JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. J. Barnes and G. D. Wait, “Results of Calculations on the Beam Deflection Due to the 1 MHz Chopper for the Koan Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 967-970. 
[n]	K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46. 
[n]	N. Andreev et al., “The 1 m Long Single Aperture Dipole Coil Test Program for LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP027G, pp. 2258-2260. 
[n]	V. P. Suller et al., “Status of the CAMD Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE050, pp. 3103-3105. 
[n]	M. Sapinski et al., “Estimation of Thresholds for the Signals of the BLMs around the LHC Final Focus Triplet Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR037, pp. 4053-4055. 
[n]	R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1580-1583. 
[n]	M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848. 
[n]	H. H. Braun, S. Rosander, and M. Valentini, “Second Order Beam-Loading Compensation in the Drive-Beam Accelerator of the CLIC Test Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B04, pp. 510-512. 
[n]	V. N. Litvinenko, “Performance of High Intensity γ-Rays Source Driven by the Duke Storage Ring FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA010, pp. 657-659. 
[n]	M. J. Barnes, F. Caspers, L. Ducimetiere, N. Garrel, and T. Kroyer, “An Improved Beam Screen for the LHC Injection Kickers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN086, pp. 1574-1576. 
[n]	Y.-N. Rao and R. A. Baartman, “Transverse Phase Space Tomography in TRIUMF Injection Beamline”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC064, pp. 1144-1146. 
[n]	H. H. J. Ten Kate et al., “Development of a 10 T Nb3Sn Twin Aperture Model Dipole Magnet for the CERN LHC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1157-1160. 
[n]	J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3782-3784. doi:10.18429/JACoW-IPAC2023-WEPM089
[n]	C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3779-3781. doi:10.18429/JACoW-IPAC2023-WEPM088
[n]	S. F. Mikhailov, V. N. Litvinenko, and Y. Wu, “Low Emittance Lattices for the Duke FEL Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH125, pp. 3528-3530. 
[n]	J. Takacs, “Beam Scanner for the Oxford Electrostatic Tandem Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 980-985. 
[n]	B. Dehning, G. Mugnai, and F. Roncarolo, “High Accuracy Field Mappings with a Laser Monitored Travelling Mole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B09, pp. 409-411. 
[n]	R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395. 
[n]	S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1696-1699. 
[n]	V. N. Litvinenko, S. H. Park, Y. Wu, and I. V. Pinayev, “The Duke XUV FEL Storage Ring Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D066, pp. 834-836. 
[n]	L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX. 
[n]	R. K. Bhandari, “Status of the Calcutta K500 Superconduction Cyclotron Project”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-4, pp. XX-XX. 
[n]	Y. Yano, A. Goto, M. Kase, and T. Katayama, “RI Beam Factory Project at RIKEN”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-1, pp. XX-XX. 
[n]	U. Bartz, D. Ficek, N. Mueller, A. Schempp, J. Thibus, and M. Vossberg, “The Frankfurt Funneling Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS037, pp. 1574-1576. 
[n]	D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX. 
[n]	J. G. Alessi et al., “Construction of the BNL EBIS Preinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP025, pp. 407-409. 
[n]	H. Chen, C.-W. Chen, T.-Y. Chung, and F.-Y. Lin, “Development of Hall probe system for accurate field mapping at NSRRC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3815-3818. doi:10.18429/JACoW-IPAC2023-WEPM106

For LaTeX

Use Complete Form

For BibTeX

References

Back to search