Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Borland, T. G. Berenc, R. R. Lindberg, V. Sajaev, and Y. P. Sun, “Lower Emittance Lattice for the Advanced Photon Source Upgrade Using Reverse Bending Magnets”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 877-880. doi:10.18429/JACoW-NAPAC2016-WEPOB01
[n] M. Q. Barton, “Application of an On-Line Computer to Accelerator Studies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 335-336.
[n] W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1593-1598.
[n] B. Shin, C.-K. Sung, C. Kim, I. Nam, and M. Chung, “Electron beam test to the multi-stripline-based non-destructive energy spread monitor for the PAL-XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA007, unpublished.
[n] B. C. Kuske et al., “Incorporation of a MESA Linac Modules into BERLinPro”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1449-1452. doi:10.18429/JACoW-IPAC2019-TUPGW023
[n] R. Gebel, “NEGATIVE ION SOURCES AT THE INJECTOR CYCLOTRON FOR THE COOLER SYNCHROTRON COSY/J?£LICH”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P16, pp. XX-XX.
[n] X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB048, unpublished.
[n] D. Baca, E. Chacon-Golcher, J. Kwan, and J. K. Wu, “Fabrication of Large Diameter Alumino-Silicate K+ Sources”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB005, pp. 3294-3296.
[n] Y. P. Sun, “Multi-Objective Online Optimization of Beam Lifetime at APS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 913-915. doi:10.18429/JACoW-NAPAC2016-WEPOB12
[n] A. Yamaguchi et al., “2D TRACKING CODE FOR DRIFT TUBE LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3482-3484. doi:10.18429/JACoW-IPAC2019-THPMP014
[n] J. Stackhouse et al., “Optimization of laser coupling into optically field ionized plasma channels for laser-plasma acceleration”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR52, unpublished.
[n] A. Hillman, J. Carwardine, and G. Sprau, “Magnet Power Supply Reliability at the Advanced Photon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH002, pp. 3657-3659.
[n] A. Dick et al., “Coupling of codes for modeling high-energy-density conditions in fourth generation light sources”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS076, unpublished.
[n] R. Perry, “Some Thoughts Related to Cryogenic Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-15, pp. 206-208.
[n] M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 745-748.
[n] H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
[n] S. Hashimoto et al., “First Observation of Quasiperiodic Undulator Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP061G, pp. 2549-2551.
[n] Y. P. Sun, M. Borland, R. R. Lindberg, and V. Sajaev, “APS-U Lattice Design for Off-Axis Accumulation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 920-923. doi:10.18429/JACoW-NAPAC2016-WEPOB14
[n] P. Manwani et al., “Excitation of Very High Gradient Plasma Wakefields From Nanometer Scale Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1806-1809. doi:10.18429/JACoW-IPAC2022-WEPOST048
[n] R. Schmitz, “What's behind an Accelerator-Control-System?”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOMA04, pp. 13-15.
[n] S. Humphries, “Xenos: X-Ray Monte Carlo Code Suite”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2766-2768. doi:10.18429/JACoW-IPAC2021-WEPAB075
[n] T. Stengler, K. Aulenbacher, F. Hug, and S. D. W. Thomas, “SRF testing for Mainz Energy Recovering Superconducting Accelerator MESA”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 508-512. doi:10.18429/JACoW-SRF2019-TUP041
[n] F. Brinker, “Precision Alignment of BPM's with Quadrupole Magnets”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP67, pp. 502-504.
[n] J. R. Zagel, V. K. Bharadwaj, J. M. Smolucha, and T. M. Watts, “Tuning Loop Control System for the Fermilab Debuncher DRF1 Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 794-797.
[n] S. Kawatsu et al., “Feasibility Study on Superconducting System for Intense CW Ion Linac”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP092L, pp. 2132-2136.
[n] V. Sajaev, M. Borland, Y. P. Sun, and A. Xiao, “Simulation Study of the Helical Superconducting Undulator Installation at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 907-909. doi:10.18429/JACoW-NAPAC2016-WEPOB10
[n] R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
[n] H. J. Choi, K. H. Gil, H.-S. Kang, S. H. Kim, and K. W. Seo, “Introduction to BINP HLS to Measure Vertical Changes on PAL-XFEL Buildings and Ground”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 994-997. doi:10.18429/JACoW-IPAC2015-MOPTY028
[n] R. F. Lambiase, B. Oerter, and J. Smith, “Power Supply Control for the Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B17, pp. 2211-2213.
[n] Y. Senichev et al., “Electron Cooled Beam Losses Phenomena in COSY”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO1C06, pp. 649-653.
[n] Y. L. Wang, T. Emoto, M. Nomura, I. Sato, and S. Toyama, “A Novel Chopper System with Very Little Emittance Growth”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1373-1376.
[n] M. Sessler, C. Turner, and S. Wurtele, “Control of Longitudinal Collective Behavior in the Muon Collider Rings”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W033, pp. 422-424.
[n] Y. Ma, A. N. Koveshnikov, D. Lang, R. E. Laxdal, and N. Muller, “Thermosiphon Cooling Loops for ARIEL Cryomodules”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 309-311. doi:10.18429/JACoW-SRF2017-MOPB105
[n] R. Jiang and Y. B. Leng, “Application of Clustering by Fast Search and Find of Density Peaks to Beam Diagnostics at SSRF”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2581-2583. doi:10.18429/JACoW-IPAC2019-WEPGW045
[n] Y. P. Sun, “Online Minimization of Vertical Beam Sizes at APS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 916-919. doi:10.18429/JACoW-NAPAC2016-WEPOB13
[n] S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
[n] M. C. Wilson, K. A. R. Baker, E. V. Buckley, M. T. Heron, and J. R. Alexander, “Diamond Personnel Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP515, pp. XX-XX.
[n] Y. L. Wang, T. Emoto, M. Nomura, S. T??yama, and I. Sato, “A Novel Chopper System for High Power CW Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-61, pp. 205-207.
[n] M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX.
[n] L. N. Blumberg, J. B. Murphy, and M. F. Reusch, “Lattice Properties of the Phase I BNL X-Ray Lithography Source Obtained from Fits to Magnetic Measurement Data”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2664-2667.
[n] P. Baudrenghien et al., “The New RF Control System for the CERN SPS Accelerator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP015L, pp. 1757-1759.
[n] Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806.
[n] D. Arnold et al., “Power Couplers Design for Third Harmonic and Spoke Cavities at Fermilab”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP50, pp. 580-582.
[n] I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
[n] Y. Kato, T. Iida, and F. Sato, “Large Bore ECR Ion Source with Cylindorically Comb-Shaped Magnetic Fields Configuration”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-03, pp. 326-330.
[n] M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
[n] J. Cuperus, “An Interactive Alarm System for the CERN PS Accelerator Complex”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2337-2340.
[n] R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
[n] D. Li, S. Amano, K. Horikawa, K. Imasaki, S. Miyamoto, and T. Mochizuki, “Experiment on Iodine Transmutation through High-Energy Gamma Ray”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC26, pp. 558-560.
[n] C. F. Chan and J. W. Staples, “A Compact Double Einzel Lens LEBT with Steering for H+ Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-98, pp. 594-596.
[n] M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n] G. S. Levine and G. W. Bennett, “The Brookhaven AGS Radiation Monitoring Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 734-736.
[n] D. Winklehner, J. R. Alonso, J. M. Conrad, and R. W. Hamm, “An RFQ Direct Injection Scheme for the IsoDAR High Intensity H2+ Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3384-3386. doi:10.18429/JACoW-IPAC2015-WEPTY048
[n] E. Jones, F. Rohner, J. C. Schnuriger, T. R. Sherwood, and S. van der Meer, “Antiproton Production and Collection for the CERN Antiproton Accumulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2778-2781.
[n] H. Ohtsuka et al., “Research and Development for the 8 GeV Booster Synchrotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 412-415.
[n] J. Olivares Herrador, A. Latina, B. Gimeno-Martinez, D. Esperante Pereira, N. Fuster-Martinez, and Y. Zhao, “Simulation of beam loading compensation with RF-Track”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3136-3139. doi:10.18429/JACoW-IPAC2024-THPC56
[n] J. Norem, M. Knott, and A. Rauchas, “Beam Stabillity in a 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1883-1886.
[n] P. J. Channell, “The Moment Approach to Charged Particle Beam Dynamics”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2607-2610.
[n] M. K. Dey, P. R. Sarma, and R. K. Bhandari, “A Group of Codes for Finding the Pole Profile in Quadrupoles With High Field Quality”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-23, pp. XX-XX.
[n] D. Winklehner, “Updated Physics Design of the DAEALUS and IsoDAR Coupled Cyclotrons for High Intensity H2+ Beam Production”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 137-139. doi:10.18429/JACoW-Cyclotrons2016-TUB02
[n] Y. Nakazawa et al., “Development of Inter-Digital H-Mode Drift-Tube Linac Prototype with Alternative Phase Focusing for a Muon Linac in the J-PARC Muon G-2/EDM Experiment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 606-609. doi:10.18429/JACoW-IPAC2019-MOPRB017
For LaTeX
Use Complete Form
For BibTeX
References
- M. Borland, T. G. Berenc, R. R. Lindberg, V. Sajaev, and Y. P. Sun, “Lower Emittance Lattice for the Advanced Photon Source Upgrade Using Reverse Bending Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 877-880.
- M. Q. Barton, “Application of an On-Line Computer to Accelerator Studies”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 335-336.
- W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1593-1598.
- B. Shin, C.-K. Sung, C. Kim, I. Nam, and M. Chung, “Electron beam test to the multi-stripline-based non-destructive energy spread monitor for the PAL-XFEL”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA007, unpublished.
- B. C. Kuske et al., “Incorporation of a MESA Linac Modules into BERLinPro”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1449-1452.
- R. Gebel, “NEGATIVE ION SOURCES AT THE INJECTOR CYCLOTRON FOR THE COOLER SYNCHROTRON COSY/J?£LICH”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P16, pp. XX-XX.
- X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB048, this conference.
- D. Baca, E. Chacon-Golcher, J. Kwan, and J. K. Wu, “Fabrication of Large Diameter Alumino-Silicate K+ Sources”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB005, pp. 3294-3296.
- Y. P. Sun, “Multi-Objective Online Optimization of Beam Lifetime at APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 913-915.
- A. Yamaguchi et al., “2D TRACKING CODE FOR DRIFT TUBE LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3482-3484.
- J. Stackhouse et al., “Optimization of laser coupling into optically field ionized plasma channels for laser-plasma acceleration”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR52, unpublished.
- A. Hillman, J. Carwardine, and G. Sprau, “Magnet Power Supply Reliability at the Advanced Photon Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH002, pp. 3657-3659.
- A. Dick et al., “Coupling of codes for modeling high-energy-density conditions in fourth generation light sources”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS076, this conference.
- R. Perry, “Some Thoughts Related to Cryogenic Linacs”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-15, pp. 206-208.
- M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 745-748.
- H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
- S. Hashimoto et al., “First Observation of Quasiperiodic Undulator Radiation”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP061G, pp. 2549-2551.
- Y. P. Sun, M. Borland, R. R. Lindberg, and V. Sajaev, “APS-U Lattice Design for Off-Axis Accumulation”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 920-923.
- P. Manwani et al., “Excitation of Very High Gradient Plasma Wakefields From Nanometer Scale Beams”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1806-1809.
- R. Schmitz, “What's behind an Accelerator-Control-System?”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOMA04, pp. 13-15.
- S. Humphries, “Xenos: X-Ray Monte Carlo Code Suite”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2766-2768.
- T. Stengler, K. Aulenbacher, F. Hug, and S. D. W. Thomas, “SRF testing for Mainz Energy Recovering Superconducting Accelerator MESA”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 508-512.
- F. Brinker, “Precision Alignment of BPM's with Quadrupole Magnets”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP67, pp. 502-504.
- J. R. Zagel, V. K. Bharadwaj, J. M. Smolucha, and T. M. Watts, “Tuning Loop Control System for the Fermilab Debuncher DRF1 Cavities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 794-797.
- S. Kawatsu et al., “Feasibility Study on Superconducting System for Intense CW Ion Linac”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP092L, pp. 2132-2136.
- V. Sajaev, M. Borland, Y. P. Sun, and A. Xiao, “Simulation Study of the Helical Superconducting Undulator Installation at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 907-909.
- R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
- H. J. Choi, K. H. Gil, H.-S. Kang, S. H. Kim, and K. W. Seo, “Introduction to BINP HLS to Measure Vertical Changes on PAL-XFEL Buildings and Ground”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 994-997.
- R. F. Lambiase, B. Oerter, and J. Smith, “Power Supply Control for the Spallation Neutron Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B17, pp. 2211-2213.
- Y. Senichev et al., “Electron Cooled Beam Losses Phenomena in COSY”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO1C06, pp. 649-653.
- Y. L. Wang, T. Emoto, M. Nomura, I. Sato, and S. Toyama, “A Novel Chopper System with Very Little Emittance Growth”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1373-1376.
- M. Sessler, C. Turner, and S. Wurtele, “Control of Longitudinal Collective Behavior in the Muon Collider Rings”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W033, pp. 422-424.
- Y. Ma, A. N. Koveshnikov, D. Lang, R. E. Laxdal, and N. Muller, “Thermosiphon Cooling Loops for ARIEL Cryomodules”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 309-311.
- R. Jiang and Y. B. Leng, “Application of Clustering by Fast Search and Find of Density Peaks to Beam Diagnostics at SSRF”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2581-2583.
- Y. P. Sun, “Online Minimization of Vertical Beam Sizes at APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 916-919.
- S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548.
- M. C. Wilson, K. A. R. Baker, E. V. Buckley, M. T. Heron, and J. R. Alexander, “Diamond Personnel Safety System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP515, pp. XX-XX.
- Y. L. Wang, T. Emoto, M. Nomura, S. T??yama, and I. Sato, “A Novel Chopper System for High Power CW Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-61, pp. 205-207.
- M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX.
- L. N. Blumberg, J. B. Murphy, and M. F. Reusch, “Lattice Properties of the Phase I BNL X-Ray Lithography Source Obtained from Fits to Magnetic Measurement Data”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2664-2667.
- P. Baudrenghien et al., “The New RF Control System for the CERN SPS Accelerator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP015L, pp. 1757-1759.
- Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806.
- D. Arnold et al., “Power Couplers Design for Third Harmonic and Spoke Cavities at Fermilab”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP50, pp. 580-582.
- I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
- Y. Kato, T. Iida, and F. Sato, “Large Bore ECR Ion Source with Cylindorically Comb-Shaped Magnetic Fields Configuration”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-03, pp. 326-330.
- M. Kreider and T. Fleck, “FAIR Timing Master”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL011, pp. 50-52.
- J. Cuperus, “An Interactive Alarm System for the CERN PS Accelerator Complex”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2337-2340.
- R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
- D. Li, S. Amano, K. Horikawa, K. Imasaki, S. Miyamoto, and T. Mochizuki, “Experiment on Iodine Transmutation through High-Energy Gamma Ray”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC26, pp. 558-560.
- C. F. Chan and J. W. Staples, “A Compact Double Einzel Lens LEBT with Steering for H+ Beams”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-98, pp. 594-596.
- M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS10, pp. 2713-2716.
- G. S. Levine and G. W. Bennett, “The Brookhaven AGS Radiation Monitoring Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 734-736.
- D. Winklehner, J. R. Alonso, J. M. Conrad, and R. W. Hamm, “An RFQ Direct Injection Scheme for the IsoDAR High Intensity H2+ Cyclotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3384-3386.
- E. Jones, F. Rohner, J. C. Schnuriger, T. R. Sherwood, and S. van der Meer, “Antiproton Production and Collection for the CERN Antiproton Accumulator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2778-2781.
- H. Ohtsuka et al., “Research and Development for the 8 GeV Booster Synchrotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 412-415.
- J. Olivares Herrador, A. Latina, B. Gimeno-Martinez, D. Esperante Pereira, N. Fuster-Martinez, and Y. Zhao, “Simulation of beam loading compensation with RF-Track”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC56, pp. 3136-3139.
- J. Norem, M. Knott, and A. Rauchas, “Beam Stabillity in a 6 GeV Synchrotron Light Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1883-1886.
- P. J. Channell, “The Moment Approach to Charged Particle Beam Dynamics”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2607-2610.
- M. K. Dey, P. R. Sarma, and R. K. Bhandari, “A Group of Codes for Finding the Pole Profile in Quadrupoles With High Field Quality”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-23, pp. XX-XX.
- D. Winklehner, “Updated Physics Design of the DAEALUS and IsoDAR Coupled Cyclotrons for High Intensity H2+ Beam Production”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 137-139.
- Y. Nakazawa et al., “Development of Inter-Digital H-Mode Drift-Tube Linac Prototype with Alternative Phase Focusing for a Muon Linac in the J-PARC Muon G-2/EDM Experiment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 606-609.
Back to search