Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 47-50. doi:10.18429/JACoW-NAPAC2019-MOYBB6
[n] Y. Shiroyanagi et al., “Thermal Modeling of the Prototype Superconducting Undulator (SCU0)”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC07, pp. 1151-1153.
[n] T. Satogata, J. Cardona, V. Ptitsyn, S. Tepikian, and J. van Zeijts, “Linear Optics during the RHIC 2001-2 Run”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE049, pp. 1187-1189.
[n] A. C. Mezger, “caQtDM, an EPICS Display Manager Based on Qt”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC121, pp. 864-866.
[n] B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1046-1048.
[n] J. P. Rigla, S. Ferrer, Yu. A. Kubyshin, A. V. Poseryaev, and V. I. Shvedunov, “Compact Design of Race-track Microtron Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC159, pp. 2380-2382.
[n] H. Mizuno, Y. Kobayashi, T. Majima, and S. Sakamoto, “A Blumlein Type Modulator for a 100 MW-class X-band Klystron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2538-2541.
[n] V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
[n] D. Bulfone, M. Lonza, P. Michelini, and L. Pasquali, “The Design of the Energy Ramping System for ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1809-1812.
[n] C. Thiebaux et al., “Development of a Transparent Profiler Based on Secondary Electrons Emission for Charged Particle Beams”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 302-304. doi:10.18429/JACoW-CYCLOTRONS2019-THB04
[n] R. Amirikas, A. Bertolini, J. Eschke, B. Faatz, and M. Lomperski, “Vibration Stability Studies of a Type III+ XFEL/FLASH Superconducting Accelerating Module Operating at 2K”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH078, pp. 421-424.
[n] F. Gougnaud, Y. Lussignol, J. F. Denis, F. Gohier, and T. J. Joannem, “CEA Irfu EPICS Environment for the SARAF-LINAC Project”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1335-1339. doi:10.18429/JACoW-ICALEPCS2017-THPHA001
[n] K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
[n] M. Patecki, A. Mereghetti, D. Mirarchi, and S. Redaelli, “Conceptual Design of a Collimation System for the CERN Super Proton Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 802-805. doi:10.18429/JACoW-IPAC2018-TUPAF046
[n] H. Danared, A. Källberg, K.-G. Rensfelt, and A. Simonsson, “Observations of Ordered Ion Beams in CRYRING”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH165, pp. 2038-2040.
[n] T. K. Charles, D. M. Paganin, M. J. Boland, and R. T. Dowd, “Beam by Design: Current Pulse Shaping Through Longitudinal Dispersion Control”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 644-647. doi:10.18429/JACoW-IPAC2017-MOPIK055
[n] J. C. McNeur, J. B. Rosenzweig, G. Travish, J. Zhou, and R. B. Yoder, “Resonance, Particle Stability, and Acceleration in the Micro-Accelerator Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP010, pp. 121-123.
[n] K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957.
[n] T. Masuda, T. Fukui, T. Kudo, T. Ohata, and R. T. Tanaka, “Evaluation and Improvement of PoE-based Temperature Measurement Module”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP018, pp. 207-209.
[n] M. Pezzetti, H. Coppier, and D. O. Tavares, “Advanced Control Facility for the Cern-Unicos Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP060, pp. 516-518.
[n] N. Yamamoto et al., “Study of the Coherent Terahertz Radiation by Laser Bunch Slicing at UVSOR-II Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA037, pp. 2570-2572.
[n] Y. K. Batygin, C. Pillai, and L. Rybarcyk, “Space-charge Effects in H- Low-energy Beam Transport of LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS5, pp. 64-66.
[n] G. D'Auria, “Application of X-band Linacs”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper WE1A03, pp. 724-728.
[n] H. Zheng, H. Cao, and Y. X. Chen, “Design of PLC Temperature Flow Acquisition System Based on EPICS”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 109-110. doi:10.18429/JACoW-PCaPAC2018-WEP31
[n] B. P. Bielawski, F. Locci, and S. Magnoni, “CLIC-ACM: Acquisition and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBB06, pp. 1404-1407.
[n] A. Miura, “Progress of Beam Instumentation in J-PARC Linac”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOIA02, pp. XX-XX.
[n] E. Bjorklund, “Replacing the Engine in Your Car While You Are Still Driving It”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1131-1133. doi:10.18429/JACoW-ICALEPCS2015-THHC2O03
[n] G. De Ninno, A. Antoniazzi, B. Diviacco, D. Fanelli, R. Meucci, and M. Trovo, “Stabilization of the Elettra Storage-Ring Free-Electron Laser using a Derivative Feedback”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP007, pp. XX-XX.
[n] O. Henry and A. Mosnier, “Superconducting Cavities Calculations for a B-Factory”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 877-880.
[n] S. D. Holmes, J. A. Holt, J. Johnstone, J. Marriner, M. Martens, and D. McGinnis, “132 nsec Bunch Spacing in the Tevatron Proton-Antiproton Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP01, pp. 434-436.
[n] C.-H. Chang et al., “In-Achromatic Superconducting Wiggler in Taiwan Light Source: Installation and Test Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS139, pp. 3613-3615.
[n] J. L. L?â et al., “ADAPOS: An Architecture for Publishing ALICE DCS Conditions Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 482-485. doi:10.18429/JACoW-ICALEPCS2017-TUPHA042
[n] B. M. Campbell, M. J. Fagan, J. P. Kelley, A. D. Puckett, R. Valicenti, and J. A. Waynert, “Engineering Design of the APT Cryomodules”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4096, pp. 983-985.
[n] Y. Cho et al., “Feasibility Study of a 1-MW Pulsed Spallation Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP05, pp. 363-365.
[n] N. Solyak et al., “PXIE at FNAL”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3B03, pp. 414-418.
[n] C. Vicario et al., “Timing Jitter Measurements of the SwissFEL Test Injector”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO77, pp. 140-143.
[n] A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
[n] F. Toufexis, J. Neilson, and S. G. Tantawi, “Coupling and Polarization Control in a mm-wave Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1647-1650. doi:10.18429/JACoW-IPAC2017-TUPAB136
[n] N. Patel et al., “Beam Position Monitoring System for the PIP-II Injector Test Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 349-351. doi:10.18429/JACoW-NAPAC2016-TUPOA29
[n] J. R. Boyce, S. Heifets, and G. A. Krafft, “Simulations of High Disruption Colliding Beams”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH449, pp. 724-726.
[n] G. Bassi, J. A. Ellison, and R. L. Warnock, “Progress on a Vlasov Treatment of Coherent Synchrotron Radiation from Arbitrary Planar Orbits”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT042, pp. 2699-2701.
[n] C. A. Larrieu and M. H. Bickley, “Software Design Concepts for Archiving and Retrieving Control System Data”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP075, pp. XX-XX.
[n] B. Dehning et al., “Experimental Evidence for Multi-pass Extraction with a Bent Crystal”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP14, pp. 470-472.
[n] O. O. Andreassen, L. Arnaudon, I. T. Matasaho, and A. Rijllart, “Low Cost FFT Scope using LabVIEW cRIO and FPGA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC095, pp. 801-804.
[n] Y. Funahashi et al., “Development of Active Tables for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-50, pp. 816-818.
[n] W. Anders, A. Heugel, H.-G. Hoberg, S. Klauke, G. Mielczarek, and T. Westphal, “Highly Stable IOT Based 1,3 GHz / 16KW RF Power Source for CW Operated SC Linacs”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO045, pp. 679-682.
[n] A. D. Kovalenko et al., “Design and Study of a Superferric Model Dipole and Quadrupole Magnets for the GSI Fast-pulsed Synchrotron SIS100.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF057, pp. 1735-1737.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 47-50.
- Y. Shiroyanagi et al., “Thermal Modeling of the Prototype Superconducting Undulator (SCU0)”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC07, pp. 1151-1153.
- T. Satogata, J. Cardona, V. Ptitsyn, S. Tepikian, and J. van Zeijts, “Linear Optics during the RHIC 2001-2 Run”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE049, pp. 1187-1189.
- A. C. Mezger, “caQtDM, an EPICS Display Manager Based on Qt”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC121, pp. 864-866.
- B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1046-1048.
- J. P. Rigla, S. Ferrer, Yu. A. Kubyshin, A. V. Poseryaev, and V. I. Shvedunov, “Compact Design of Race-track Microtron Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC159, pp. 2380-2382.
- H. Mizuno, Y. Kobayashi, T. Majima, and S. Sakamoto, “A Blumlein Type Modulator for a 100 MW-class X-band Klystron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2538-2541.
- V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
- D. Bulfone, M. Lonza, P. Michelini, and L. Pasquali, “The Design of the Energy Ramping System for ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1809-1812.
- C. Thiebaux et al., “Development of a Transparent Profiler Based on Secondary Electrons Emission for Charged Particle Beams”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 302-304.
- R. Amirikas, A. Bertolini, J. Eschke, B. Faatz, and M. Lomperski, “Vibration Stability Studies of a Type III+ XFEL/FLASH Superconducting Accelerating Module Operating at 2K”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH078, pp. 421-424.
- F. Gougnaud, Y. Lussignol, J. F. Denis, F. Gohier, and T. J. Joannem, “CEA Irfu EPICS Environment for the SARAF-LINAC Project”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1335-1339.
- K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
- M. Patecki, A. Mereghetti, D. Mirarchi, and S. Redaelli, “Conceptual Design of a Collimation System for the CERN Super Proton Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 802-805.
- H. Danared, A. Källberg, K.-G. Rensfelt, and A. Simonsson, “Observations of Ordered Ion Beams in CRYRING”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH165, pp. 2038-2040.
- T. K. Charles, D. M. Paganin, M. J. Boland, and R. T. Dowd, “Beam by Design: Current Pulse Shaping Through Longitudinal Dispersion Control”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 644-647.
- J. C. McNeur, J. B. Rosenzweig, G. Travish, J. Zhou, and R. B. Yoder, “Resonance, Particle Stability, and Acceleration in the Micro-Accelerator Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP010, pp. 121-123.
- K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957.
- T. Masuda, T. Fukui, T. Kudo, T. Ohata, and R. T. Tanaka, “Evaluation and Improvement of PoE-based Temperature Measurement Module”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP018, pp. 207-209.
- M. Pezzetti, H. Coppier, and D. O. Tavares, “Advanced Control Facility for the Cern-Unicos Framework”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP060, pp. 516-518.
- N. Yamamoto et al., “Study of the Coherent Terahertz Radiation by Laser Bunch Slicing at UVSOR-II Electron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA037, pp. 2570-2572.
- Y. K. Batygin, C. Pillai, and L. Rybarcyk, “Space-charge Effects in H- Low-energy Beam Transport of LANSCE”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS5, pp. 64-66.
- G. D'Auria, “Application of X-band Linacs”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper WE1A03, pp. 724-728.
- H. Zheng, H. Cao, and Y. X. Chen, “Design of PLC Temperature Flow Acquisition System Based on EPICS”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 109-110.
- B. P. Bielawski, F. Locci, and S. Magnoni, “CLIC-ACM: Acquisition and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOBB06, pp. 1404-1407.
- A. Miura, “Progress of Beam Instumentation in J-PARC Linac”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOIA02, pp. XX-XX.
- E. Bjorklund, “Replacing the Engine in Your Car While You Are Still Driving It”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1131-1133.
- G. De Ninno, A. Antoniazzi, B. Diviacco, D. Fanelli, R. Meucci, and M. Trovo, “Stabilization of the Elettra Storage-Ring Free-Electron Laser using a Derivative Feedback”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP007, pp. XX-XX.
- O. Henry and A. Mosnier, “Superconducting Cavities Calculations for a B-Factory”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 877-880.
- S. D. Holmes, J. A. Holt, J. Johnstone, J. Marriner, M. Martens, and D. McGinnis, “132 nsec Bunch Spacing in the Tevatron Proton-Antiproton Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAP01, pp. 434-436.
- C.-H. Chang et al., “In-Achromatic Superconducting Wiggler in Taiwan Light Source: Installation and Test Results”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS139, pp. 3613-3615.
- J. L. L?â et al., “ADAPOS: An Architecture for Publishing ALICE DCS Conditions Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 482-485.
- B. M. Campbell, M. J. Fagan, J. P. Kelley, A. D. Puckett, R. Valicenti, and J. A. Waynert, “Engineering Design of the APT Cryomodules”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4096, pp. 983-985.
- Y. Cho et al., “Feasibility Study of a 1-MW Pulsed Spallation Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP05, pp. 363-365.
- N. Solyak et al., “PXIE at FNAL”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3B03, pp. 414-418.
- C. Vicario et al., “Timing Jitter Measurements of the SwissFEL Test Injector”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO77, pp. 140-143.
- A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
- F. Toufexis, J. Neilson, and S. G. Tantawi, “Coupling and Polarization Control in a mm-wave Undulator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1647-1650.
- N. Patel et al., “Beam Position Monitoring System for the PIP-II Injector Test Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 349-351.
- J. R. Boyce, S. Heifets, and G. A. Krafft, “Simulations of High Disruption Colliding Beams”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH449, pp. 724-726.
- G. Bassi, J. A. Ellison, and R. L. Warnock, “Progress on a Vlasov Treatment of Coherent Synchrotron Radiation from Arbitrary Planar Orbits”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT042, pp. 2699-2701.
- C. A. Larrieu and M. H. Bickley, “Software Design Concepts for Archiving and Retrieving Control System Data”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP075, pp. XX-XX.
- B. Dehning et al., “Experimental Evidence for Multi-pass Extraction with a Bent Crystal”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAP14, pp. 470-472.
- O. O. Andreassen, L. Arnaudon, I. T. Matasaho, and A. Rijllart, “Low Cost FFT Scope using LabVIEW cRIO and FPGA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC095, pp. 801-804.
- Y. Funahashi et al., “Development of Active Tables for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-50, pp. 816-818.
- W. Anders, A. Heugel, H.-G. Hoberg, S. Klauke, G. Mielczarek, and T. Westphal, “Highly Stable IOT Based 1,3 GHz / 16KW RF Power Source for CW Operated SC Linacs”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO045, pp. 679-682.
- A. D. Kovalenko et al., “Design and Study of a Superferric Model Dipole and Quadrupole Magnets for the GSI Fast-pulsed Synchrotron SIS100.”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF057, pp. 1735-1737.
Back to search