Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Benvenuti, D. Boussard, S. Calatroni, E. Chiaveri, and J. T??ckmantel, “Production and Test of 352 MHz Niobium Sputtered Reduced Beta Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D25, pp. 1038-1049.
[n] R. Morita et al., “Development of Yb-Based Laser System for Crab Crossing Laser-Compton Scattering”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3657-3659. doi:10.18429/JACoW-IPAC2019-THPGW035
[n] J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
[n] J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
[n] H. Ohkuma et al., “Beam-Performance Improvement of the SPring-8 Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB025, pp. 881-883.
[n] B. Zipfel and P. Moritz, “Recent Progress on the Technical Realization of the Bunch Phase Timing System BuTiS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC145, pp. 418-420.
[n] H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
[n] J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 238-240. doi:10.18429/JACoW-MEDSI2018-WEPH16
[n] X. Fleury and J.-L. Lemaire, “Numerical Simulations of Space Charge Compensation Effects in Ion Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B12, pp. 1525-1527.
[n] K. Jacobs et al., “The Wisconsin Free Electron Laser Initiative”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4PBC04, pp. 109-111.
[n] K. Hwang, C. E. Mitchell, and R. D. Ryne, “Analysis of the Chromatic Vertical Focusing Effect of Dipole Fringe Fields”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 760-762. doi:10.18429/JACoW-IPAC2021-MOPAB234
[n] L. Fr?Âhlich and O. Grimm, “Bunch Length Measurements Using a Martin-Puplett Interferometer at the VUV-FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP035, pp. XX-XX.
[n] Y. Li, K. Hwang, C. E. Mitchell, R. S. Rainer, R. D. Ryne, and V. V. Smaluk, “Design of Double- and Multi-Bend Achromat Lattices with Large Dynamic Aperture and Approximate Invariants”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1945-1948. doi:10.18429/JACoW-IPAC2021-TUPAB223
[n] H. Ohkuma et al., “Operational Performance of the SPring-8 Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH327, pp. 2824-2826.
[n] P. Le Roux et al., “LHC Reference Database : Towards a Mechanical, Optical and Electrical Layout Database”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT025, pp. 1882-1884.
[n] F.-T. Chung and F.-Y. Chang, “Construction and Installation of a 320kW Solid State Power Amplifier for Taiwan Photo Source.”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM023, unpublished.
[n] M.-C. Chou, W.-Y. Chiang, W.-K. Lau, and C.-M. Tu, “Feasibility study of a THz beamline design for the THz user facility at NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM036, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Benvenuti, D. Boussard, S. Calatroni, E. Chiaveri, and J. T??ckmantel, “Production and Test of 352 MHz Niobium Sputtered Reduced Beta Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D25, pp. 1038-1049.
- R. Morita et al., “Development of Yb-Based Laser System for Crab Crossing Laser-Compton Scattering”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3657-3659.
- J. L. Erickson and D. Rees, “Operational Status and Life Extension Plans for the Los Alamos Neutron Science Center (LANSCE)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP224, pp. 1906-1908.
- J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
- H. Ohkuma et al., “Beam-Performance Improvement of the SPring-8 Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB025, pp. 881-883.
- B. Zipfel and P. Moritz, “Recent Progress on the Technical Realization of the Bunch Phase Timing System BuTiS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC145, pp. 418-420.
- H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
- J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 238-240.
- X. Fleury and J.-L. Lemaire, “Numerical Simulations of Space Charge Compensation Effects in Ion Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B12, pp. 1525-1527.
- K. Jacobs et al., “The Wisconsin Free Electron Laser Initiative”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4PBC04, pp. 109-111.
- K. Hwang, C. E. Mitchell, and R. D. Ryne, “Analysis of the Chromatic Vertical Focusing Effect of Dipole Fringe Fields”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 760-762.
- L. Fr?Âhlich and O. Grimm, “Bunch Length Measurements Using a Martin-Puplett Interferometer at the VUV-FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP035, pp. XX-XX.
- Y. Li, K. Hwang, C. E. Mitchell, R. S. Rainer, R. D. Ryne, and V. V. Smaluk, “Design of Double- and Multi-Bend Achromat Lattices with Large Dynamic Aperture and Approximate Invariants”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1945-1948.
- H. Ohkuma et al., “Operational Performance of the SPring-8 Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH327, pp. 2824-2826.
- P. Le Roux et al., “LHC Reference Database : Towards a Mechanical, Optical and Electrical Layout Database”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT025, pp. 1882-1884.
- F.-T. Chung and F.-Y. Chang, “Construction and Installation of a 320kW Solid State Power Amplifier for Taiwan Photo Source.”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM023, unpublished.
- M.-C. Chou, W.-Y. Chiang, W.-K. Lau, and C.-M. Tu, “Feasibility study of a THz beamline design for the THz user facility at NSRRC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM036, this conference.
Back to search