Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] O. Calvo, J. Flanz, and T. Russ, “BPM Data Acquisition System for the Bates Pulse Stretcher Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1467-1470.
[n] D. Hoober and V. J. Buchanan, “Conversion of AGS Ring to Modular Construction”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 867-872.
[n] J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3908-3911. doi:10.18429/JACoW-IPAC2019-THPRB043
[n] Z. Li et al., “Advanced Modeling of RF Cavities and Components for e+e- Colliders”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E205, pp. 623-625.
[n] S. Brandenburg, L. P. Roobol, and M. Stokroos, “Sub-Harmonic Bunching With the AGOR Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-30, pp. XX-XX.
[n] V. Dobishuk, F. Alessio, S. Chernyshenko, O. Okhrimenko, and V. M. Pugatch, “RMS-R3 - Radiation Hard System for Beam, Background and Luminosity Monitoring at the Upgraded LHCb Experiment”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THPP02, unpublished.
[n] P. Mereu et al., “Design Details of the European Spallation Source Drift Tube LINAC”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 190-192. doi:10.18429/JACoW-LINAC2018-MOPO089
[n] J. Li, J. Feikes, P. Goslawski, M. Ries, M. Ruprecht, and T. Tydecks, “Beam Lifetime Optimization by Adjusting the Sextupoles at the MLS and BESSY”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2837-2839. doi:10.18429/JACoW-IPAC2016-WEPOW010
[n] J. Bojowald, J. Dietrich, H. Labus, H. Lawin, and I. Mohos, “Fast Kicker Extraction at COSY-J??lich”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B14, pp. 1708-1710.
[n] P. Quigley, S. Belomestnykh, and R. Kaplan, “Digital Cryogenic Control System for Superconducting RF Cavities in CESR”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG008, pp. 1437-1439.
[n] E. Baron and Ch. Ricaud, “Beam Foil Interaction Studies for the Future Stripper of GANIL”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 839-842.
[n] D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 477-479. doi:10.18429/JACoW-RUPAC2018-THPSC35
[n] R. C. York et al., “FRIB: A New Accelerator Facility for the Production of Rare Isotope Beams”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROAAU02, pp. 888-894.
[n] G. Mishra, M. Gehlot, R. Khullar, and B. Chilukamarri, “Progress in development and measurement of an asymmetric magnet pole undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3801-3803. doi:10.18429/JACoW-IPAC2023-WEPM101
[n] W. Song et al., “Study on transverse beam size measurement using Cherenkov diffraction radiation in low-energy electron accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4836-4838. doi:10.18429/JACoW-IPAC2023-THPL157
[n] Y. K. Ong, L. Bellan, A. Pisent, M. Comunian, and E. Fagotti, “Beam transfer lines design study for 30-40 mA proton beam for Boron Neutron Capture Therapy facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM110, unpublished.
[n] C. Widmann, A. Santamaria Garcia, A.-S. Mueller, C. Xu, E. Bruendermann, and J. Gethmann, “ROCK-IT – a demonstrator for automation and remote-access to synchrotron beamlines”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS86, unpublished.
[n] A. P. Sabersky, “Optical Beam Diagnostics on PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2162-2165.
[n] O. Naumann, K. Obermann, and T. Scholz, “Comparison between Impedance Measurements and Analytical Calculations”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1330-1333.
[n] B. S. Kim, K. R. Kim, J. S. Lee, and S.-Y. Lee, “Enhancement of Mechanical Properties of High Chromium Steel by Nitrogen Ion Implantation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH183, pp. 2361-2363.
[n] R. Schneider, J. Rainwater, and P. Yen, “Nevis Synchrocyclotron Conversion Program-RF System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 303-307.
[n] H. H. Kannowade, “Design of the New RF-System for the 600 MeV-Synchro Cyclotron at CERN”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 315-319.
[n] R. Khullar, M. Gehlot, H. Jeevakhan, S. M. Khan, and G. Mishra, “Laser Instrumentation and Insertion Device Measurement System”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2513-2516. doi:10.18429/JACoW-IPAC2022-THPOST030
[n] A. Sessler, “Einstein: His Impact on Accelerators; His Impact on the World”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOOB001, pp. XX-XX.
[n] H. J. Kim and T. Sen, “Recent Improvement of Tracking Code BBSIMC”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC022, pp. 304-307.
[n] L. A. Builta, J. C. Elliott, D. C. Moir, T. P. Starke, and C. A. Vecere, “PHERMEX Electron Gun Development”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2728-2731.
[n] H. Umezawa, M. Yamanaka, and N. Nishida, “Study on the strength of large grain sliced niobium discs”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS65, unpublished.
[n] W. C. Barkley et al., “First Results of the Analytical Method Used to Reduce Downtime Risk at an Accelerator Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4349-4351. doi:10.18429/JACoW-IPAC2019-THPTS103
[n] A. Ropert et al., “Accelerator Physics Trends at the ESRF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG05, pp. 167-170.
[n] A. Halavanau, D. Cocco, E. Hemsing, G. Marcus, D. S. Morton, and G. R. Wilcox, “Two Color Grating design for Soft X-Ray Self-Seeding at LCLS-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 361-364. doi:10.18429/JACoW-IPAC2021-MOPAB097
[n] C. Swain, A. Dixon, C. Welsch, and J. Wolfenden, “Synchrotron radiation simulations for the development of a coherent synchrotron radiation bunch length monitor”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3956-3958. doi:10.18429/JACoW-IPAC2023-THPA003
[n] P. Mereu et al., “Details of the Manufacturing Processes of the ESS-DTL Components”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 260-263. doi:10.18429/JACoW-LINAC2018-MOPO124
[n] J. O. Ortola Vidal and M. Vazquez Mu, “Integration of New Siemens S7-1500 PLC Family in UNICOS-CPC: Engineering Challenges and Performance Evaluation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1363. doi:10.18429/JACoW-ICALEPCS2019-WEPHA114
[n] A. M. Barnyakov, A. E. Levichev, Y. D. Chernousov, V. Ivannikov, and I. V. Shebolaev, “RF Antenna Lead”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA019, pp. 284-286.
[n] B. S. Sian et al., “Graphene Coating for the Reduction of the Secondary Electron Yield”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3688-3690. doi:10.18429/JACoW-IPAC2016-THPMY016
[n] E. Syresin et al., “Electron Cooling in NICA Acceleration Complex”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 109-113. doi:10.18429/JACoW-COOL2023-FRPAM1R2
[n] T. Tomimasu et al., “Operation of FIR- and UV-FEL Facilities and FEL Beam Sharing to User's Rooms at the FELI”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4B009, pp. 730-732.
[n] M. Filtz and T. Scholz, “Impedance Calculations for a Coaxial Liner”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1333-1336.
[n] C. N. Barbier, “Status and Future Directions for High Power Neutron Production Targets”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEZBA1, unpublished.
[n] R. Schuhmann, “Improvement in 3D computation of RF-losses in resonant cavities”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB20, pp. 842-844.
[n] A. P. Sabersky, “Fast Beam Monitor Using Synchrotron Light”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 939-941.
[n] A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
[n] M. C. Balk, R. Schuhmann, T. Weiland, F. Caspers, and F. Nolden, “Investigation of Planar Pickup- and Kicker Electrodes for Stochastic Cooling”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO016, pp. 2670-2672.
[n] G. Asova et al., “Recent Measurements of the Longitudinal Phase Space at PITZ”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH009, pp. 342-345.
[n] V. H. Hardion et al., “The MAX IV Laboratory Scientific Data Management”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 206-212. doi:10.18429/JACoW-ICALEPCS2017-TUBPA04
[n] R. Maier, S. Martin, D. Prasuhn, O. W. B. Schult, and I. Zychor, “Beam Parameters at the Internal Target Positions for Experiments in COSY-Juelich”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP104G, pp. 1429-1431.
[n] Q. K. Jia, “The Fabrication and Measurement of the New Insertion Devices of Hefei Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA022, pp. 2177-2180.
[n] G. V. Stupakov, “Longitudinal and Transverse Self-forces in Relativistic Line-charge Beam”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH030, pp. 309-312.
[n] L. Picardi, G. Messina, C. Ronsivalle, and A. Vignati, “The Activity on Linear Accelerators at the ENEA Frascati Center”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-69, pp. 510-512.
[n] R. Sidlow and J. W. G. Thomason, “ISIS Ion Source Operational Experience”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A07, pp. 1625-1627.
[n] K. Yokoyama et al., “Design and Performance of Optics for Multi-Energy Injector Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP008, pp. 46-48.
For LaTeX
Use Complete Form
For BibTeX
References
- O. Calvo, J. Flanz, and T. Russ, “BPM Data Acquisition System for the Bates Pulse Stretcher Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1467-1470.
- D. Hoober and V. J. Buchanan, “Conversion of AGS Ring to Modular Construction”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 867-872.
- J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3908-3911.
- Z. Li et al., “Advanced Modeling of RF Cavities and Components for e+e- Colliders”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E205, pp. 623-625.
- S. Brandenburg, L. P. Roobol, and M. Stokroos, “Sub-Harmonic Bunching With the AGOR Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-30, pp. XX-XX.
- V. Dobishuk, F. Alessio, S. Chernyshenko, O. Okhrimenko, and V. M. Pugatch, “RMS-R3 - Radiation Hard System for Beam, Background and Luminosity Monitoring at the Upgraded LHCb Experiment”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THPP02, unpublished.
- P. Mereu et al., “Design Details of the European Spallation Source Drift Tube LINAC”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 190-192.
- J. Li, J. Feikes, P. Goslawski, M. Ries, M. Ruprecht, and T. Tydecks, “Beam Lifetime Optimization by Adjusting the Sextupoles at the MLS and BESSY”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2837-2839.
- J. Bojowald, J. Dietrich, H. Labus, H. Lawin, and I. Mohos, “Fast Kicker Extraction at COSY-J??lich”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B14, pp. 1708-1710.
- P. Quigley, S. Belomestnykh, and R. Kaplan, “Digital Cryogenic Control System for Superconducting RF Cavities in CESR”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG008, pp. 1437-1439.
- E. Baron and Ch. Ricaud, “Beam Foil Interaction Studies for the Future Stripper of GANIL”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 839-842.
- D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 477-479.
- R. C. York et al., “FRIB: A New Accelerator Facility for the Production of Rare Isotope Beams”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper FROAAU02, pp. 888-894.
- G. Mishra, M. Gehlot, R. Khullar, and B. Chilukamarri, “Progress in development and measurement of an asymmetric magnet pole undulator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM101, pp. 3801-3803.
- W. Song et al., “Study on transverse beam size measurement using Cherenkov diffraction radiation in low-energy electron accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL157, pp. 4836-4838.
- Y. K. Ong, L. Bellan, A. Pisent, M. Comunian, and E. Fagotti, “Beam transfer lines design study for 30-40 mA proton beam for Boron Neutron Capture Therapy facility”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM110, unpublished.
- C. Widmann, A. Santamaria Garcia, A.-S. Mueller, C. Xu, E. Bruendermann, and J. Gethmann, “ROCK-IT – a demonstrator for automation and remote-access to synchrotron beamlines”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS86, unpublished.
- A. P. Sabersky, “Optical Beam Diagnostics on PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2162-2165.
- O. Naumann, K. Obermann, and T. Scholz, “Comparison between Impedance Measurements and Analytical Calculations”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1330-1333.
- B. S. Kim, K. R. Kim, J. S. Lee, and S.-Y. Lee, “Enhancement of Mechanical Properties of High Chromium Steel by Nitrogen Ion Implantation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH183, pp. 2361-2363.
- R. Schneider, J. Rainwater, and P. Yen, “Nevis Synchrocyclotron Conversion Program-RF System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 303-307.
- H. H. Kannowade, “Design of the New RF-System for the 600 MeV-Synchro Cyclotron at CERN”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 315-319.
- R. Khullar, M. Gehlot, H. Jeevakhan, S. M. Khan, and G. Mishra, “Laser Instrumentation and Insertion Device Measurement System”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2513-2516.
- A. Sessler, “Einstein: His Impact on Accelerators; His Impact on the World”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOOB001, pp. XX-XX.
- H. J. Kim and T. Sen, “Recent Improvement of Tracking Code BBSIMC”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC022, pp. 304-307.
- L. A. Builta, J. C. Elliott, D. C. Moir, T. P. Starke, and C. A. Vecere, “PHERMEX Electron Gun Development”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2728-2731.
- H. Umezawa, M. Yamanaka, and N. Nishida, “Study on the strength of large grain sliced niobium discs”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS65, unpublished.
- W. C. Barkley et al., “First Results of the Analytical Method Used to Reduce Downtime Risk at an Accelerator Facility”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4349-4351.
- A. Ropert et al., “Accelerator Physics Trends at the ESRF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG05, pp. 167-170.
- A. Halavanau, D. Cocco, E. Hemsing, G. Marcus, D. S. Morton, and G. R. Wilcox, “Two Color Grating design for Soft X-Ray Self-Seeding at LCLS-II”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 361-364.
- C. Swain, A. Dixon, C. Welsch, and J. Wolfenden, “Synchrotron radiation simulations for the development of a coherent synchrotron radiation bunch length monitor”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA003, pp. 3956-3958.
- P. Mereu et al., “Details of the Manufacturing Processes of the ESS-DTL Components”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 260-263.
- J. O. Ortola Vidal and M. Vazquez Mu, “Integration of New Siemens S7-1500 PLC Family in UNICOS-CPC: Engineering Challenges and Performance Evaluation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1363.
- A. M. Barnyakov, A. E. Levichev, Y. D. Chernousov, V. Ivannikov, and I. V. Shebolaev, “RF Antenna Lead”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA019, pp. 284-286.
- B. S. Sian et al., “Graphene Coating for the Reduction of the Secondary Electron Yield”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3688-3690.
- E. Syresin et al., “Electron Cooling in NICA Acceleration Complex”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper FRPAM1R2, pp. 109-113.
- T. Tomimasu et al., “Operation of FIR- and UV-FEL Facilities and FEL Beam Sharing to User's Rooms at the FELI”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4B009, pp. 730-732.
- M. Filtz and T. Scholz, “Impedance Calculations for a Coaxial Liner”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1333-1336.
- C. N. Barbier, “Status and Future Directions for High Power Neutron Production Targets”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEZBA1, unpublished.
- R. Schuhmann, “Improvement in 3D computation of RF-losses in resonant cavities”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB20, pp. 842-844.
- A. P. Sabersky, “Fast Beam Monitor Using Synchrotron Light”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 939-941.
- A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
- M. C. Balk, R. Schuhmann, T. Weiland, F. Caspers, and F. Nolden, “Investigation of Planar Pickup- and Kicker Electrodes for Stochastic Cooling”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO016, pp. 2670-2672.
- G. Asova et al., “Recent Measurements of the Longitudinal Phase Space at PITZ”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH009, pp. 342-345.
- V. H. Hardion et al., “The MAX IV Laboratory Scientific Data Management”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 206-212.
- R. Maier, S. Martin, D. Prasuhn, O. W. B. Schult, and I. Zychor, “Beam Parameters at the Internal Target Positions for Experiments in COSY-Juelich”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP104G, pp. 1429-1431.
- Q. K. Jia, “The Fabrication and Measurement of the New Insertion Devices of Hefei Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA022, pp. 2177-2180.
- G. V. Stupakov, “Longitudinal and Transverse Self-forces in Relativistic Line-charge Beam”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH030, pp. 309-312.
- L. Picardi, G. Messina, C. Ronsivalle, and A. Vignati, “The Activity on Linear Accelerators at the ENEA Frascati Center”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-69, pp. 510-512.
- R. Sidlow and J. W. G. Thomason, “ISIS Ion Source Operational Experience”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A07, pp. 1625-1627.
- K. Yokoyama et al., “Design and Performance of Optics for Multi-Energy Injector Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP008, pp. 46-48.
Back to search