Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. M. Polozov, A. S. Plastun, and P. R. Safikanov, “Optimization of IH-DTL Resonator for UNDULAC-RF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC039, pp. 160-162.
[n] G.-H. Luo et al., “Operation Experience of Top-up injection at Taiwan Light Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA034, pp. 151-153.
[n] E. Lin, C.-K. Ng, and K. Ko, “HOM Power Generation and Propagation in the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P028, pp. 3033-3035.
[n] V. L. Uvarov et al., “Beam-power Calibration System for Industrial Electron Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT141, pp. 2167-2169.
[n] Y. Shobuda et al., “Coupled Bunch Instability and Its Cure at J-PARC RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2946-2949. doi:10.18429/JACoW-IPAC2017-WEPIK014
[n] H. Fukuma et al., “Beam Instrumentation for the SuperKEKB Rings”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB01, pp. 6-10.
[n] B. C. Brown, “Collimation System for Beam Loss Localization with Slip Stacking Injection in the Fermilab Main Injector”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC11, pp. 312-319.
[n] N. Kuklev, Y. K. Kim, and A. L. Romanov, “Synchrotron Radiation Beam Diagnostics for the Integrable Optics Test Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2073-2076. doi:10.18429/JACoW-IPAC2018-WEPAG005
[n] B. Cox, P. O. Mazur, and A. Van Ginneken, “Sensitivity of an Energy Doubler Dipole to Beam Induced Quenches”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3885-3888.
[n] G. Olea and N. Huber, “OCTOGLIDE - Table Positioning Device for Diffraction Applications”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 38-40. doi:10.18429/JACoW-MEDSI2016-MOPE17
[n] Ch. Wang, L. H. Chang, K. T. Hsu, C. C. Kuo, W. K. Lau, and G. H. Luo, “Preliminary Study on SRRC Storage Ring Impedance”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1099-1102.
[n] H. Kobayashi, T. Adachi, T. Kawakubo, and X. Liu, “SI-Thyristor Matrix Array Driven Electrostatic Injection Kicker for the KEK Digital Accelerator and Beam Dynamics Analysis of Injection”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA26, pp. 101-103.
[n] A. Sounas, M. Gasior, and T. Lefevre, “BPM Technologies for Quadrupolar Moment Measurements”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 399-403. doi:10.18429/JACoW-HB2018-THA1WE03
[n] E. Lessner and M. White, “Bremsstrahlung Pair-Production of Positrons with Low Neutron Background”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4100, pp. 306-308.
[n] K. Endo et al., “Software System for the Operation of the TRISTAN-AR Power Supply”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2926-2929.
[n] E. Sombrowski, O. Hensler, R. Kammering, K. Rehlich, and A. Petrosyan, “First Experiences with a Central Error Server Using Web Services”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper FR112, pp. XX-XX.
[n] G. Rumolo and E. M?®tral, “Simulations of Single Bunch Collective Effects Using HEADTAIL”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA2IS02, pp. 59-64.
[n] S. Fartoukh and J.-B. Jeanneret, “Using Microwave Quadrupoles to Shorten the CLIC Beam Delivery Section”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B15, pp. 480-482.
[n] Y. Zhang, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design of Cold Beam Position Monitor for CADS Injector II Proton LINAC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC13, pp. 75-77.
[n] C. Perkins et al., “Vacuum System Design for the PEP-II B Factory High-Energy Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2482-2485.
[n] F. Ruggiero, “Consequences of the Discontinuous Replacement of Radiated Energy on the Performance of LEP 200”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1298-1301.
[n] M. Comunian, E. Fagotti, A. Pisent, and P. A. Posocco, “Beam Dynamics of the IFMIF-EVEDA RFQ”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP075, pp. 3536-3538.
[n] G.-H. Luo et al., “Testing Results of Major Components and Progress Report of TLS Superconducting Cavity Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO033, pp. 2262-2264.
[n] A. Sumbaev, “IREN Test Facility at JINR”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP68, pp. 505-507.
[n] K. L. F. Bane, G. V. Stupakov, and J. Tu, “Reflectivity Measurements for Copper and Aluminum in the Far Infrared and the Resistive Wall Impedance in the LCLS Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH073, pp. 2955-2957.
[n] Y. Hashimoto et al., “Beam Profile Monitor for Slow Extracted Beam Using Multi-Layered Graphene at J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2532-2535. doi:10.18429/JACoW-IPAC2019-WEPGW030
[n] C. E. Reece, A. C. Crawford, and R. L. Geng, “Improved Performance of JLab 7-Cell Cavities by Electropolishing”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP055, pp. 2126-2128.
[n] I. Agapov, T. Charles, and E. Musa, “Orbit-response based optics corrections for FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3143-3146. doi:10.18429/JACoW-IPAC2023-WEPL017
[n] G. Baud, B. Dehning, J. Emery, J-J. Gras, A. Guerrero, and E. P. Piselli, “Performance Assessment of Wire-Scanners at CERN”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF03, pp. 499-502.
For LaTeX
Use Complete Form
For BibTeX
References
- S. M. Polozov, A. S. Plastun, and P. R. Safikanov, “Optimization of IH-DTL Resonator for UNDULAC-RF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC039, pp. 160-162.
- G.-H. Luo et al., “Operation Experience of Top-up injection at Taiwan Light Source”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA034, pp. 151-153.
- E. Lin, C.-K. Ng, and K. Ko, “HOM Power Generation and Propagation in the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P028, pp. 3033-3035.
- V. L. Uvarov et al., “Beam-power Calibration System for Industrial Electron Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT141, pp. 2167-2169.
- Y. Shobuda et al., “Coupled Bunch Instability and Its Cure at J-PARC RCS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2946-2949.
- H. Fukuma et al., “Beam Instrumentation for the SuperKEKB Rings”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOCB01, pp. 6-10.
- B. C. Brown, “Collimation System for Beam Loss Localization with Slip Stacking Injection in the Fermilab Main Injector”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC11, pp. 312-319.
- N. Kuklev, Y. K. Kim, and A. L. Romanov, “Synchrotron Radiation Beam Diagnostics for the Integrable Optics Test Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2073-2076.
- B. Cox, P. O. Mazur, and A. Van Ginneken, “Sensitivity of an Energy Doubler Dipole to Beam Induced Quenches”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3885-3888.
- G. Olea and N. Huber, “OCTOGLIDE - Table Positioning Device for Diffraction Applications”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 38-40.
- Ch. Wang, L. H. Chang, K. T. Hsu, C. C. Kuo, W. K. Lau, and G. H. Luo, “Preliminary Study on SRRC Storage Ring Impedance”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1099-1102.
- H. Kobayashi, T. Adachi, T. Kawakubo, and X. Liu, “SI-Thyristor Matrix Array Driven Electrostatic Injection Kicker for the KEK Digital Accelerator and Beam Dynamics Analysis of Injection”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA26, pp. 101-103.
- A. Sounas, M. Gasior, and T. Lefevre, “BPM Technologies for Quadrupolar Moment Measurements”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 399-403.
- E. Lessner and M. White, “Bremsstrahlung Pair-Production of Positrons with Low Neutron Background”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4100, pp. 306-308.
- K. Endo et al., “Software System for the Operation of the TRISTAN-AR Power Supply”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2926-2929.
- E. Sombrowski, O. Hensler, R. Kammering, K. Rehlich, and A. Petrosyan, “First Experiences with a Central Error Server Using Web Services”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper FR112, pp. XX-XX.
- G. Rumolo and E. M?®tral, “Simulations of Single Bunch Collective Effects Using HEADTAIL”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOA2IS02, pp. 59-64.
- S. Fartoukh and J.-B. Jeanneret, “Using Microwave Quadrupoles to Shorten the CLIC Beam Delivery Section”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B15, pp. 480-482.
- Y. Zhang, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design of Cold Beam Position Monitor for CADS Injector II Proton LINAC”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC13, pp. 75-77.
- C. Perkins et al., “Vacuum System Design for the PEP-II B Factory High-Energy Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2482-2485.
- F. Ruggiero, “Consequences of the Discontinuous Replacement of Radiated Energy on the Performance of LEP 200”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1298-1301.
- M. Comunian, E. Fagotti, A. Pisent, and P. A. Posocco, “Beam Dynamics of the IFMIF-EVEDA RFQ”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP075, pp. 3536-3538.
- G.-H. Luo et al., “Testing Results of Major Components and Progress Report of TLS Superconducting Cavity Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO033, pp. 2262-2264.
- A. Sumbaev, “IREN Test Facility at JINR”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP68, pp. 505-507.
- K. L. F. Bane, G. V. Stupakov, and J. Tu, “Reflectivity Measurements for Copper and Aluminum in the Far Infrared and the Resistive Wall Impedance in the LCLS Undulator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH073, pp. 2955-2957.
- Y. Hashimoto et al., “Beam Profile Monitor for Slow Extracted Beam Using Multi-Layered Graphene at J-PARC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2532-2535.
- C. E. Reece, A. C. Crawford, and R. L. Geng, “Improved Performance of JLab 7-Cell Cavities by Electropolishing”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP055, pp. 2126-2128.
- I. Agapov, T. Charles, and E. Musa, “Orbit-response based optics corrections for FCC-ee”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL017, pp. 3143-3146.
- G. Baud, B. Dehning, J. Emery, J-J. Gras, A. Guerrero, and E. P. Piselli, “Performance Assessment of Wire-Scanners at CERN”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF03, pp. 499-502.
Back to search