Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Kuroda et al., “Simulation Study of Compact Hard X-ray Source via Laser Compton Scattering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH178, pp. 2346-2348.
[n] O. A. Bezshyyko, K. A. Bezshyyko, A. Dolinskii, I. M. Kadenko, R. V. Yermolenko, and V. G. Ziemann, “Monte Carlo Simulation Model of Internal Pellet Targets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH136, pp. 2239-2241.
[n] E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2781-2784. doi:10.18429/JACoW-IPAC2023-WEPA054
[n] H. Hu, D. Bafia, and Y. K. Kim, “Comparing the Effectiveness of Low Temperature Bake in EP and BCP Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 187-190. doi:10.18429/JACoW-SRF2023-MOPMB040
[n] H. Hu, D. Bafia, and Y.-K. Kim, “Decoupling of nitrogen and oxygen impurities in doped SRF cavities”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB097, unpublished.
[n] H. O. Ogawa, N. S. Sei, K. Y. Yamada, and M. Y. Yasumoto, “Optimization of the NIJI-IV FEL System for the Coherent Harmonic Generation in a Q-switched Regime”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS27, pp. XX-XX.
[n] R. V. Sharankova, M. W. Mwaniki, K. Seiya, and M. E. Wesley, “Diagnostics for LINAC Optimization with Machine Learning”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 139-142. doi:10.18429/JACoW-NAPAC2022-MOPA41
[n] A. Mishin, M. Denney, D. Fischer, S. Proskin, and J. Roylance, “High voltage e-gun for LINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2106-2107. doi:10.18429/JACoW-IPAC2023-TUPL156
[n] S. Nagaitsev et al., “The Development of a Prototype Multi-MeV Electron Cooling System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3745-3748.
[n] A. L. VanDeusen and C. Crist, “High Density Data Recording for SSCL Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2121-2124.
[n] H. Hu, D. Bafia, and Y. K. Kim, “Evaluating the Effects of Nitrogen Doping and Oxygen Doping on SRF Cavity Performance”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1287-1290. doi:10.18429/JACoW-IPAC2022-TUPOTK034
[n] Y. Wada, T. Kubota, and A. Ogata, “Neutral Beam Generation by Laser Irradiation of Thin Foils”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI013, pp. 1747-1749.
[n] M. Migliorati, L. Palumbo, G. Dattoli, and L. Mezi, “A Saw Tooth Instability Model in Storage Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA60, pp. 1219-1221.
[n] R. Kiessling, S. Gewinner, A. Paarmann, W. Sch?Âllkopf, and M. Wolf, “Synchronized Mid-Infrared Pulses at the Fritz Haber Institute IR-FEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 188-191. doi:10.18429/JACoW-FEL2017-MOP059
[n] H. Hu, D. Bafia, and Y.-K. Kim, “Origins of quench in buffered chemical polished and low temperature baked SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3082-3085. doi:10.18429/JACoW-IPAC2023-WEPA190
[n] L. T. Sun et al., “SECRAL II Ion Source Development and the First Commissioning at 28 GHz”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 43-47. doi:10.18429/JACoW-ECRIS2016-TUAO04
[n] D. C. Jones, D. S. Bollinger, V. V. Kapin, and K. Seiya, “Investigation of the Beam Propagation Through the FNAL LEBT”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 597-600. doi:10.18429/JACoW-LINAC2022-TUPORI23
[n] Y. Sumitomo, T. Kubota, K. Harada, L. Soga, T. Sakai, and Y. Hayakawa, “Development of phase locked oscillator FEL for high repetition mid-infrared frequency combs”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 516-518. doi:10.18429/JACoW-LINAC2024-TUPB095
[n] R. Fliller III, A. Drees, D. Gassner, G. T. McIntyre, and D. Trbojevic, “RHIC Collimator Performance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO035, pp. 2673-2675.
[n] I. C. Sheng, S. Sharma, J. Howell, and E. Rotela, “A Conceptual Design and Thermal Analysis of High Heat Load Crotch Absorber”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1497-1500.
[n] R. L. Gluckstern, H. Okamoto, and W. Cheng, “Synchrobetatron Coupling Effects in Alternating Phase Focusing”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 221-224.
[n] I. Hofmann et al., “Review of Beam Dynamics and Space Charge Resonances in High Intensity Linacs”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEYGB001, pp. 74-78.
[n] B. Wang, Y. Wei, Y. Wang, and C. Yu, “Error correction for the high luminosity lattice of the CEPC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 750-752. doi:10.18429/JACoW-IPAC2023-MOPL083
[n] Y. Shiroyanagi et al., “Magnetic Field Calculation of Planar SCUs Using ANSYS Maxwell”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3868-3871. doi:10.18429/JACoW-IPAC2021-THPAB053
[n] E. Beebe et al., “Controls and Diagnostics for the High Current Electron Beam Ion Source at BNL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI001, pp. 1688-1690.
[n] G. J. Caporaso, J. K. Boyd, and A. G. Cole, “Analytical Methods of Electrode Design for a Relativistic Electron Gun”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2605-2608.
[n] J. N. Sandberg, R. Casella, J. Geller, I. Marneris, A. Soukas, and N. Schumburg, “The AGS Main Magnet Power Supply Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP02, pp. 1964-1966.
[n] A. M. Sessler, W. M. Fawley, and E. T. Scharlemann, “Coherence and Linewidth Studies of a 4-nm High Power FEL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1530-1533.
[n] C. W. Schmidt, L. J. Allen, T. K. Kroc, T. L. Owens, and M. B. Popovic, “Time-of-Flight Measurements of Absolute Beam Energy in the Fermilab Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1689-1691.
[n] D. Khan, A. Bogacz, D. Trbojevic, and R. Bodenstein, “Exploratory splitter bend system designs for FFA@CEBAF”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3079-3081. doi:10.18429/JACoW-IPAC2024-THPC38
[n] K. Zenker, M. Justus, and R. Steinbrück, “DALI Control System Considerations”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 547-551. doi:10.18429/JACoW-ICALEPCS2023-TUPDP022
[n] W. Cheng, Z. Zhu, M. Zhao, M. Zhang, and D. Gu, “Start-to-end simulations of microbunching instability based on optimized velocity bunching in linac-driven FELs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 817-820. doi:10.18429/JACoW-IPAC2024-MOPS42
[n] P. A. Kulyavtsev, G. V. Eremeev, S. Posen, B. Tennis, and J. Zasadzinski, “Commissioning of Dedicated Furnace for Nb₃Sn Coatings of 2.6 GHz Single Cell Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 216-218. doi:10.18429/JACoW-SRF2023-MOPMB047
[n] M. Castiglioni, F. Brossa, and B. Weckermann, “Beam Shaping by Means of a Thin Iris”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-16, pp. 654-656.
[n] S. Zhao et al., “Development of Intense Beam Proton Linac in China”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP14, pp. 63-65.
[n] H. Burkhardt et al., “Halo Estimates and Simulations for Linear Colliders”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOCC03, pp. 2041-2043.
[n] J. S. Lunsford, “Design of a Power Amplifier for the LAMPF Proton Storage Ring Transverse Damper System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2952-2955.
[n] S. Biedron et al., “Updates in Efforts to Data Science Enabled MeV Ultrafast Electron Diffraction System”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 397-399. doi:10.18429/JACoW-IPAC2022-MOPOPT057
[n] S. Cooke, A. Vlasov, V. Jabotinski, J. Petillo, and S. Ovtchinnikov, “Geometry-based design of high power RF sources with the Neptune 3D EM-PIC code”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR35, unpublished.
[n] K.-J. Kim, C. Pellegrini, G. Travish, E. T. Scharlemann, and M. Xie, “Performance Characteristics, Optimization, and Error Tolerances of a 4 nm FEL Based on the SLAC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1533-1536.
[n] A. I. Pikin et al., “Recent Results with Au Ions Extracted from an EBIS using an 8A Electron Beam at BNL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI002, pp. 1732-1734.
[n] P. L. Morton and J. R. Rees, “The Design of Low-Beta Insertions for Storage Rings”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 630-635.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Kuroda et al., “Simulation Study of Compact Hard X-ray Source via Laser Compton Scattering”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH178, pp. 2346-2348.
- O. A. Bezshyyko, K. A. Bezshyyko, A. Dolinskii, I. M. Kadenko, R. V. Yermolenko, and V. G. Ziemann, “Monte Carlo Simulation Model of Internal Pellet Targets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH136, pp. 2239-2241.
- E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA054, pp. 2781-2784.
- H. Hu, D. Bafia, and Y. K. Kim, “Comparing the Effectiveness of Low Temperature Bake in EP and BCP Cavities”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB040, pp. 187-190.
- H. Hu, D. Bafia, and Y.-K. Kim, “Decoupling of nitrogen and oxygen impurities in doped SRF cavities”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB097, unpublished.
- H. O. Ogawa, N. S. Sei, K. Y. Yamada, and M. Y. Yasumoto, “Optimization of the NIJI-IV FEL System for the Coherent Harmonic Generation in a Q-switched Regime”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS27, pp. XX-XX.
- R. V. Sharankova, M. W. Mwaniki, K. Seiya, and M. E. Wesley, “Diagnostics for LINAC Optimization with Machine Learning”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 139-142.
- A. Mishin, M. Denney, D. Fischer, S. Proskin, and J. Roylance, “High voltage e-gun for LINAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL156, pp. 2106-2107.
- S. Nagaitsev et al., “The Development of a Prototype Multi-MeV Electron Cooling System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3745-3748.
- A. L. VanDeusen and C. Crist, “High Density Data Recording for SSCL Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2121-2124.
- H. Hu, D. Bafia, and Y. K. Kim, “Evaluating the Effects of Nitrogen Doping and Oxygen Doping on SRF Cavity Performance”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1287-1290.
- Y. Wada, T. Kubota, and A. Ogata, “Neutral Beam Generation by Laser Irradiation of Thin Foils”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI013, pp. 1747-1749.
- M. Migliorati, L. Palumbo, G. Dattoli, and L. Mezi, “A Saw Tooth Instability Model in Storage Rings”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA60, pp. 1219-1221.
- R. Kiessling, S. Gewinner, A. Paarmann, W. Sch?Âllkopf, and M. Wolf, “Synchronized Mid-Infrared Pulses at the Fritz Haber Institute IR-FEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 188-191.
- H. Hu, D. Bafia, and Y.-K. Kim, “Origins of quench in buffered chemical polished and low temperature baked SRF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA190, pp. 3082-3085.
- L. T. Sun et al., “SECRAL II Ion Source Development and the First Commissioning at 28 GHz”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 43-47.
- D. C. Jones, D. S. Bollinger, V. V. Kapin, and K. Seiya, “Investigation of the Beam Propagation Through the FNAL LEBT”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 597-600.
- Y. Sumitomo, T. Kubota, K. Harada, L. Soga, T. Sakai, and Y. Hayakawa, “Development of phase locked oscillator FEL for high repetition mid-infrared frequency combs”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 516-518.
- R. Fliller III, A. Drees, D. Gassner, G. T. McIntyre, and D. Trbojevic, “RHIC Collimator Performance”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO035, pp. 2673-2675.
- I. C. Sheng, S. Sharma, J. Howell, and E. Rotela, “A Conceptual Design and Thermal Analysis of High Heat Load Crotch Absorber”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1497-1500.
- R. L. Gluckstern, H. Okamoto, and W. Cheng, “Synchrobetatron Coupling Effects in Alternating Phase Focusing”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 221-224.
- I. Hofmann et al., “Review of Beam Dynamics and Space Charge Resonances in High Intensity Linacs”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEYGB001, pp. 74-78.
- B. Wang, Y. Wei, Y. Wang, and C. Yu, “Error correction for the high luminosity lattice of the CEPC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL083, pp. 750-752.
- Y. Shiroyanagi et al., “Magnetic Field Calculation of Planar SCUs Using ANSYS Maxwell”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3868-3871.
- E. Beebe et al., “Controls and Diagnostics for the High Current Electron Beam Ion Source at BNL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI001, pp. 1688-1690.
- G. J. Caporaso, J. K. Boyd, and A. G. Cole, “Analytical Methods of Electrode Design for a Relativistic Electron Gun”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2605-2608.
- J. N. Sandberg, R. Casella, J. Geller, I. Marneris, A. Soukas, and N. Schumburg, “The AGS Main Magnet Power Supply Upgrade”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP02, pp. 1964-1966.
- A. M. Sessler, W. M. Fawley, and E. T. Scharlemann, “Coherence and Linewidth Studies of a 4-nm High Power FEL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1530-1533.
- C. W. Schmidt, L. J. Allen, T. K. Kroc, T. L. Owens, and M. B. Popovic, “Time-of-Flight Measurements of Absolute Beam Energy in the Fermilab Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1689-1691.
- D. Khan, A. Bogacz, D. Trbojevic, and R. Bodenstein, “Exploratory splitter bend system designs for FFA@CEBAF”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC38, pp. 3079-3081.
- K. Zenker, M. Justus, and R. Steinbrück, “DALI Control System Considerations”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP022, pp. 547-551.
- W. Cheng, Z. Zhu, M. Zhao, M. Zhang, and D. Gu, “Start-to-end simulations of microbunching instability based on optimized velocity bunching in linac-driven FELs”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS42, pp. 817-820.
- P. A. Kulyavtsev, G. V. Eremeev, S. Posen, B. Tennis, and J. Zasadzinski, “Commissioning of Dedicated Furnace for Nb₃Sn Coatings of 2.6 GHz Single Cell Cavities”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB047, pp. 216-218.
- M. Castiglioni, F. Brossa, and B. Weckermann, “Beam Shaping by Means of a Thin Iris”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-16, pp. 654-656.
- S. Zhao et al., “Development of Intense Beam Proton Linac in China”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP14, pp. 63-65.
- H. Burkhardt et al., “Halo Estimates and Simulations for Linear Colliders”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOCC03, pp. 2041-2043.
- J. S. Lunsford, “Design of a Power Amplifier for the LAMPF Proton Storage Ring Transverse Damper System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2952-2955.
- S. Biedron et al., “Updates in Efforts to Data Science Enabled MeV Ultrafast Electron Diffraction System”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 397-399.
- S. Cooke, A. Vlasov, V. Jabotinski, J. Petillo, and S. Ovtchinnikov, “Geometry-based design of high power RF sources with the Neptune 3D EM-PIC code”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR35, unpublished.
- K.-J. Kim, C. Pellegrini, G. Travish, E. T. Scharlemann, and M. Xie, “Performance Characteristics, Optimization, and Error Tolerances of a 4 nm FEL Based on the SLAC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1533-1536.
- A. I. Pikin et al., “Recent Results with Au Ions Extracted from an EBIS using an 8A Electron Beam at BNL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI002, pp. 1732-1734.
- P. L. Morton and J. R. Rees, “The Design of Low-Beta Insertions for Storage Rings”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 630-635.
Back to search