Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Pana, A. Curcio, and A. I. Wawrzyniak, “LUMOS: A Visible Diagnostic Beamline for the Solaris Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3901-3903. doi:10.18429/JACoW-IPAC2021-THPAB064
[n] A. T. Wu, S. Jin, J. D. Mammosser, R. A. Rimmer, X. Y. Lu, and K. Zhao, “Effects of the Thickness of Niobium Surface Oxide Layers on Field Emission”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC118, pp. 355-357.
[n] Z. Wang et al., “Buffered chemical polishing process for SHINE 3.9 GHz cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2798-2801. doi:10.18429/JACoW-IPAC2024-WEPS46
[n] P. M. Strubin and J.-P. Bojon, “Reliability of the LEP Vacuum System: Experience and Analysis”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPE06, pp. 2014-2016.
[n] C. Rossi et al., “Commissioning of the Linac4 RFQ at the 3 MeV Test Stand”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO082, pp. 3951-3953.
[n] G. W. Kowalski, K. Gula, R. Pana, A. I. Wawrzyniak, and J. J. Wiechecki, “Design and Status of Fast Orbit Feedback System at SOLARIS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1059-1062. doi:10.18429/JACoW-IPAC2022-TUPOPT026
[n] S. Wang, M. D. Cropper, O. B. Malyshev, E. A. Seddon, and R. Valizadeh, “The Secondary Electron Yield from Transition Metals”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2403-2405. doi:10.18429/JACoW-IPAC2014-WEPME057
[n] S. L. Kramer, E. A. Crosbie, S. Kim, R. Wehrle, and M. Yoon, “Vacuum Chamber Themal Protection for the APS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 586-589.
[n] L. Tchelidze and J. Stovall, “Beam Loss Limits in High Power Proton Linear Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO075, pp. 3930-3932.
[n] J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
[n] H. Tarawneh, M. Ebbeni, M. Gehlot, and M. Holz, “Insertion Devices at the MAX IV 3 GeV Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3865-3867. doi:10.18429/JACoW-IPAC2021-THPAB052
[n] K. Ohmi, “Study of Beam-beam effect at various collision scheme in LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP034, pp. 2593-2595.
[n] W. W. Lee and L. C. Teng, “Beam Bunch Length Matching at Transition Crossing with Space-Charge Forces”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1057-1062.
[n] L. M. Bollinger and K. W. Shepard, “Concept of a Superconducting Linac for Low-Velocity Ions”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEQ0001, pp. 217-219.
[n] N. Kamikubota et al., “Operation Experience and Migration of I/O Controllers for J-PARC Main Ring”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 101-104. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO09
[n] J. Dietrich, A. H. Botha, J. L. Conradie, J. L. G. Delsink, I. Mohos, and P. F. Rohwer, “Beam Position Monitor Development for the IThemba LABS Cyclotron Beamlines”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT047, pp. 2589-2591.
[n] W. Fischer et al., “First Experience with Electron Lenses for Beam-beam Compensation in RHIC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 913-917. doi:10.18429/JACoW-IPAC2014-TUYA01
[n] Y. R. Roblin and T. Larrieu, “Online Model Server for the Jefferson Lab Accelerator”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP012, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Pana, A. Curcio, and A. I. Wawrzyniak, “LUMOS: A Visible Diagnostic Beamline for the Solaris Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3901-3903.
- A. T. Wu, S. Jin, J. D. Mammosser, R. A. Rimmer, X. Y. Lu, and K. Zhao, “Effects of the Thickness of Niobium Surface Oxide Layers on Field Emission”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC118, pp. 355-357.
- Z. Wang et al., “Buffered chemical polishing process for SHINE 3.9 GHz cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS46, pp. 2798-2801.
- P. M. Strubin and J.-P. Bojon, “Reliability of the LEP Vacuum System: Experience and Analysis”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPE06, pp. 2014-2016.
- C. Rossi et al., “Commissioning of the Linac4 RFQ at the 3 MeV Test Stand”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO082, pp. 3951-3953.
- G. W. Kowalski, K. Gula, R. Pana, A. I. Wawrzyniak, and J. J. Wiechecki, “Design and Status of Fast Orbit Feedback System at SOLARIS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1059-1062.
- S. Wang, M. D. Cropper, O. B. Malyshev, E. A. Seddon, and R. Valizadeh, “The Secondary Electron Yield from Transition Metals”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2403-2405.
- S. L. Kramer, E. A. Crosbie, S. Kim, R. Wehrle, and M. Yoon, “Vacuum Chamber Themal Protection for the APS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 586-589.
- L. Tchelidze and J. Stovall, “Beam Loss Limits in High Power Proton Linear Accelerators”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO075, pp. 3930-3932.
- J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
- H. Tarawneh, M. Ebbeni, M. Gehlot, and M. Holz, “Insertion Devices at the MAX IV 3 GeV Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3865-3867.
- K. Ohmi, “Study of Beam-beam effect at various collision scheme in LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP034, pp. 2593-2595.
- W. W. Lee and L. C. Teng, “Beam Bunch Length Matching at Transition Crossing with Space-Charge Forces”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1057-1062.
- L. M. Bollinger and K. W. Shepard, “Concept of a Superconducting Linac for Low-Velocity Ions”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WEQ0001, pp. 217-219.
- N. Kamikubota et al., “Operation Experience and Migration of I/O Controllers for J-PARC Main Ring”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 101-104.
- J. Dietrich, A. H. Botha, J. L. Conradie, J. L. G. Delsink, I. Mohos, and P. F. Rohwer, “Beam Position Monitor Development for the IThemba LABS Cyclotron Beamlines”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT047, pp. 2589-2591.
- W. Fischer et al., “First Experience with Electron Lenses for Beam-beam Compensation in RHIC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 913-917.
- Y. R. Roblin and T. Larrieu, “Online Model Server for the Jefferson Lab Accelerator”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP012, pp. XX-XX.
Back to search