R. B. Palmer, “Laser Driven Electron Accelerators”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3370-3375.
[n] J. Tang et al., “Injection System Design for the CSNS/RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS118, pp. 1783-1785.
[n] R. B. Palmer, J. S. Berg, and D. Stratakis, “A Planar Snake Muon Ionization Cooling Lattice”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO05, pp. 1307-1309.
[n] P. R. Hanley and N. Wells, “Production of Intense Proton Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 182-185.
[n] S. Hirlaender et al., “Automatisation of the SPS ElectroStatic Septa Alignment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4001-4004. doi:10.18429/JACoW-IPAC2019-THPRB080
[n] A. Presland, B. Goddard, and W. J. M. Weterings, “The Performance of the New TCDQ System in the LHC Beam Dumping Region”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP013, pp. 1324-1326.
[n] K. Fan, K. Ishii, H. Matsumoto, and N. Matsumoto, “Development of a High Radiation Resistant Septum for JPARC Main Ring Injection System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB010, pp. 298-300.
[n] E. Fagotti et al., “Installation and first beam of SPES source at INFN-LNL”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THBZ04, pp. XX-XX.
[n] F. Bouly, M. A. Baylac, A. Gatera, and D. Uriot, “Superconducting LINAC Design Upgrade in View of the 100 MeV MYRRHA Phase I”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 837-840. doi:10.18429/JACoW-IPAC2019-MOPTS003
[n] J. Qiang and J. Wu, “Generation of Atto-Second Water Window Coherent X-Ray Radiation Through Modulation Compression”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPB17, pp. 290-293.
[n] P. Marchand, “Optimisation Studies of the Planned Paul Scherrer Institute Electron Gun Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 852-855.
[n] K. Yokoyama and T. Kamitani, “Energy Equalization by using S-band and X-band Accelerator Modules”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA066, pp. 205-207.
[n] N. Pichoff, R. Duperrier, and D. Uriot, “Beam Dynamics through the CONCERT-ESS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH013, pp. 2869-2871.
[n] H. Kobayashi, T. Adachi, T. Kawakubo, and X. Liu, “SI-Thyristor Matrix Array Driven Electrostatic Injection Kicker for the KEK Digital Accelerator and Beam Dynamics Analysis of Injection”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA26, pp. 101-103.
[n] A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2540-2543. doi:10.18429/JACoW-IPAC2021-WEXB05
[n] W. Joho, P. Marchand, L. Rivkin, and A. Streun, “Desing of a Swiss Ligh Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 627-630.
[n] V. Schlott et al., “Commissioning of the SLS-Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A21, pp. 851-853.
[n] D. M. Grudzien, Y. Kang, R. Kustom, P. Matthews, and A. Nassiri, “Superconducting Nb Accelerating Structure for a 50-MeV mm-wave Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2051-2054.
[n] S. C. P. Albright, F. Antoniou, F. Asvesta, H. Bartosik, C. Bracco, and E. Renner, “New Longitudinal Beam Production Methods in the CERN Proton Synchrotron Booster”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4130-4133. doi:10.18429/JACoW-IPAC2021-THPAB183
[n] Y. Kang, J. Song, and R. Kustom, “A Microwave Beam Waveguide Undulator for a Brilliant Above 100 KeV Photon Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR6, pp. 168-170.
[n] C. Lingwood, G. Burt, K. Gunn, and J. D. A. Smith, “Evolutionary Algorithms in the Design of Crab Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC056, pp. 1850-1852.
[n] M. Debongnie et al., “Modelization of an Injector With Machine Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3096-3099. doi:10.18429/JACoW-IPAC2019-WEPTS006
[n] N. Wells and P. R. Hanley, “Inert Gas Ion Beams from a Duoplasmatron Ion Source”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 43-46.
[n] S. Matsumoto, T. Higo, K. Kakihara, T. Kamitani, and M. Tanaka, “Large-aperture Travelling-wave Accelerator Structure for Positron Capture of SuperKEKB Injector Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3872-3874. doi:10.18429/JACoW-IPAC2014-THPRI047
[n] M. Kikuchi et al., “Design of Positron Damping Ring for Super-KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB054, pp. 1641-1643.
[n] P. Wang, H. B. Chen, J. Shi, and S. X. Zheng, “Design and Beam Dynamics Study of a C-Band Deflecting Cavity for Bunch Length Measurement”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH06, pp. 35-37.
[n] C. D. Beard and J. D. A. Smith, “Numerical Calculations of Collimator Insertions”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS070, pp. 709-711.
[n] M. Tanigaki et al., “Construction of FFAG Accelerators in KURRI for ADS Study”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAB004, pp. 350-352.
[n] M. Yoshioka, H. Matsumoto, Shigeru. Takeda, Y. Takeuchi, M. Tawada, and Y. Ishikawa, “Development of a Temperature Control System for Large Scale Electron-Positron Colliders”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D070, pp. 260-262.
[n] C. E. Hill, D. Kuechler, H. Kugler, and R. Scrivens, “Options for Upgrading The Intensity of The CERN Lead Pre-Injector Ion Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO448, pp. 148-150.
[n] L. Z. Liang, C. D. Hu, and J. L. Wei, “The Study of a Calculation Method for Measurement of Diagnostic Neutral Beam Property”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO024, pp. 1934-1936.
[n] C. S. Derrez et al., “Wire Scanner Systems at the European Spallation Source (ESS): Tests and First Beam Commissioning Results”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 372-375. doi:10.18429/JACoW-LINAC2022-TUPOJO13
[n] T. Nakanishi et al., “Highly Polarized Electron Source Development in Japan”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D052, pp. 208-210.
[n] B. Cauvin, M. Desmons, J. Girard, and P. Letonturier, “Long Term Performance on the Superconducting Cavities of the Saclay Heavy Ion Linac”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I44, pp. XX-XX.
[n] L. S?©by, G. Baud, M. Bozzolan, and R. Scrivens, “New Beam Position Monitors for the CERN LINAC3 to LEIR Ion Beam Transfer Line”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 293-296. doi:10.18429/JACoW-IBIC2018-TUPB14
For LaTeX
Use Complete Form
For BibTeX
References
- D. J. Summers, J. S. Berg, A. A. Garren, and R. B. Palmer, “A Very Fast Ramping Muon Synchrotron for a Neutrino Factory”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB092, pp. 1804-1806.
- M. Kuriki et al., “FEL Enhancement by Microbuch Structure Made with Phase-Space Rotation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1570-1572.
- M. Schaumann and J. M. Jowett, “Bunch-by-Bunch Analysis of the LHC Heavy-Ion Luminosity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI025, pp. 1391-1393.
- F. E. Mills, “ISABELLE Design Study”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1036-1039.
- S. Takano et al., “Beam-Based Calibration of Sextupole Magnet Displacement with Betatron Tune Shift”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 192-195.
- O. Naumann and J. Jacob, “Fractional Filling Induced Landau Damping of Longitudinal Instabilities at the ESRF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B007, pp. 1551-1553.
- V. Veshcherevich and S. Belomestnykh, “Buncher Cavity for ERL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB008, pp. 1198-1200.
- F. Lucas Rodriguez, I. Atanassov, P. Palazzi, and F. Ravotti, “The TOTEM Detector Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP049, pp. 197-199.
- J. W. Kim and H. Kim, “Quality Factor Measurement Method Using Multi Decay Time Constants on Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1011-1013.
- Y. Mori, S. Fukumoto, K. Ikegami, and A. Takagi, “KEK Optically Pumped Polarized H- Ion Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1779-1782.
- A. Andrighetto et al., “The SPES RIB Production Complex”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUA2C03, pp. 160-162.
- J. D. Fox et al., “A 4.2 GS/s Synchronized Vertical Excitation System for SPS Studies - Steps Toward Wideband Feedback”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR090, pp. 3144-3146.
- J. Blanco, R. Schmidt, and N. A. Tahir, “An Experiment at SPS-HiRadMat as a Tool to Study Beam-Matter Interaction”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD67, pp. 259-262.
- J. Jacob et al., “Successful Beam Test of the HOM Free Superconducting SOLEIL Cavity Prototype at the ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB057, pp. 1332-1334.
- B. Bolzon et al., “Linear Collider Final Doublet Considerations: ATF2 Vibration Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP087, pp. 3654-3656.
- C. Carli, M. Aiba, M. Chanel, B. Goddard, M. Martini, and W. J. M. Weterings, “Lattice Issues of the CERN PSB with H- Charge Exchange Injection Hardware”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP036, pp. 3781-3783.
- D. Raparia, Y. Y. Lee, W. T. Weng, and J. Wei, “Procedure for Setting Up The Transfer Lines for The SNS”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU415, pp. 338-340.
- S. Mallows, E. B. Holzer, and J. W. van Hoorne, “Fiber Based BLM System Research and Development at CERN”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3C05, pp. 596-600.
- N. Iida, T. Kamitani, M. Kikuchi, Y. Ogawa, and K. Oide, “Design of the Positron Transport System for SuperKEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD004, pp. 4284-4286.
- N. Chauvin, O. Delferriere, R. Gobin, P. A. P. Nghiem, D. Uriot, and R. D. Duperrier, “Simulations and Measurements in High Intensity LEBT with Space Charge Compensation”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3A03, pp. 507-510.
- N. Mahdizadeh and F. M. Aghamir, “Comparison of Growth Rates of Two-Stream Free Electron Lasers (TSFEL) with Planar Wiggler Magnet and AC Electrical Wiggler Pumps”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC21, pp. 136-137.
- F. Asvesta et al., “Characterization of transverse profiles along the LHC injector chain at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL158, pp. 3490-3493.
- K. Yajima et al., “Generation of Quasimonochromatic Resonant Transition”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D012, pp. 695-697.
- N. M. Lockmann, C. Gerth, P. Peier, B. Schmidt, and S. Wesch, “A Non-Invasive THz Spectrometer for Bunch Length Characterization at European XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2495-2497.
- I. Ben-Zvi and F. Gerigk, “ERL17 Workshop, WG4 Summary: Superconducting RF”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 81-82.
- R. B. Palmer, “Laser Driven Electron Accelerators”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3370-3375.
- J. Tang et al., “Injection System Design for the CSNS/RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS118, pp. 1783-1785.
- R. B. Palmer, J. S. Berg, and D. Stratakis, “A Planar Snake Muon Ionization Cooling Lattice”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO05, pp. 1307-1309.
- P. R. Hanley and N. Wells, “Production of Intense Proton Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 182-185.
- S. Hirlaender et al., “Automatisation of the SPS ElectroStatic Septa Alignment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4001-4004.
- A. Presland, B. Goddard, and W. J. M. Weterings, “The Performance of the New TCDQ System in the LHC Beam Dumping Region”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP013, pp. 1324-1326.
- K. Fan, K. Ishii, H. Matsumoto, and N. Matsumoto, “Development of a High Radiation Resistant Septum for JPARC Main Ring Injection System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB010, pp. 298-300.
- E. Fagotti et al., “Installation and first beam of SPES source at INFN-LNL”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THBZ04, pp. XX-XX.
- F. Bouly, M. A. Baylac, A. Gatera, and D. Uriot, “Superconducting LINAC Design Upgrade in View of the 100 MeV MYRRHA Phase I”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 837-840.
- J. Qiang and J. Wu, “Generation of Atto-Second Water Window Coherent X-Ray Radiation Through Modulation Compression”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPB17, pp. 290-293.
- P. Marchand, “Optimisation Studies of the Planned Paul Scherrer Institute Electron Gun Test Facility”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 852-855.
- K. Yokoyama and T. Kamitani, “Energy Equalization by using S-band and X-band Accelerator Modules”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA066, pp. 205-207.
- N. Pichoff, R. Duperrier, and D. Uriot, “Beam Dynamics through the CONCERT-ESS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH013, pp. 2869-2871.
- H. Kobayashi, T. Adachi, T. Kawakubo, and X. Liu, “SI-Thyristor Matrix Array Driven Electrostatic Injection Kicker for the KEK Digital Accelerator and Beam Dynamics Analysis of Injection”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA26, pp. 101-103.
- A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2540-2543.
- W. Joho, P. Marchand, L. Rivkin, and A. Streun, “Desing of a Swiss Ligh Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 627-630.
- V. Schlott et al., “Commissioning of the SLS-Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A21, pp. 851-853.
- D. M. Grudzien, Y. Kang, R. Kustom, P. Matthews, and A. Nassiri, “Superconducting Nb Accelerating Structure for a 50-MeV mm-wave Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2051-2054.
- S. C. P. Albright, F. Antoniou, F. Asvesta, H. Bartosik, C. Bracco, and E. Renner, “New Longitudinal Beam Production Methods in the CERN Proton Synchrotron Booster”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4130-4133.
- Y. Kang, J. Song, and R. Kustom, “A Microwave Beam Waveguide Undulator for a Brilliant Above 100 KeV Photon Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR6, pp. 168-170.
- C. Lingwood, G. Burt, K. Gunn, and J. D. A. Smith, “Evolutionary Algorithms in the Design of Crab Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC056, pp. 1850-1852.
- M. Debongnie et al., “Modelization of an Injector With Machine Learning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3096-3099.
- N. Wells and P. R. Hanley, “Inert Gas Ion Beams from a Duoplasmatron Ion Source”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 43-46.
- S. Matsumoto, T. Higo, K. Kakihara, T. Kamitani, and M. Tanaka, “Large-aperture Travelling-wave Accelerator Structure for Positron Capture of SuperKEKB Injector Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3872-3874.
- M. Kikuchi et al., “Design of Positron Damping Ring for Super-KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB054, pp. 1641-1643.
- P. Wang, H. B. Chen, J. Shi, and S. X. Zheng, “Design and Beam Dynamics Study of a C-Band Deflecting Cavity for Bunch Length Measurement”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH06, pp. 35-37.
- C. D. Beard and J. D. A. Smith, “Numerical Calculations of Collimator Insertions”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS070, pp. 709-711.
- M. Tanigaki et al., “Construction of FFAG Accelerators in KURRI for ADS Study”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAB004, pp. 350-352.
- M. Yoshioka, H. Matsumoto, Shigeru. Takeda, Y. Takeuchi, M. Tawada, and Y. Ishikawa, “Development of a Temperature Control System for Large Scale Electron-Positron Colliders”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D070, pp. 260-262.
- C. E. Hill, D. Kuechler, H. Kugler, and R. Scrivens, “Options for Upgrading The Intensity of The CERN Lead Pre-Injector Ion Source”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO448, pp. 148-150.
- L. Z. Liang, C. D. Hu, and J. L. Wei, “The Study of a Calculation Method for Measurement of Diagnostic Neutral Beam Property”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO024, pp. 1934-1936.
- C. S. Derrez et al., “Wire Scanner Systems at the European Spallation Source (ESS): Tests and First Beam Commissioning Results”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 372-375.
- T. Nakanishi et al., “Highly Polarized Electron Source Development in Japan”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D052, pp. 208-210.
- B. Cauvin, M. Desmons, J. Girard, and P. Letonturier, “Long Term Performance on the Superconducting Cavities of the Saclay Heavy Ion Linac”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I44, pp. XX-XX.
- L. S?©by, G. Baud, M. Bozzolan, and R. Scrivens, “New Beam Position Monitors for the CERN LINAC3 to LEIR Ion Beam Transfer Line”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 293-296.
Back to search