Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Takayanagi et al., “New Injection Bump Power Supply of the J-PARC RCS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2908-2910. doi:10.18429/JACoW-IPAC2015-WEPMA058
[n] V. M. Biryukov et al., “Experimental Study of Beam Collimation in Low Energy Proton Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6A04, pp. 1474-1476.
[n] P. Jain, H. Fukuma, K. Kanazawa, and Y. Suetsugu, “Analysis of the Measurement of Electron Cloud Density under Various Beam-optics Elements in KEKB LER”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC050, pp. 1835-1837.
[n] J. Yan et al., “Experimental Study of a Two-Color Storage Ring FEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1198-1200. doi:10.18429/JACoW-IPAC2015-MOPWI022
[n] I. V. Kalagin, S. N. Dmitriev, B. Gikal, and G. Gulbekyan, “Status of the FLNR JINR Cyclotrons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP099, pp. 5011-5013.
[n] A. R. D. Rodrigues et al., “SIRIUS ACCELERATORS STATUS REPORT”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1403-1406. doi:10.18429/JACoW-IPAC2015-TUPWA006
[n] W. J. M. Weterings et al., “160 MeV H- Injection into the CERN PSB”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN109, pp. 1628-1630.
[n] S. S. Gilardoni, S. Aumon, and M. Martini, “Study of Beam Losses at Transition Crossing at the CERN PS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC048, pp. 3086-3088.
[n] L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. IPAC'20, Caen, France, May 2020, pp. 11. doi:10.18429/JACoW-IPAC2020-MOVIR06
[n] R. Kato et al., “High Power Terahertz FEL at ISIR, Osaka University”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE030, pp. 2209-2211.
[n] T. Takayanagi et al., “Power Supply of the Pulse Steering Magnet for Changing the Painting Area between the MLF and the MR at J-PARC 3 GeV RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA008, pp. 681-683.
[n] A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73.
[n] I. V. Kalagin et al., “Status of JINR FLNR cyclotrons”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 23-27. doi:10.18429/JACoW-HIAT2018-MOOXA01
[n] X. R. Resende et al., “Study of a Pulsed Sextupole Magnet Injection System for LNLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC139, pp. 3212-3214.
[n] J. F. Bouteille, “A High Quality Power Supply at the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2335-2338.
[n] Y. Lei et al., “Tuning of a Tapered Ridge-Loaded Waveguide Coupler for a Drift Tube LINAC of the Compact Pulsed Hadron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2893-2895. doi:10.18429/JACoW-IPAC2019-WEPRB039
[n] E. Metral, M. Giovannozzi, G. Metral, M. Martini, and R. Steerenberg, “Measurements of Transverse Space-Charge Effects in the CERN Proton Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG013, pp. 2916-2918.
[n] G. X. Xia et al., “A Proposed Experimental Test of Proton-Driven Plasma Wakefield Acceleration Based on CERN SPS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBN5, pp. 718-720.
[n] Y. T. Oganessian et al., “Modernization of the U400 Cyclotron at the FLNR JINR”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10012, pp. XX-XX.
[n] K. Saito et al., “High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP033, pp. 288-291.
[n] S. F. Mikhailov, H. Hao, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Protection of VUV FEL Mirrors using Soft Orbit Bump at Duke FEL/HIGS facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA074, pp. 1301-1303.
[n] V. K. B. Olsen, E. Adli, L. D. Amorim, P. Muggli, and J. Vieira, “Loading of a Plasma-Wakefield Accelerator Section Driven by a Self-Modulated Proton Bunch”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2551-2554. doi:10.18429/JACoW-IPAC2015-WEPWA026
[n] V. Yu. Zaslavsky et al., “Development of Powerful Long-Pulse Terahertz Band FELs Based on Linear Induction Accelerators”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 91-93. doi:10.18429/JACoW-FEL2019-TUP021
[n] G. G. Gulbekyan et al., “Axial Injection Channel Of The Dc-350 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 60-62.
[n] M. Kodaira, O. Asai, N. Awaji, M. Haraguchi, and T. Kishimoto, “Performance of SORTEC 1-GeV Synchrotron Radiation Source Facility and Future Plan”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 203-206.
[n] S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
[n] A. Vivoli and M. Martini, “Intra-Beam Scattering in the CLIC Damping Rings”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE090, pp. 3557-3559.
[n] W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Takayanagi et al., “New Injection Bump Power Supply of the J-PARC RCS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2908-2910.
- V. M. Biryukov et al., “Experimental Study of Beam Collimation in Low Energy Proton Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6A04, pp. 1474-1476.
- P. Jain, H. Fukuma, K. Kanazawa, and Y. Suetsugu, “Analysis of the Measurement of Electron Cloud Density under Various Beam-optics Elements in KEKB LER”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC050, pp. 1835-1837.
- J. Yan et al., “Experimental Study of a Two-Color Storage Ring FEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1198-1200.
- I. V. Kalagin, S. N. Dmitriev, B. Gikal, and G. Gulbekyan, “Status of the FLNR JINR Cyclotrons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP099, pp. 5011-5013.
- A. R. D. Rodrigues et al., “SIRIUS ACCELERATORS STATUS REPORT”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1403-1406.
- W. J. M. Weterings et al., “160 MeV H- Injection into the CERN PSB”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN109, pp. 1628-1630.
- S. S. Gilardoni, S. Aumon, and M. Martini, “Study of Beam Losses at Transition Crossing at the CERN PS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC048, pp. 3086-3088.
- L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 11.
- R. Kato et al., “High Power Terahertz FEL at ISIR, Osaka University”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE030, pp. 2209-2211.
- T. Takayanagi et al., “Power Supply of the Pulse Steering Magnet for Changing the Painting Area between the MLF and the MR at J-PARC 3 GeV RCS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA008, pp. 681-683.
- A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73.
- I. V. Kalagin et al., “Status of JINR FLNR cyclotrons”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 23-27.
- X. R. Resende et al., “Study of a Pulsed Sextupole Magnet Injection System for LNLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC139, pp. 3212-3214.
- J. F. Bouteille, “A High Quality Power Supply at the ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2335-2338.
- Y. Lei et al., “Tuning of a Tapered Ridge-Loaded Waveguide Coupler for a Drift Tube LINAC of the Compact Pulsed Hadron Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2893-2895.
- E. Metral, M. Giovannozzi, G. Metral, M. Martini, and R. Steerenberg, “Measurements of Transverse Space-Charge Effects in the CERN Proton Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG013, pp. 2916-2918.
- G. X. Xia et al., “A Proposed Experimental Test of Proton-Driven Plasma Wakefield Acceleration Based on CERN SPS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBN5, pp. 718-720.
- Y. T. Oganessian et al., “Modernization of the U400 Cyclotron at the FLNR JINR”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10012, pp. XX-XX.
- K. Saito et al., “High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP033, pp. 288-291.
- S. F. Mikhailov, H. Hao, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Protection of VUV FEL Mirrors using Soft Orbit Bump at Duke FEL/HIGS facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA074, pp. 1301-1303.
- V. K. B. Olsen, E. Adli, L. D. Amorim, P. Muggli, and J. Vieira, “Loading of a Plasma-Wakefield Accelerator Section Driven by a Self-Modulated Proton Bunch”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2551-2554.
- V. Yu. Zaslavsky et al., “Development of Powerful Long-Pulse Terahertz Band FELs Based on Linear Induction Accelerators”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 91-93.
- G. G. Gulbekyan et al., “Axial Injection Channel Of The Dc-350 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 60-62.
- M. Kodaira, O. Asai, N. Awaji, M. Haraguchi, and T. Kishimoto, “Performance of SORTEC 1-GeV Synchrotron Radiation Source Facility and Future Plan”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 203-206.
- S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
- A. Vivoli and M. Martini, “Intra-Beam Scattering in the CLIC Damping Rings”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE090, pp. 3557-3559.
- W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
Back to search